From mboxrd@z Thu Jan 1 00:00:00 1970 From: zonque@gmail.com (Daniel Mack) Date: Thu, 11 Jul 2013 17:17:55 +0200 Subject: [PATCH 3/5] gpio: pxa: Documentation: provide example bindings for PXA3xx In-Reply-To: <1373555877-29887-1-git-send-email-zonque@gmail.com> References: <1373555877-29887-1-git-send-email-zonque@gmail.com> Message-ID: <1373555877-29887-4-git-send-email-zonque@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add another example to describe bindings that work for PXA3xx boards. Signed-off-by: Daniel Mack --- Documentation/devicetree/bindings/gpio/mrvl-gpio.txt | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt index 6641626..b2afdb2 100644 --- a/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt @@ -19,7 +19,7 @@ Required properties: - gpio-controller : Marks the device node as a gpio controller. - #gpio-cells : Should be one. It is the pin number. -Example: +Example for a MMP platform: gpio: gpio at d4019000 { compatible = "marvell,mmp-gpio"; @@ -32,6 +32,19 @@ Example: #interrupt-cells = <1>; }; +Example for a PXA3xx platform: + + gpio: gpio at 40e00000 { + compatible = "intel,pxa3xx-gpio"; + reg = <0x40e00000 0x10000>; + interrupt-names = "gpio0", "gpio1", "gpio_mux"; + interrupts = <8 9 10>; + gpio-controller; + #gpio-cells = <0x2>; + interrupt-controller; + #interrupt-cells = <0x2>; + }; + * Marvell Orion GPIO Controller Required properties: -- 1.8.1.4