From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 01/17] clocksource: Extract max nsec calculation into separate function
Date: Thu, 18 Jul 2013 16:21:14 -0700 [thread overview]
Message-ID: <1374189690-10810-2-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1374189690-10810-1-git-send-email-sboyd@codeaurora.org>
We need to calculate the same number in the clocksource code and
the sched_clock code, so extract this code into its own function.
We also drop the min_t and just use min() because the two types
are the same.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
include/linux/clocksource.h | 2 ++
kernel/time/clocksource.c | 45 ++++++++++++++++++++++++++++++---------------
2 files changed, 32 insertions(+), 15 deletions(-)
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index dbbf8aa..67301a4 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -292,6 +292,8 @@ extern void clocksource_resume(void);
extern struct clocksource * __init __weak clocksource_default_clock(void);
extern void clocksource_mark_unstable(struct clocksource *cs);
+extern u64
+clocks_calc_max_nsecs(u32 mult, u32 shift, u32 maxadj, u64 mask);
extern void
clocks_calc_mult_shift(u32 *mult, u32 *shift, u32 from, u32 to, u32 minsec);
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 50a8736..637a14a 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -537,40 +537,55 @@ static u32 clocksource_max_adjustment(struct clocksource *cs)
}
/**
- * clocksource_max_deferment - Returns max time the clocksource can be deferred
- * @cs: Pointer to clocksource
- *
+ * clocks_calc_max_nsecs - Returns maximum nanoseconds that can be converted
+ * @mult: cycle to nanosecond multiplier
+ * @shift: cycle to nanosecond divisor (power of two)
+ * @maxadj: maximum adjustment value to mult (~11%)
+ * @mask: bitmask for two's complement subtraction of non 64 bit counters
*/
-static u64 clocksource_max_deferment(struct clocksource *cs)
+u64 clocks_calc_max_nsecs(u32 mult, u32 shift, u32 maxadj, u64 mask)
{
u64 max_nsecs, max_cycles;
/*
* Calculate the maximum number of cycles that we can pass to the
* cyc2ns function without overflowing a 64-bit signed result. The
- * maximum number of cycles is equal to ULLONG_MAX/(cs->mult+cs->maxadj)
+ * maximum number of cycles is equal to ULLONG_MAX/(mult+maxadj)
* which is equivalent to the below.
- * max_cycles < (2^63)/(cs->mult + cs->maxadj)
- * max_cycles < 2^(log2((2^63)/(cs->mult + cs->maxadj)))
- * max_cycles < 2^(log2(2^63) - log2(cs->mult + cs->maxadj))
- * max_cycles < 2^(63 - log2(cs->mult + cs->maxadj))
- * max_cycles < 1 << (63 - log2(cs->mult + cs->maxadj))
+ * max_cycles < (2^63)/(mult + maxadj)
+ * max_cycles < 2^(log2((2^63)/(mult + maxadj)))
+ * max_cycles < 2^(log2(2^63) - log2(mult + maxadj))
+ * max_cycles < 2^(63 - log2(mult + maxadj))
+ * max_cycles < 1 << (63 - log2(mult + maxadj))
* Please note that we add 1 to the result of the log2 to account for
* any rounding errors, ensure the above inequality is satisfied and
* no overflow will occur.
*/
- max_cycles = 1ULL << (63 - (ilog2(cs->mult + cs->maxadj) + 1));
+ max_cycles = 1ULL << (63 - (ilog2(mult + maxadj) + 1));
/*
* The actual maximum number of cycles we can defer the clocksource is
- * determined by the minimum of max_cycles and cs->mask.
+ * determined by the minimum of max_cycles and mask.
* Note: Here we subtract the maxadj to make sure we don't sleep for
* too long if there's a large negative adjustment.
