[PATCH v2 1/4] arm: omap: Add phy binding info for musb in plat data

[kishon@ti.com (Kishon Vijay Abraham I)]

In order for controllers to get PHY in case of non dt boot, the phy
binding information (phy label) should be added in the platform
data of the controller.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 arch/arm/mach-omap2/usb-musb.c |    3 +++
 include/linux/usb/musb.h       |    3 +++
 2 files changed, 6 insertions(+)

diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 8c4de27..20b42de 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -85,6 +85,9 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
 	musb_plat.mode = board_data->mode;
 	musb_plat.extvbus = board_data->extvbus;
 
+	if (cpu_is_omap34xx())
+		musb_plat.phy_name = "twl4030";
+
 	if (soc_is_am35xx()) {
 		oh_name = "am35x_otg_hs";
 		name = "musb-am35x";
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index 053c268..c05d46d 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -104,6 +104,9 @@ struct musb_hdrc_platform_data {
 	/* for clk_get() */
 	const char	*clock;
 
+	/* phy device label */
+	const char	*phy_name;
+
 	/* (HOST or OTG) switch VBUS on/off */
 	int		(*set_vbus)(struct device *dev, int is_on);
 
-- 
1.7.10.4