* [PATCH 0/2] Support for another NSA310
@ 2013-07-17 16:51 Andrew Lunn
2013-07-17 16:51 ` [PATCH 1/2] ARM: Kirkwood: Add support for another ZyXEL NSA310 variant Andrew Lunn
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Andrew Lunn @ 2013-07-17 16:51 UTC (permalink / raw)
To: linux-arm-kernel
There are apparently three different designs of the ZyXEL NSA310 NAS
box. This patchset adds support for a second one, refactoring the
common DTS parts into a shared DTSI file.
What is not clear is naming. There is no obvious marketing name
difference, hardware version label, etc. So for the same of argument,
this new device uses the name NSA310a in DTS.
The second patch adds to the kirkwood_defconfig drivers not already in
the default configuration, plus some additional drivers used by other
kirkwood devices. The aim is to improve build test coverage.
Andrew
Andrew Lunn (2):
ARM: Kirkwood: Add support for another ZyXEL NSA210 variant
ARM: Kirkwood: update defconfig for used i2c devices, EXT4 FS, r8169
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/kirkwood-nsa310-common.dtsi | 107 ++++++++++++++++
arch/arm/boot/dts/kirkwood-nsa310.dts | 100 +--------------
arch/arm/boot/dts/kirkwood-nsa310a.dts | 165 +++++++++++++++++++++++++
arch/arm/configs/kirkwood_defconfig | 10 +-
5 files changed, 283 insertions(+), 100 deletions(-)
create mode 100644 arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
create mode 100644 arch/arm/boot/dts/kirkwood-nsa310a.dts
--
1.7.10.4
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 1/2] ARM: Kirkwood: Add support for another ZyXEL NSA310 variant
2013-07-17 16:51 [PATCH 0/2] Support for another NSA310 Andrew Lunn
@ 2013-07-17 16:51 ` Andrew Lunn
2013-07-25 20:04 ` Jason Cooper
2013-07-17 16:51 ` [PATCH 2/2] ARM: Kirkwood: update defconfig for used i2c devices, EXT4 FS, r8169 Andrew Lunn
2013-08-08 13:53 ` [PATCH 0/2] Support for another NSA310 Andrew Lunn
2 siblings, 1 reply; 7+ messages in thread
From: Andrew Lunn @ 2013-07-17 16:51 UTC (permalink / raw)
To: linux-arm-kernel
There are a number of variants of the ZyXEL NSA310, with slightly
different LEDs, buttons and i2c devices. Add a DTS file to support one
more of these variants.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/kirkwood-nsa310-common.dtsi | 107 ++++++++++++++++
arch/arm/boot/dts/kirkwood-nsa310.dts | 100 +--------------
arch/arm/boot/dts/kirkwood-nsa310a.dts | 165 +++++++++++++++++++++++++
4 files changed, 274 insertions(+), 99 deletions(-)
create mode 100644 arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
create mode 100644 arch/arm/boot/dts/kirkwood-nsa310a.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 641b3c9..d2ffa39 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -89,6 +89,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
kirkwood-ns2max.dtb \
kirkwood-ns2mini.dtb \
kirkwood-nsa310.dtb \
+ kirkwood-nsa310a.dtb \
kirkwood-sheevaplug.dtb \
kirkwood-sheevaplug-esata.dtb \
kirkwood-topkick.dtb \
diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
new file mode 100644
index 0000000..8f739c8
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
@@ -0,0 +1,107 @@
+/include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
+
+/ {
+ model = "ZyXEL NSA310";
+
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+
+ pmx_usb_power_off: pmx-usb-power-off {
+ marvell,pins = "mpp21";
+ marvell,function = "gpio";
+ };
+ pmx_pwr_off: pmx-pwr-off {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+
+ };
+
+ serial at 12000 {
+ status = "ok";
+ };
+
+ sata at 80000 {
+ status = "okay";
+ nr-ports = <2>;
+ };
+
+ nand at 3000000 {
+ status = "okay";
+ chip-delay = <35>;
+
+ partition at 0 {
+ label = "uboot";
+ reg = <0x0000000 0x0100000>;
+ read-only;
+ };
+ partition at 100000 {
