linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: richard.genoud@gmail.com (Richard Genoud)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 6/7] ARM: AT91: DTS: sam9x5ek: add sound configuration
Date: Tue,  9 Jul 2013 14:28:48 +0200	[thread overview]
Message-ID: <1373372929-17800-7-git-send-email-richard.genoud@gmail.com> (raw)
In-Reply-To: <1373372929-17800-1-git-send-email-richard.genoud@gmail.com>

The sam9x5ek board has 2 jacks:
headphone wired on RHPOUT/LHPOUT of the wm8731
line in wired on LLINEIN/RLINEIN of the wm8731

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
---
 arch/arm/boot/dts/at91sam9x5ek.dtsi |   18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index e6fb309..2bf51cc 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -109,4 +109,22 @@
 			status = "okay";
 		};
 	};
+
+	sound {
+		compatible = "atmel,sam9x5-wm8731-audio";
+
+		atmel,model = "wm8731 @ AT91SAM9X5EK";
+
+		atmel,audio-routing =
+			"Headphone Jack", "RHPOUT",
+			"Headphone Jack", "LHPOUT",
+			"LLINEIN", "Line In Jack",
+			"RLINEIN", "Line In Jack";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8731>;
+		atmel,format = "i2s";
+		atmel,bitclock-master;
+		atmel,frame-master;
+	};
 };
-- 
1.7.10.4

  parent reply	other threads:[~2013-07-09 12:28 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-08 13:29 [PATCH v2 0/5] Sound support for at91sam9x5-wm8731 based boards Richard Genoud
2013-07-08 13:29 ` [PATCH v2 1/5] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards Richard Genoud
2013-07-08 14:39   ` [alsa-devel] " Lars-Peter Clausen
2013-07-09  7:37     ` Richard Genoud
2013-07-08 15:07   ` Mark Brown
2013-07-09  8:19     ` Richard Genoud
2013-07-09  8:37       ` Bo Shen
2013-07-09  9:29       ` Mark Brown
2013-07-09 10:27         ` Richard Genoud
2013-07-08 13:29 ` [PATCH v2 2/5] ARM: AT91: DTS: sam9x5: add SSC DMA parameters Richard Genoud
2013-07-08 15:07   ` Mark Brown
2013-07-09  8:27     ` Richard Genoud
2013-07-09  9:32       ` Mark Brown
2013-07-09  9:46         ` Richard Genoud
2013-07-08 13:29 ` [PATCH v2 3/5] ARM: AT91: DTS: sam9x5ek: add WM8731 codec Richard Genoud
2013-07-08 14:36   ` [alsa-devel] " Mark Brown
2013-07-08 13:29 ` [PATCH v2 4/5] ARM: AT91: DTS: sam9x5ek: add sound configuration Richard Genoud
2013-07-08 13:29 ` [PATCH v2 5/5] ARM: AT91: DTS: sam9x5ek: enable SSC Richard Genoud
2013-07-08 13:53 ` [PATCH v2 0/5] Sound support for at91sam9x5-wm8731 based boards Nicolas Ferre
2013-07-09 12:28 ` [PATCH v3 0/7] " Richard Genoud
2013-07-09 12:28   ` [PATCH v3 1/7] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards Richard Genoud
2013-07-09 12:28   ` [PATCH v3 2/7] Documentation: DT: add sam9x5ek-wm8731 machine driver Richard Genoud
2013-07-09 12:28   ` [PATCH v3 3/7] Documentation: DT: update atmel SSC with DMA binding Richard Genoud
2013-07-09 13:19     ` Richard Genoud
2013-07-09 13:20       ` Nicolas Ferre
2013-07-09 13:31         ` Richard Genoud
2013-07-09 12:28   ` [PATCH v3 4/7] ARM: AT91: DTS: sam9x5: add SSC DMA parameters Richard Genoud
2013-07-09 12:28   ` [PATCH v3 5/7] ARM: AT91: DTS: sam9x5ek: add WM8731 codec Richard Genoud
2013-07-09 12:28   ` Richard Genoud [this message]
2013-07-09 12:28   ` [PATCH v3 7/7] ARM: AT91: DTS: sam9x5ek: enable SSC Richard Genoud
2013-07-09 14:25   ` [PATCH v4 0/7] Sound support for at91sam9x5-wm8731 based boards Richard Genoud
2013-07-09 14:25     ` [PATCH v4 1/7] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards Richard Genoud
2013-07-09 14:59       ` Mark Brown
2013-07-10  9:25         ` Richard Genoud
2013-07-10 10:00           ` Mark Brown
2013-07-10  6:11       ` Bo Shen
2013-07-10  9:30         ` Richard Genoud
2013-07-09 14:25     ` [PATCH v4 2/7] Documentation: DT: add sam9x5ek-wm8731 machine driver Richard Genoud
2013-07-09 15:01       ` Mark Brown
2013-07-10  9:32         ` Richard Genoud
2013-07-09 14:25     ` [PATCH v4 3/7] Documentation: DT: update atmel SSC with DMA binding Richard Genoud
2013-07-09 15:05       ` Mark Brown
2013-07-10  9:48         ` Richard Genoud
2013-07-10 10:01           ` Mark Brown
2013-07-09 14:25     ` [PATCH v4 4/7] ARM: AT91: DTS: sam9x5: add SSC DMA parameters Richard Genoud
2013-07-09 14:25     ` [PATCH v4 5/7] ARM: AT91: DTS: sam9x5ek: add WM8731 codec Richard Genoud
2013-07-09 14:25     ` [PATCH v4 6/7] ARM: AT91: DTS: sam9x5ek: add sound configuration Richard Genoud
2013-07-09 14:25     ` [PATCH v4 7/7] ARM: AT91: DTS: sam9x5ek: enable SSC Richard Genoud
2013-07-09 14:42     ` [PATCH v4 0/7] Sound support for at91sam9x5-wm8731 based boards Mark Brown
2013-07-09 14:52       ` Richard Genoud

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1373372929-17800-7-git-send-email-richard.genoud@gmail.com \
    --to=richard.genoud@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).