From: peter.chen@freescale.com (Peter Chen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v12 08/13] usb: chipidea: move otg relate things to otg file
Date: Thu, 11 Jul 2013 14:27:16 +0800 [thread overview]
Message-ID: <1373524041-10482-9-git-send-email-peter.chen@freescale.com> (raw)
In-Reply-To: <1373524041-10482-1-git-send-email-peter.chen@freescale.com>
Move otg relate things to otg file.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
drivers/usb/chipidea/core.c | 63 +++++++++----------------------------------
drivers/usb/chipidea/otg.c | 57 +++++++++++++++++++++++++++++++++++++-
drivers/usb/chipidea/otg.h | 2 +
3 files changed, 70 insertions(+), 52 deletions(-)
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index f701e3b..0197da2 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -295,40 +295,6 @@ int hw_device_reset(struct ci_hdrc *ci, u32 mode)
return 0;
}
-/**
- * ci_otg_role - pick role based on ID pin state
- * @ci: the controller
- */
-static enum ci_role ci_otg_role(struct ci_hdrc *ci)
-{
- u32 sts = hw_read(ci, OP_OTGSC, ~0);
- enum ci_role role = sts & OTGSC_ID
- ? CI_ROLE_GADGET
- : CI_ROLE_HOST;
-
- return role;
-}
-
-/**
- * ci_role_work - perform role changing based on ID pin
- * @work: work struct
- */
-static void ci_role_work(struct work_struct *work)
-{
- struct ci_hdrc *ci = container_of(work, struct ci_hdrc, work);
- enum ci_role role = ci_otg_role(ci);
-
- if (role != ci->role) {
- dev_dbg(ci->dev, "switching from %s to %s\n",
- ci_role(ci)->name, ci->roles[role]->name);
-
- ci_role_stop(ci);
- ci_role_start(ci, role);
- }
-
- enable_irq(ci->irq);
-}
-
static irqreturn_t ci_irq(int irq, void *data)
{
struct ci_hdrc *ci = data;
@@ -409,6 +375,8 @@ static inline void ci_role_destroy(struct ci_hdrc *ci)
{
ci_hdrc_gadget_destroy(ci);
ci_hdrc_host_destroy(ci);
+ if (ci->is_otg)
+ ci_hdrc_otg_destory(ci);
}
static void ci_get_otg_capable(struct ci_hdrc *ci)
@@ -475,13 +443,6 @@ static int ci_hdrc_probe(struct platform_device *pdev)
return -ENODEV;
}
- INIT_WORK(&ci->work, ci_role_work);
- ci->wq = create_singlethread_workqueue("ci_otg");
- if (!ci->wq) {
- dev_err(dev, "can't create workqueue\n");
- return -ENODEV;
- }
-
/* To know if controller is OTG capable or not */
ci_get_otg_capable(ci);
@@ -510,8 +471,15 @@ static int ci_hdrc_probe(struct platform_device *pdev)
if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
dev_err(dev, "no supported roles\n");
- ret = -ENODEV;
- goto rm_wq;
+ return -ENODEV;
+ }
+
+ if (ci->is_otg) {
+ ret = ci_hdrc_otg_init(ci);
+ if (ret) {
+ dev_err(dev, "init otg fails, ret = %d\n", ret);
+ goto stop;
+ }
}
if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) {
@@ -519,7 +487,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
/* ID pin needs 1ms debouce time, we delay 2ms for safe */
mdelay(2);
ci->role = ci_otg_role(ci);