+ label = "uboot_env";
+ reg = <0x0100000 0x0080000>;
+ };
+ partition at 180000 {
+ label = "key_store";
+ reg = <0x0180000 0x0080000>;
+ };
+ partition at 200000 {
+ label = "info";
+ reg = <0x0200000 0x0080000>;
+ };
+ partition at 280000 {
+ label = "etc";
+ reg = <0x0280000 0x0a00000>;
+ };
+ partition at c80000 {
+ label = "kernel_1";
+ reg = <0x0c80000 0x0a00000>;
+ };
+ partition at 1680000 {
+ label = "rootfs1";
+ reg = <0x1680000 0x2fc0000>;
+ };
+ partition at 4640000 {
+ label = "kernel_2";
+ reg = <0x4640000 0x0a00000>;
+ };
+ partition at 5040000 {
+ label = "rootfs2";
+ reg = <0x5040000 0x2fc0000>;
+ };
+ };
+
+ pcie-controller {
+ status = "okay";
+
+ pcie at 1,0 {
+ status = "okay";
+ };
+ };
+ };
+
+ gpio_poweroff {
+ compatible = "gpio-poweroff";
+ pinctrl-0 = <&pmx_pwr_off>;
+ pinctrl-names = "default";
+ gpios = <&gpio1 16 0>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_usb_power_off>;
+ pinctrl-names = "default";
+
+ usb0_power_off: regulator at 1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB Power Off";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio0 21 0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
index 6900359..62fb0a9 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
@@ -1,10 +1,8 @@
/dts-v1/;
-/include/ "kirkwood.dtsi"
-/include/ "kirkwood-6281.dtsi"
+/include/ "kirkwood-nsa310-common.dtsi"
/ {
- model = "ZyXEL NSA310";
compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
@@ -41,11 +39,6 @@
marvell,function = "gpio";
};
- pmx_usb_power_off: pmx-usb-power-off {
- marvell,pins = "mpp21";
- marvell,function = "gpio";
- };
-
pmx_led_sys_green: pmx-led-sys-green {
marvell,pins = "mpp28";
marvell,function = "gpio";
@@ -95,20 +88,6 @@
marvell,pins = "mpp46";
marvell,function = "gpio";
};
-
- pmx_pwr_off: pmx-pwr-off {
- marvell,pins = "mpp48";
- marvell,function = "gpio";
- };
- };
-
- serial at 12000 {
- status = "ok";
- };
-
- sata at 80000 {
- status = "okay";
- nr-ports = <2>;
};
i2c at 11000 {
@@ -119,57 +98,6 @@
reg = <0x2e>;
};
};
-
- nand at 3000000 {
- status = "okay";
- chip-delay = <35>;
-
- partition at 0 {
- label = "uboot";
- reg = <0x0000000 0x0100000>;
- read-only;
- };
- partition at 100000 {
- label = "uboot_env";
- reg = <0x0100000 0x0080000>;
- };
- partition at 180000 {
- label = "key_store";
- reg = <0x0180000 0x0080000>;
- };
- partition at 200000 {
- label = "info";
- reg = <0x0200000 0x0080000>;
- };
- partition at 280000 {
- label = "etc";
- reg = <0x0280000 0x0a00000>;
- };
- partition at c80000 {
- label = "kernel_1";
- reg = <0x0c80000 0x0a00000>;
- };
- partition at 1680000 {
- label = "rootfs1";
- reg = <0x1680000 0x2fc0000>;
- };
- partition at 4640000 {
- label = "kernel_2";
- reg = <0x4640000 0x0a00000>;
- };
- partition at 5040000 {
- label = "rootfs2";
- reg = <0x5040000 0x2fc0000>;
- };
- };
-
- pcie-controller {
- status = "okay";
-
- pcie at 1,0 {
- status = "okay";
- };
- };
};
gpio_keys {
@@ -246,30 +174,4 @@
gpios = <&gpio1 8 0>;
};
};
-
- gpio_poweroff {
- compatible = "gpio-poweroff";
- pinctrl-0 = <&pmx_pwr_off>;
- pinctrl-names = "default";
- gpios = <&gpio1 16 0>;
- };
-
- regulators {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&pmx_usb_power_off>;
- pinctrl-names = "default";
-
- usb0_power_off: regulator at 1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "USB Power Off";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- regulator-boot-on;
- gpio = <&gpio0 21 0>;
- };
- };
};
diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts
new file mode 100644
index 0000000..1070e9d
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts
@@ -0,0 +1,165 @@
+/dts-v1/;
+
+/include/ "kirkwood-nsa310-common.dtsi"
+
+/*
+ * There are at least two different NSA310 designs. This variant does
+ * not have the red USB Led.