*/
- max_cycles = min_t(u64, max_cycles, (u64) cs->mask);
- max_nsecs = clocksource_cyc2ns(max_cycles, cs->mult - cs->maxadj,
- cs->shift);
+ max_cycles = min(max_cycles, mask);
+ max_nsecs = clocksource_cyc2ns(max_cycles, mult - maxadj, shift);
+
+ return max_nsecs;
+}
+
+/**
+ * clocksource_max_deferment - Returns max time the clocksource can be deferred
+ * @cs: Pointer to clocksource
+ *
+ */
+static u64 clocksource_max_deferment(struct clocksource *cs)
+{
+ u64 max_nsecs;
+ max_nsecs = clocks_calc_max_nsecs(cs->mult, cs->shift, cs->maxadj,
+ cs->mask);
/*
* To ensure that the clocksource does not wrap whilst we are idle,
* limit the time the clocksource can be deferred by 12.5%. Please
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
next prev parent reply other threads:[~2013-07-18 23:21 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-18 23:21 [PATCH v4 00/17] 64-bit friendly generic sched_clock() Stephen Boyd
2013-07-18 23:21 ` Stephen Boyd [this message]
2013-07-18 23:21 ` [PATCH v4 02/17] sched_clock: Use seqcount instead of rolling our own Stephen Boyd
2013-07-19 9:03 ` Will Deacon
2013-07-19 14:20 ` Nicolas Pitre
2013-07-19 14:27 ` Russell King - ARM Linux
2013-07-18 23:21 ` [PATCH v4 03/17] sched_clock: Use an hrtimer instead of timer Stephen Boyd
2013-07-22 18:21 ` John Stultz
2013-07-22 18:45 ` Stephen Boyd
2013-07-22 18:58 ` Stephen Boyd
2013-07-22 19:07 ` Russell King - ARM Linux
2013-07-22 20:48 ` John Stultz
2013-07-22 20:50 ` Stephen Boyd
2013-07-18 23:21 ` [PATCH v4 04/17] sched_clock: Add support for >32 bit sched_clock Stephen Boyd
2013-07-19 9:23 ` Baruch Siach
2013-07-19 16:29 ` Stephen Boyd
2013-07-18 23:21 ` [PATCH v4 05/17] arch_timer: Move to generic sched_clock framework Stephen Boyd
2013-10-02 17:44 ` Will Deacon
2013-10-14 18:44 ` Kevin Hilman
2013-10-14 18:55 ` Stephen Boyd
2013-10-14 20:14 ` Kevin Hilman
2013-10-14 20:18 ` John Stultz
2013-10-14 20:14 ` John Stultz
2013-07-18 23:21 ` [PATCH v4 06/17] sched_clock: Remove sched_clock_func() hook Stephen Boyd
2013-07-18 23:21 ` [PATCH v4 07/17] clocksource: bcm2835: Switch to sched_clock_register() Stephen Boyd
2013-07-19 19:34 ` Stephen Warren
2013-07-30 10:04 ` Daniel Lezcano
2013-07-30 16:12 ` John Stultz
2013-07-18 23:21 ` [PATCH v4 08/17] ocksource: dbx500-prcmu: " Stephen Boyd
2013-07-19 0:18 ` Stephen Boyd
2013-07-18 23:21 ` [PATCH v4 09/17] clocksource: dw_apb_timer_of: " Stephen Boyd
2013-07-18 23:21 ` [PATCH v4 10/17] clocksource: mxs_timer: " Stephen Boyd
2013-07-22 8:10 ` Shawn Guo
2013-07-22 16:23 ` Stephen Boyd
2013-07-18 23:21 ` [PATCH v4 11/17] clocksource: nomadik: " Stephen Boyd
2013-07-18 23:21 ` [PATCH v4 12/17] clocksource: samsung_pwm_timer: " Stephen Boyd
2013-07-18 23:21 ` [PATCH v4 13/17] clocksource: tegra: " Stephen Boyd
2013-07-19 19:34 ` Stephen Warren
2013-07-18 23:21 ` [PATCH v4 14/17] clocksource: time-armada-370-xp: " Stephen Boyd
2013-08-06 9:04 ` Gregory CLEMENT
2013-07-18 23:21 ` [PATCH v4 15/17] clocksource: sirf: Switch to sched_clock_register() and use 64 bits Stephen Boyd
2013-07-18 23:21 ` [PATCH v4 16/17] clocksource: vf_pit_timer: Switch to sched_clock_register() Stephen Boyd
2013-07-18 23:21 ` [PATCH v4 17/17] sched_clock: Deprecate setup_sched_clock() Stephen Boyd
2013-07-18 23:59 ` [PATCH v4 00/17] 64-bit friendly generic sched_clock() John Stultz
2013-07-19 0:23 ` Stephen Boyd
2013-10-02 17:47 ` Will Deacon
2013-10-02 18:02 ` John Stultz
2013-10-02 18:13 ` Will Deacon
2013-07-20 20:51 ` Linus Walleij
2013-07-22 16:24 ` Stephen Boyd
2013-07-22 17:07 ` John Stultz
2013-07-24 14:44 ` Christopher Covington
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1374189690-10810-2-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).