- ci_hdrc_otg_init(ci);
+ ci_enable_otg_interrupt(ci, OTGSC_IDIE);
} else {
/*
* If the controller is not OTG capable, but support
@@ -538,7 +506,7 @@ static int ci_hdrc_probe(struct platform_device *pdev)
if (ret) {
dev_err(dev, "can't start %s role\n", ci_role(ci)->name);
ret = -ENODEV;
- goto rm_wq;
+ goto stop;
}
platform_set_drvdata(pdev, ci);
@@ -554,9 +522,6 @@ static int ci_hdrc_probe(struct platform_device *pdev)
free_irq(ci->irq, ci);
stop:
ci_role_destroy(ci);
-rm_wq:
- flush_workqueue(ci->wq);
- destroy_workqueue(ci->wq);
return ret;
}
@@ -566,8 +531,6 @@ static int ci_hdrc_remove(struct platform_device *pdev)
struct ci_hdrc *ci = platform_get_drvdata(pdev);
dbg_remove_files(ci);
- flush_workqueue(ci->wq);
- destroy_workqueue(ci->wq);
free_irq(ci->irq, ci);
ci_role_destroy(ci);
diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
index abefb4d..68f2faf 100644
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
@@ -39,12 +39,65 @@ void ci_disable_otg_interrupt(struct ci_hdrc *ci, u32 bits)
}
/**
- * ci_hdrc_otg_init - initialize otgsc bits
+ * ci_otg_role - pick role based on ID pin state
+ * @ci: the controller
+ */
+enum ci_role ci_otg_role(struct ci_hdrc *ci)
+{
+ u32 sts = hw_read(ci, OP_OTGSC, ~0);
+ enum ci_role role = sts & OTGSC_ID
+ ? CI_ROLE_GADGET
+ : CI_ROLE_HOST;
+
+ return role;
+}
+
+/**
+ * ci_role_work - perform role changing based on ID pin
+ * @work: work struct
+ */
+static void ci_role_work(struct work_struct *work)
+{
+ struct ci_hdrc *ci = container_of(work, struct ci_hdrc, work);
+ enum ci_role role = ci_otg_role(ci);
+
+ if (role != ci->role) {
+ dev_dbg(ci->dev, "switching from %s to %s\n",
+ ci_role(ci)->name, ci->roles[role]->name);
+
+ ci_role_stop(ci);
+ ci_role_start(ci, role);
+ }
+
+ enable_irq(ci->irq);
+}
+
+/**
+ * ci_hdrc_otg_init - initialize otg struct
* ci: the controller
*/
int ci_hdrc_otg_init(struct ci_hdrc *ci)
{
- ci_enable_otg_interrupt(ci, OTGSC_IDIE);
+ INIT_WORK(&ci->work, ci_role_work);
+ ci->wq = create_singlethread_workqueue("ci_otg");
+ if (!ci->wq) {
+ dev_err(ci->dev, "can't create workqueue\n");
+ return -ENODEV;
+ }
return 0;
}
+
+/**
+ * ci_hdrc_otg_destroy - destory otg struct
+ * ci: the controller
+ */
+void ci_hdrc_otg_destory(struct ci_hdrc *ci)
+{
+ if (ci->wq) {
+ flush_workqueue(ci->wq);
+ destroy_workqueue(ci->wq);
+ }
+ ci_disable_otg_interrupt(ci, OTGSC_INT_EN_BITS);
+ ci_clear_otg_interrupt(ci, OTGSC_INT_STATUS_BITS);
+}
diff --git a/drivers/usb/chipidea/otg.h b/drivers/usb/chipidea/otg.h
index f24ec37..8913062 100644
--- a/drivers/usb/chipidea/otg.h
+++ b/drivers/usb/chipidea/otg.h
@@ -15,5 +15,7 @@ int ci_hdrc_otg_init(struct ci_hdrc *ci);
void ci_clear_otg_interrupt(struct ci_hdrc *ci, u32 bits);
void ci_enable_otg_interrupt(struct ci_hdrc *ci, u32 bits);
void ci_disable_otg_interrupt(struct ci_hdrc *ci, u32 bits);