+ */
+
+/ {
+ compatible = "zyxel,nsa310a", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ ocp at f1000000 {
+ pinctrl: pinctrl at 10000 {
+ pinctrl-names = "default";
+
+ pmx_led_esata_green: pmx-led-esata-green {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_esata_red: pmx-led-esata-red {
+ marvell,pins = "mpp13";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_usb_green: pmx-led-usb-green {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+
+ pmx_usb_power_off: pmx-usb-power-off {
+ marvell,pins = "mpp21";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_sys_green: pmx-led-sys-green {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_sys_red: pmx-led-sys-red {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ pmx_btn_reset: pmx-btn-reset {
+ marvell,pins = "mpp36";
+ marvell,function = "gpio";
+ };
+
+ pmx_btn_copy: pmx-btn-copy {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_copy_green: pmx-led-copy-green {
+ marvell,pins = "mpp39";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_copy_red: pmx-led-copy-red {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd_green: pmx-led-hdd-green {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_hdd_red: pmx-led-hdd-red {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+
+ pmx_btn_power: pmx-btn-power {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+
+ };
+
+ i2c at 11000 {
+ status = "okay";
+
+ lm85: lm85 at 2e {
+ compatible = "lm85";
+ reg = <0x2e>;
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ button at 1 {
+ label = "Power Button";
+ linux,code = <116>;
+ gpios = <&gpio1 14 0>;
+ };
+ button at 2 {
+ label = "Copy Button";
+ linux,code = <133>;
+ gpios = <&gpio1 5 1>;
+ };
+ button at 3 {
+ label = "Reset Button";
+ linux,code = <0x198>;
+ gpios = <&gpio1 4 1>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ green-sys {
+ label = "nsa310:green:sys";
+ gpios = <&gpio0 28 0>;
+ };
+ red-sys {
+ label = "nsa310:red:sys";
+ gpios = <&gpio0 29 0>;
+ };
+ green-hdd {
+ label = "nsa310:green:hdd";
+ gpios = <&gpio1 9 0>;
+ };
+ red-hdd {
+ label = "nsa310:red:hdd";
+ gpios = <&gpio1 10 0>;
+ };
+ green-esata {
+ label = "nsa310:green:esata";
+ gpios = <&gpio0 12 0>;
+ };
+ red-esata {
+ label = "nsa310:red:esata";
+ gpios = <&gpio0 13 0>;
+ };
+ green-usb {
+ label = "nsa310:green:usb";
+ gpios = <&gpio0 15 0>;
+ };
+ green-copy {
+ label = "nsa310:green:copy";
+ gpios = <&gpio1 7 0>;
+ };
+ red-copy {
+ label = "nsa310:red:copy";
+ gpios = <&gpio1 8 0>;
+ };
+ };
+};
--
1.7.10.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 2/2] ARM: Kirkwood: update defconfig for used i2c devices, EXT4 FS, r8169
2013-07-17 16:51 [PATCH 0/2] Support for another NSA310 Andrew Lunn
2013-07-17 16:51 ` [PATCH 1/2] ARM: Kirkwood: Add support for another ZyXEL NSA310 variant Andrew Lunn
@ 2013-07-17 16:51 ` Andrew Lunn
2013-07-25 20:09 ` Jason Cooper
2013-08-08 13:53 ` [PATCH 0/2] Support for another NSA310 Andrew Lunn
2 siblings, 1 reply; 7+ messages in thread
From: Andrew Lunn @ 2013-07-17 16:51 UTC (permalink / raw)
To: linux-arm-kernel
Various kirkwood boards make use of i2c devices. Ensure the defconfig
builds them. Also, EXT4 FS is also common on NAS boxes, so include it
