linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: richard.genoud@gmail.com (Richard Genoud)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/5] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards
Date: Mon,  8 Jul 2013 15:29:49 +0200	[thread overview]
Message-ID: <1373290193-25300-2-git-send-email-richard.genoud@gmail.com> (raw)
In-Reply-To: <1373290193-25300-1-git-send-email-richard.genoud@gmail.com>

From: Nicolas Ferre <nicolas.ferre@atmel.com>

Description of the Asoc machine driver for an at91sam9x5 based board
with a wm8731 audio DAC. Wm8731 is clocked by a crystal and used as a
master on the SSC/I2S interface. Its connections are a headphone jack
and an Line input jack.

[Richard: this is based on an old patch from Nicolas that I forward
ported and reworked to use only device tree]

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
---
 sound/soc/atmel/Kconfig         |   10 ++
 sound/soc/atmel/Makefile        |    2 +
 sound/soc/atmel/sam9x5_wm8731.c |  206 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 218 insertions(+)
 create mode 100644 sound/soc/atmel/sam9x5_wm8731.c

diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
index 1c0b185..9eb8c49 100644
--- a/sound/soc/atmel/Kconfig
+++ b/sound/soc/atmel/Kconfig
@@ -33,6 +33,16 @@ config SND_AT91_SOC_SAM9G20_WM8731
 	  Say Y if you want to add support for SoC audio on WM8731-based
 	  AT91sam9g20 evaluation board.
 
+config SND_AT91_SOC_SAM9X5_WM8731
+	tristate "SoC Audio support for WM8731-based at91sam9x5 board"
+	depends on ATMEL_SSC && SND_ATMEL_SOC && SOC_AT91SAM9X5
+	select SND_ATMEL_SOC_SSC
+	select SND_ATMEL_SOC_DMA
+	select SND_SOC_WM8731
+	help
+	  Say Y if you want to add support for audio SoC on an
+	  at91sam9x5 based board that is using WM8731 codec.
+
 config SND_AT91_SOC_AFEB9260
 	tristate "SoC Audio support for AFEB9260 board"
 	depends on ARCH_AT91 && ATMEL_SSC && ARCH_AT91 && MACH_AFEB9260 && SND_ATMEL_SOC
diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile
index 41967cc..7784c09 100644
--- a/sound/soc/atmel/Makefile
+++ b/sound/soc/atmel/Makefile
@@ -11,6 +11,8 @@ obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o
 
 # AT91 Machine Support
 snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o
+snd-soc-sam9x5-wm8731-objs := sam9x5_wm8731.o
 
 obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o
+obj-$(CONFIG_SND_AT91_SOC_SAM9X5_WM8731) += snd-soc-sam9x5-wm8731.o
 obj-$(CONFIG_SND_AT91_SOC_AFEB9260) += snd-soc-afeb9260.o
diff --git a/sound/soc/atmel/sam9x5_wm8731.c b/sound/soc/atmel/sam9x5_wm8731.c
new file mode 100644
index 0000000..3e5a9f6
--- /dev/null
+++ b/sound/soc/atmel/sam9x5_wm8731.c
@@ -0,0 +1,206 @@
+/*
+ * sam9x5_wm8731   --	SoC audio for AT91SAM9X5-based boards
+ *			that are using WM8731 as codec.
+ *
+ *  Copyright (C) 2011 Atmel,
+ *		  Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Based on sam9g20_wm8731.c by:
+ * Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ *
+ * GPL
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+
+#include <linux/atmel-ssc.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+
+#include "../codecs/wm8731.h"
+#include "atmel-pcm.h"
+#include "atmel_ssc_dai.h"
+
+#define MCLK_RATE 12288000
+
+#define DRV_NAME "sam9x5-snd-wm8731"
+
+/*
+ * Logic for a wm8731 as connected on a at91sam9x5 based board.
+ */
+static int at91sam9x5ek_wm8731_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_codec *codec = rtd->codec;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct snd_soc_dapm_context *dapm = &codec->dapm;
+	struct device *dev = rtd->dev;
+	int ret;
+
+	dev_dbg(dev, "ASoC: %s called\n", __func__);
+
+	codec_dai->driver->playback.rates &= SNDRV_PCM_RATE_8000 |
+		SNDRV_PCM_RATE_32000 |
+		SNDRV_PCM_RATE_48000 |
+		SNDRV_PCM_RATE_96000;
+	codec_dai->driver->capture.rates &= SNDRV_PCM_RATE_8000 |
+		SNDRV_PCM_RATE_32000 |
+		SNDRV_PCM_RATE_48000 |
+		SNDRV_PCM_RATE_96000;
+
+	/* set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_XTAL,
+				     MCLK_RATE, SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(dev, "ASoC: Failed to set WM8731 SYSCLK: %d\n", ret);
+		return ret;
+	}
+
+	/* signal a DAPM event */
+	snd_soc_dapm_sync(dapm);
+	return 0;
+}
+
+/*
+ * Audio paths on at91sam9x5ek board:
+ *
+ *  |A| ------------> |      | ---R----> Headphone Jack
+ *  |T| <----\        |  WM  | ---L--/
+ *  |9| ---> CLK <--> | 8751 | <--R----- Line In Jack
+ *  |1| <------------ |      | <--L--/
+ */
+static const struct snd_soc_dapm_widget at91sam9x5ek_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_LINE("Line In Jack", NULL),
+};
+
+static struct snd_soc_dai_link at91sam9x5ek_dai = {
+	.name = "WM8731",
+	.stream_name = "WM8731 PCM",
+	.codec_dai_name = "wm8731-hifi",
+	.init = at91sam9x5ek_wm8731_init,
+};
+
+static struct snd_soc_card snd_soc_at91sam9x5ek = {
+	.owner = THIS_MODULE,
+	.dai_link = &at91sam9x5ek_dai,
+	.num_links = 1,
+	.dapm_widgets = at91sam9x5ek_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(at91sam9x5ek_dapm_widgets),
+};
+
+static int sam9x5_wm8731_driver_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *codec_np, *cpu_np;
+	int ret;
+
+	if (!np) {
+		dev_err(&pdev->dev, "No device node supplied\n");
+		return -EINVAL;
+	}
+
+	ret = atmel_ssc_set_audio(0);
+	if (ret != 0) {
+		dev_err(&pdev->dev,
+			"ASoC: Failed to set SSC 0 for audio: %d\n", ret);
+		return ret;
+	}
+
+	snd_soc_at91sam9x5ek.dev = &pdev->dev;
+
+	ret = snd_soc_of_parse_card_name(&snd_soc_at91sam9x5ek, "atmel,model");
+	if (ret)
+		goto out;
+
+	ret = snd_soc_of_parse_audio_routing(&snd_soc_at91sam9x5ek,
+					     "atmel,audio-routing");
+	if (ret)
+		goto out;
+
+	codec_np = of_parse_phandle(np, "atmel,audio-codec", 0);
+	if (!codec_np) {
+		dev_err(&pdev->dev, "codec info missing\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	at91sam9x5ek_dai.codec_of_node = codec_np;
+
+	cpu_np = of_parse_phandle(np, "atmel,ssc-controller", 0);
+	if (!cpu_np) {
+		dev_err(&pdev->dev, "ssc controller node missing\n");
+		ret = -EINVAL;
+		goto out;
+	}
+	at91sam9x5ek_dai.cpu_of_node = cpu_np;
+	at91sam9x5ek_dai.platform_of_node = cpu_np;
+
+	of_node_put(codec_np);
+	of_node_put(cpu_np);
+
+	at91sam9x5ek_dai.dai_fmt = snd_soc_of_parse_daifmt(np, "atmel,");
+
+	ret = snd_soc_register_card(&snd_soc_at91sam9x5ek);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"ASoC: Platform device allocation failed\n");
+		goto out;
+	}
+
+	platform_set_drvdata(pdev, &snd_soc_at91sam9x5ek);
+
+	dev_dbg(&pdev->dev, "ASoC: %s ok\n", __func__);
+
+	return ret;
+
+out:
+	atmel_ssc_put_audio(0);
+	return ret;
+}
+
+static int sam9x5_wm8731_driver_remove(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = platform_get_drvdata(pdev);
+
+	snd_soc_unregister_card(card);
+	atmel_ssc_put_audio(0);
+
+	return 0;
+}
+
+static const struct of_device_id sam9x5_wm8731_of_match[] = {
+	{ .compatible = "atmel,sam9x5-audio-wm8731", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sam9x5_wm8731_of_match);
+
+static struct platform_driver sam9x5_wm8731_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(sam9x5_wm8731_of_match),
+	},
+	.probe = sam9x5_wm8731_driver_probe,
+	.remove = sam9x5_wm8731_driver_remove,
+};
+module_platform_driver(sam9x5_wm8731_driver);
+
+/* Module information */
+MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
+MODULE_AUTHOR("Richard Genoud <richard.genoud@gmail.com>");
+MODULE_DESCRIPTION("ALSA SoC machine driver for AT91SAM9x5 - WM8731");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
-- 
1.7.10.4