+void ci_hdrc_otg_destory(struct ci_hdrc *ci);
+enum ci_role ci_otg_role(struct ci_hdrc *ci);
#endif /* __DRIVERS_USB_CHIPIDEA_OTG_H */
--
1.7.0.4
next prev parent reply other threads:[~2013-07-11 6:27 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-11 6:27 [PATCH v12 00/13] Add tested id switch and vbus connect detect support for Chipidea Peter Chen
2013-07-11 6:27 ` [PATCH v12 01/13] usb: chipidea: add vbus regulator control Peter Chen
2013-07-11 6:27 ` [PATCH v12 02/13] usb: chipidea: imx: remove vbus regulator operation Peter Chen
2013-07-11 6:37 ` Sascha Hauer
2013-07-11 6:55 ` Peter Chen
2013-07-11 6:27 ` [PATCH v12 03/13] usb: chipidea: udc: otg_set_peripheral is useless for some chipidea users Peter Chen
2013-07-11 6:27 ` [PATCH v12 04/13] usb: chipidea: otg: Add otg file used to access otgsc Peter Chen
2013-07-11 6:27 ` [PATCH v12 05/13] usb: chipidea: Add role init and destory APIs Peter Chen
2013-07-11 6:27 ` [PATCH v12 06/13] usb: chipidea: add otg_cap attribute for otg capable Peter Chen
2013-07-11 15:36 ` Marek Vasut
2013-07-12 2:58 ` Peter Chen
2013-07-12 3:54 ` Marek Vasut
2013-07-12 8:12 ` Alexander Shishkin
2013-07-12 8:25 ` Peter Chen
2013-07-12 9:42 ` Alexander Shishkin
2013-07-12 10:16 ` Peter Chen
2013-07-16 9:45 ` Peter Chen
2013-07-11 6:27 ` [PATCH v12 07/13] usb: chipidea: disable all interrupts and clear all interrupts status Peter Chen
2013-07-11 6:27 ` Peter Chen [this message]
2013-07-11 6:27 ` [PATCH v12 09/13] usb: chipidea: add vbus interrupt handler Peter Chen
2013-07-11 6:27 ` [PATCH v12 10/13] usb: chipidea: add wait vbus lower than OTGSC_BSV before role starts Peter Chen
2013-07-11 7:24 ` Marc Kleine-Budde
2013-07-11 9:25 ` Peter Chen
2013-07-11 9:31 ` Marc Kleine-Budde
2013-07-11 6:27 ` [PATCH v12 11/13] usb: chipidea: udc: misuse flag CI_HDRC_REGS_SHARED and CI_HDRC_PULLUP_ON_VBUS Peter Chen
2013-07-11 6:27 ` [PATCH v12 12/13] usb: chipidea: udc: .pullup is valid when vbus is on at CI_HDRC_PULLUP_ON_VBUS Peter Chen
2013-07-11 6:27 ` [PATCH v12 13/13] usb: chipidea: udc: fix the oops when plugs in usb cable after rmmod gadget Peter Chen
2013-07-11 17:57 ` [PATCH v12 00/13] Add tested id switch and vbus connect detect support for Chipidea Marek Vasut
2013-07-12 3:12 ` Peter Chen
2013-07-12 4:04 ` Marek Vasut
2013-07-12 8:26 ` Peter Chen
2013-07-12 13:18 ` Marek Vasut
2013-07-13 0:36 ` Chen Peter-B29397
2013-07-16 9:43 ` Peter Chen
2013-07-22 1:15 ` Marek Vasut
2013-07-22 1:21 ` Peter Chen
2013-07-22 1:40 ` Marek Vasut
2013-07-22 1:53 ` Peter Chen
2013-07-25 5:55 ` Marek Vasut
2013-07-25 5:58 ` Peter Chen
2013-07-25 12:36 ` Marek Vasut
2013-07-19 14:11 ` Fabio Estevam
2013-07-25 6:05 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1373524041-10482-9-git-send-email-peter.chen@freescale.com \
--to=peter.chen@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).