as well. And lastly, NSA310 has a RealTek 8169 onboard.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
arch/arm/configs/kirkwood_defconfig | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index 0f2aa61..4f2bf73 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -92,6 +92,7 @@ CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ORION=y
CONFIG_BLK_DEV_LOOP=y
+CONFIG_EEPROM_AT24=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=m
@@ -103,6 +104,7 @@ CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_DSA_MV88E6123_61_65=y
CONFIG_MV643XX_ETH=y
+CONFIG_R8169=y
CONFIG_MARVELL_PHY=y
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_SDIO=y
@@ -123,7 +125,10 @@ CONFIG_I2C_MV64XXX=y
CONFIG_SPI=y
CONFIG_SPI_ORION=y
CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
+CONFIG_SENSORS_ADT7475=y
+CONFIG_SENSORS_LM63=y
+CONFIG_SENSORS_LM75=y
+CONFIG_SENSORS_LM85=y
CONFIG_THERMAL=y
CONFIG_KIRKWOOD_THERMAL=y
CONFIG_WATCHDOG=y
@@ -164,6 +169,8 @@ CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RS5C372=y
+CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_RTC_DRV_MV=y
CONFIG_DMADEVICES=y
@@ -171,6 +178,7 @@ CONFIG_MV_XOR=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=y
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_UDF_FS=m
--
1.7.10.4
^ permalink raw reply related [flat|nested] 7+ messages in thread
* [PATCH 1/2] ARM: Kirkwood: Add support for another ZyXEL NSA310 variant
2013-07-17 16:51 ` [PATCH 1/2] ARM: Kirkwood: Add support for another ZyXEL NSA310 variant Andrew Lunn
@ 2013-07-25 20:04 ` Jason Cooper
0 siblings, 0 replies; 7+ messages in thread
From: Jason Cooper @ 2013-07-25 20:04 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jul 17, 2013 at 06:51:49PM +0200, Andrew Lunn wrote:
> There are a number of variants of the ZyXEL NSA310, with slightly
> different LEDs, buttons and i2c devices. Add a DTS file to support one
> more of these variants.
>
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/kirkwood-nsa310-common.dtsi | 107 ++++++++++++++++
> arch/arm/boot/dts/kirkwood-nsa310.dts | 100 +--------------
> arch/arm/boot/dts/kirkwood-nsa310a.dts | 165 +++++++++++++++++++++++++
> 4 files changed, 274 insertions(+), 99 deletions(-)
> create mode 100644 arch/arm/boot/dts/kirkwood-nsa310-common.dtsi
> create mode 100644 arch/arm/boot/dts/kirkwood-nsa310a.dts
Applied to mvebu/dt
thx,
Jason.
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 2/2] ARM: Kirkwood: update defconfig for used i2c devices, EXT4 FS, r8169
2013-07-17 16:51 ` [PATCH 2/2] ARM: Kirkwood: update defconfig for used i2c devices, EXT4 FS, r8169 Andrew Lunn
@ 2013-07-25 20:09 ` Jason Cooper
0 siblings, 0 replies; 7+ messages in thread
From: Jason Cooper @ 2013-07-25 20:09 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jul 17, 2013 at 06:51:50PM +0200, Andrew Lunn wrote:
> Various kirkwood boards make use of i2c devices. Ensure the defconfig
> builds them. Also, EXT4 FS is also common on NAS boxes, so include it
> as well. And lastly, NSA310 has a RealTek 8169 onboard.
>
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> ---
> arch/arm/configs/kirkwood_defconfig | 10 +++++++++-
> 1 file changed, 9 insertions(+), 1 deletion(-)
Applied to mvebu/defconfig
thx,
Jason.