  reply	other threads:[~2013-07-08 13:29 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-08 13:29 [PATCH v2 0/5] Sound support for at91sam9x5-wm8731 based boards Richard Genoud
2013-07-08 13:29 ` Richard Genoud [this message]
2013-07-08 14:39   ` [alsa-devel] [PATCH v2 1/5] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards Lars-Peter Clausen
2013-07-09  7:37     ` Richard Genoud
2013-07-08 15:07   ` Mark Brown
2013-07-09  8:19     ` Richard Genoud
2013-07-09  8:37       ` Bo Shen
2013-07-09  9:29       ` Mark Brown
2013-07-09 10:27         ` Richard Genoud
2013-07-08 13:29 ` [PATCH v2 2/5] ARM: AT91: DTS: sam9x5: add SSC DMA parameters Richard Genoud
2013-07-08 15:07   ` Mark Brown
2013-07-09  8:27     ` Richard Genoud
2013-07-09  9:32       ` Mark Brown
2013-07-09  9:46         ` Richard Genoud
2013-07-08 13:29 ` [PATCH v2 3/5] ARM: AT91: DTS: sam9x5ek: add WM8731 codec Richard Genoud
2013-07-08 14:36   ` [alsa-devel] " Mark Brown
2013-07-08 13:29 ` [PATCH v2 4/5] ARM: AT91: DTS: sam9x5ek: add sound configuration Richard Genoud
2013-07-08 13:29 ` [PATCH v2 5/5] ARM: AT91: DTS: sam9x5ek: enable SSC Richard Genoud
2013-07-08 13:53 ` [PATCH v2 0/5] Sound support for at91sam9x5-wm8731 based boards Nicolas Ferre
2013-07-09 12:28 ` [PATCH v3 0/7] " Richard Genoud
2013-07-09 12:28   ` [PATCH v3 1/7] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards Richard Genoud
2013-07-09 12:28   ` [PATCH v3 2/7] Documentation: DT: add sam9x5ek-wm8731 machine driver Richard Genoud
2013-07-09 12:28   ` [PATCH v3 3/7] Documentation: DT: update atmel SSC with DMA binding Richard Genoud
2013-07-09 13:19     ` Richard Genoud
2013-07-09 13:20       ` Nicolas Ferre
2013-07-09 13:31         ` Richard Genoud
2013-07-09 12:28   ` [PATCH v3 4/7] ARM: AT91: DTS: sam9x5: add SSC DMA parameters Richard Genoud
2013-07-09 12:28   ` [PATCH v3 5/7] ARM: AT91: DTS: sam9x5ek: add WM8731 codec Richard Genoud
2013-07-09 12:28   ` [PATCH v3 6/7] ARM: AT91: DTS: sam9x5ek: add sound configuration Richard Genoud
2013-07-09 12:28   ` [PATCH v3 7/7] ARM: AT91: DTS: sam9x5ek: enable SSC Richard Genoud
2013-07-09 14:25   ` [PATCH v4 0/7] Sound support for at91sam9x5-wm8731 based boards Richard Genoud
2013-07-09 14:25     ` [PATCH v4 1/7] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards Richard Genoud
2013-07-09 14:59       ` Mark Brown
2013-07-10  9:25         ` Richard Genoud
2013-07-10 10:00           ` Mark Brown
2013-07-10  6:11       ` Bo Shen
2013-07-10  9:30         ` Richard Genoud
2013-07-09 14:25     ` [PATCH v4 2/7] Documentation: DT: add sam9x5ek-wm8731 machine driver Richard Genoud
2013-07-09 15:01       ` Mark Brown
2013-07-10  9:32         ` Richard Genoud
2013-07-09 14:25     ` [PATCH v4 3/7] Documentation: DT: update atmel SSC with DMA binding Richard Genoud
2013-07-09 15:05       ` Mark Brown
2013-07-10  9:48         ` Richard Genoud
2013-07-10 10:01           ` Mark Brown
2013-07-09 14:25     ` [PATCH v4 4/7] ARM: AT91: DTS: sam9x5: add SSC DMA parameters Richard Genoud
2013-07-09 14:25     ` [PATCH v4 5/7] ARM: AT91: DTS: sam9x5ek: add WM8731 codec Richard Genoud
2013-07-09 14:25     ` [PATCH v4 6/7] ARM: AT91: DTS: sam9x5ek: add sound configuration Richard Genoud
2013-07-09 14:25     ` [PATCH v4 7/7] ARM: AT91: DTS: sam9x5ek: enable SSC Richard Genoud
2013-07-09 14:42     ` [PATCH v4 0/7] Sound support for at91sam9x5-wm8731 based boards Mark Brown
2013-07-09 14:52       ` Richard Genoud

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1373290193-25300-2-git-send-email-richard.genoud@gmail.com \
    --to=richard.genoud@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).