From: sachin.kamat@linaro.org (Sachin Kamat)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/6] clk: exynos5250: Staticize local symbols
Date: Thu, 18 Jul 2013 15:31:19 +0530 [thread overview]
Message-ID: <1374141682-29432-4-git-send-email-sachin.kamat@linaro.org> (raw)
In-Reply-To: <1374141682-29432-1-git-send-email-sachin.kamat@linaro.org>
Symbols referenced only in this file are made static.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
---
drivers/clk/samsung/clk-exynos5250.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos5250.c b/drivers/clk/samsung/clk-exynos5250.c
index 3da0bdf..e6a4be1 100644
--- a/drivers/clk/samsung/clk-exynos5250.c
+++ b/drivers/clk/samsung/clk-exynos5250.c
@@ -193,24 +193,24 @@ PNAME(mout_spdif_p) = { "sclk_audio0", "sclk_audio1", "sclk_audio2",
"spdif_extclk" };
/* fixed rate clocks generated outside the soc */
-struct samsung_fixed_rate_clock exynos5250_fixed_rate_ext_clks[] __initdata = {
+static struct samsung_fixed_rate_clock exynos5250_fixed_rate_ext_clks[] __initdata = {
FRATE(fin_pll, "fin_pll", NULL, CLK_IS_ROOT, 0),
};
/* fixed rate clocks generated inside the soc */
-struct samsung_fixed_rate_clock exynos5250_fixed_rate_clks[] __initdata = {
+static struct samsung_fixed_rate_clock exynos5250_fixed_rate_clks[] __initdata = {
FRATE(none, "sclk_hdmiphy", NULL, CLK_IS_ROOT, 24000000),
FRATE(none, "sclk_hdmi27m", NULL, CLK_IS_ROOT, 27000000),
FRATE(none, "sclk_dptxphy", NULL, CLK_IS_ROOT, 24000000),
FRATE(none, "sclk_uhostphy", NULL, CLK_IS_ROOT, 48000000),
};
-struct samsung_fixed_factor_clock exynos5250_fixed_factor_clks[] __initdata = {
+static struct samsung_fixed_factor_clock exynos5250_fixed_factor_clks[] __initdata = {
FFACTOR(none, "fout_mplldiv2", "fout_mpll", 1, 2, 0),
FFACTOR(none, "fout_bplldiv2", "fout_bpll", 1, 2, 0),
};
-struct samsung_mux_clock exynos5250_mux_clks[] __initdata = {
+static struct samsung_mux_clock exynos5250_mux_clks[] __initdata = {
MUX_A(none, "mout_apll", mout_apll_p, SRC_CPU, 0, 1, "mout_apll"),
MUX_A(none, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1, "mout_cpu"),
MUX(none, "mout_mpll_fout", mout_mpll_fout_p, PLL_DIV2_SEL, 4, 1),
@@ -256,7 +256,7 @@ struct samsung_mux_clock exynos5250_mux_clks[] __initdata = {
MUX(none, "mout_spi2", mout_group1_p, SRC_PERIC1, 24, 4),
};
-struct samsung_div_clock exynos5250_div_clks[] __initdata = {
+static struct samsung_div_clock exynos5250_div_clks[] __initdata = {
DIV(none, "div_arm", "mout_cpu", DIV_CPU0, 0, 3),
DIV(none, "sclk_apll", "mout_apll", DIV_CPU0, 24, 3),
DIV(none, "aclk66_pre", "sclk_mpll_user", DIV_TOP1, 24, 3),
@@ -316,7 +316,7 @@ struct samsung_div_clock exynos5250_div_clks[] __initdata = {
DIV_PERIC2, 8, 8, CLK_SET_RATE_PARENT, 0),
};
-struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
+static struct samsung_gate_clock exynos5250_gate_clks[] __initdata = {
GATE(gscl0, "gscl0", "none", GATE_IP_GSCL, 0, 0, 0),
GATE(gscl1, "gscl1", "none", GATE_IP_GSCL, 1, 0, 0),
GATE(gscl2, "gscl2", "aclk266", GATE_IP_GSCL, 2, 0, 0),
@@ -474,7 +474,7 @@ static __initdata struct of_device_id ext_clk_match[] = {
};
/* register exynox5250 clocks */
-void __init exynos5250_clk_init(struct device_node *np)
+static void __init exynos5250_clk_init(struct device_node *np)
{
void __iomem *reg_base;
struct clk *apll, *mpll, *epll, *vpll, *bpll, *gpll, *cpll;
--
1.7.9.5
next prev parent reply other threads:[~2013-07-18 10:01 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-18 10:01 [PATCH v2 0/6] clk: exynos: Some fixes and cleanup Sachin Kamat
2013-07-18 10:01 ` [PATCH 1/6] clk: exynos4: Staticize local symbols Sachin Kamat
2013-07-18 10:01 ` [PATCH 2/6] clk: exynos4: Remove unused function Sachin Kamat
2013-07-18 10:01 ` Sachin Kamat [this message]
2013-07-18 10:01 ` [PATCH 4/6] clk: exynos5420: Staticize local symbols Sachin Kamat
2013-07-18 10:01 ` [PATCH 5/6] clk: exynos5440: " Sachin Kamat
2013-07-18 10:01 ` [PATCH 6/6] clk: exynos-audss: Staticize exynos_audss_clk_init Sachin Kamat
2013-07-22 17:10 ` [PATCH v2 0/6] clk: exynos: Some fixes and cleanup Tomasz Figa
2013-07-22 18:05 ` Mike Turquette
2013-07-23 2:53 ` Sachin Kamat
-- strict thread matches above, loose matches on Subject: below --
2013-07-11 9:02 [PATCH " Sachin Kamat
2013-07-11 9:02 ` [PATCH 3/6] clk: exynos5250: Staticize local symbols Sachin Kamat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1374141682-29432-4-git-send-email-sachin.kamat@linaro.org \
--to=sachin.kamat@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).