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 0/2] Support for another NSA310
2013-07-17 16:51 [PATCH 0/2] Support for another NSA310 Andrew Lunn
2013-07-17 16:51 ` [PATCH 1/2] ARM: Kirkwood: Add support for another ZyXEL NSA310 variant Andrew Lunn
2013-07-17 16:51 ` [PATCH 2/2] ARM: Kirkwood: update defconfig for used i2c devices, EXT4 FS, r8169 Andrew Lunn
@ 2013-08-08 13:53 ` Andrew Lunn
[not found] ` <5203C5A4.8000906@harsszegi.com>
2 siblings, 1 reply; 7+ messages in thread
From: Andrew Lunn @ 2013-08-08 13:53 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jul 17, 2013 at 06:51:48PM +0200, Andrew Lunn wrote:
> There are apparently three different designs of the ZyXEL NSA310 NAS
> box. This patchset adds support for a second one, refactoring the
> common DTS parts into a shared DTSI file.
>
> What is not clear is naming. There is no obvious marketing name
> difference, hardware version label, etc. So for the same of argument,
> this new device uses the name NSA310a in DTS.
>
> The second patch adds to the kirkwood_defconfig drivers not already in
> the default configuration, plus some additional drivers used by other
> kirkwood devices. The aim is to improve build test coverage.
I've rebased these patches onto 3.11-rc4, which contains Thomas's PCI
fix, so that the Ethernet should work again. There are no changes to
my patches. It would be nice if people could test on there hardware
and send some tested-by:
You can get the code from:
https://github.com/lunn/linux.git v3.11-rc4-nsa310-tdc
Thanks
Andrew
^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH 0/2] Support for another NSA310
[not found] ` <5203C5A4.8000906@harsszegi.com>
@ 2013-08-08 16:25 ` Andrew Lunn
0 siblings, 0 replies; 7+ messages in thread
From: Andrew Lunn @ 2013-08-08 16:25 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Aug 08, 2013 at 06:21:56PM +0200, Tibor Harsszegi wrote:
> >On Wed, Jul 17, 2013 at 06:51:48PM +0200, Andrew Lunn wrote:
> >>There are apparently three different designs of the ZyXEL NSA310 NAS
> >>box. This patchset adds support for a second one, refactoring the
> >>common DTS parts into a shared DTSI file.
> >>
> >>What is not clear is naming. There is no obvious marketing name
> >>difference, hardware version label, etc. So for the same of argument,
> >>this new device uses the name NSA310a in DTS.
> >>
> >>The second patch adds to the kirkwood_defconfig drivers not already in
> >>the default configuration, plus some additional drivers used by other
> >>kirkwood devices. The aim is to improve build test coverage.
> >I've rebased these patches onto 3.11-rc4, which contains Thomas's PCI
> >fix, so that the Ethernet should work again. There are no changes to
> >my patches. It would be nice if people could test on there hardware
> >and send some tested-by:
> Hello, can confirm the nsa310a works fine (sytem boots, LEDs are
> working, eth0
> is up and running).
Hi Tibor
thanks for testing. Is it O.K. if i add a Tested-By: tag with your
name. See:
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/SubmittingPatches#n423
Thanks
Andrew
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2013-08-08 16:25 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-07-17 16:51 [PATCH 0/2] Support for another NSA310 Andrew Lunn
2013-07-17 16:51 ` [PATCH 1/2] ARM: Kirkwood: Add support for another ZyXEL NSA310 variant Andrew Lunn
2013-07-25 20:04 ` Jason Cooper
2013-07-17 16:51 ` [PATCH 2/2] ARM: Kirkwood: update defconfig for used i2c devices, EXT4 FS, r8169 Andrew Lunn
2013-07-25 20:09 ` Jason Cooper
2013-08-08 13:53 ` [PATCH 0/2] Support for another NSA310 Andrew Lunn
[not found] ` <5203C5A4.8000906@harsszegi.com>
2013-08-08 16:25 ` Andrew Lunn
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).