From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 05/17] arch_timer: Move to generic sched_clock framework
Date: Thu, 18 Jul 2013 16:21:18 -0700 [thread overview]
Message-ID: <1374189690-10810-6-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <1374189690-10810-1-git-send-email-sboyd@codeaurora.org>
Register with the generic sched_clock framework now that it
supports 64 bits. This fixes two problems with the current
sched_clock support for machines using the architected timers.
First off, we don't subtract the start value from subsequent
sched_clock calls so we can potentially start off with
sched_clock returning gigantic numbers. Second, there is no
support for suspend/resume handling so problems such as discussed
in 6a4dae5 (ARM: 7565/1: sched: stop sched_clock() during
suspend, 2012-10-23) can happen without this patch. Finally, it
allows us to move the sched_clock setup into drivers clocksource
out of the arch ports.
Cc: Christopher Covington <cov@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
arch/arm/kernel/arch_timer.c | 14 --------------
arch/arm64/Kconfig | 1 +
arch/arm64/kernel/time.c | 10 ----------
drivers/clocksource/arm_arch_timer.c | 4 ++++
4 files changed, 5 insertions(+), 24 deletions(-)
diff --git a/arch/arm/kernel/arch_timer.c b/arch/arm/kernel/arch_timer.c
index 221f07b..1791f12 100644
--- a/arch/arm/kernel/arch_timer.c
+++ b/arch/arm/kernel/arch_timer.c
@@ -11,7 +11,6 @@
#include <linux/init.h>
#include <linux/types.h>
#include <linux/errno.h>
-#include <linux/sched_clock.h>
#include <asm/delay.h>
@@ -22,13 +21,6 @@ static unsigned long arch_timer_read_counter_long(void)
return arch_timer_read_counter();
}
-static u32 sched_clock_mult __read_mostly;
-
-static unsigned long long notrace arch_timer_sched_clock(void)
-{
- return arch_timer_read_counter() * sched_clock_mult;
-}
-
static struct delay_timer arch_delay_timer;
static void __init arch_timer_delay_timer_register(void)
@@ -48,11 +40,5 @@ int __init arch_timer_arch_init(void)
arch_timer_delay_timer_register();
- /* Cache the sched_clock multiplier to save a divide in the hot path. */
- sched_clock_mult = NSEC_PER_SEC / arch_timer_rate;
- sched_clock_func = arch_timer_sched_clock;
- pr_info("sched_clock: ARM arch timer >56 bits at %ukHz, resolution %uns\n",
- arch_timer_rate / 1000, sched_clock_mult);
-
return 0;
}
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 9737e97..e32b471 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -14,6 +14,7 @@ config ARM64
select GENERIC_IOMAP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
+ select GENERIC_SCHED_CLOCK
select GENERIC_SMP_IDLE_THREAD
select GENERIC_TIME_VSYSCALL
select HARDIRQS_SW_RESEND
diff --git a/arch/arm64/kernel/time.c b/arch/arm64/kernel/time.c
index 03dc371..29c39d5 100644
--- a/arch/arm64/kernel/time.c
+++ b/arch/arm64/kernel/time.c
@@ -61,13 +61,6 @@ unsigned long profile_pc(struct pt_regs *regs)
EXPORT_SYMBOL(profile_pc);
#endif
-static u64 sched_clock_mult __read_mostly;
-
-unsigned long long notrace sched_clock(void)
-{
- return arch_timer_read_counter() * sched_clock_mult;
-}
-
void __init time_init(void)
{
u32 arch_timer_rate;
@@ -78,9 +71,6 @@ void __init time_init(void)
if (!arch_timer_rate)
panic("Unable to initialise architected timer.\n");
- /* Cache the sched_clock multiplier to save a divide in the hot path. */
- sched_clock_mult = NSEC_PER_SEC / arch_timer_rate;
-
/* Calibrate the delay loop directly */
lpj_fine = arch_timer_rate / HZ;
}
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 053d846..2facf14 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -17,6 +17,7 @@
#include <linux/interrupt.h>
#include <linux/of_irq.h>
#include <linux/io.h>
+#include <linux/sched_clock.h>
#include <asm/arch_timer.h>
#include <asm/virt.h>
@@ -281,6 +282,9 @@ static int __init arch_timer_register(void)
timecounter_init(&timecounter, &cyclecounter,
arch_counter_get_cntvct());
+ /* 56 bits minimum, so we assume worst case rollover */
+ sched_clock_register(arch_timer_read_counter, 56, arch_timer_rate);
+
if (arch_timer_use_virtual) {
ppi = arch_timer_ppi[VIRT_PPI];
err = request_percpu_irq(ppi, arch_timer_handler_virt,
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation
next prev parent reply other threads:[~2013-07-18 23:21 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-18 23:21 [PATCH v4 00/17] 64-bit friendly generic sched_clock() Stephen Boyd
2013-07-18 23:21 ` [PATCH v4 01/17] clocksource: Extract max nsec calculation into separate function Stephen Boyd
2013-07-18 23:21 ` [PATCH v4 02/17] sched_clock: Use seqcount instead of rolling our own Stephen Boyd
2013-07-19 9:03 ` Will Deacon
2013-07-19 14:20 ` Nicolas Pitre
2013-07-19 14:27 ` Russell King - ARM Linux
2013-07-18 23:21 ` [PATCH v4 03/17] sched_clock: Use an hrtimer instead of timer Stephen Boyd
2013-07-22 18:21 ` John Stultz
2013-07-22 18:45 ` Stephen Boyd
2013-07-22 18:58 ` Stephen Boyd
2013-07-22 19:07 ` Russell King - ARM Linux
2013-07-22 20:48 ` John Stultz
2013-07-22 20:50 ` Stephen Boyd
2013-07-18 23:21 ` [PATCH v4 04/17] sched_clock: Add support for >32 bit sched_clock Stephen Boyd
2013-07-19 9:23 ` Baruch Siach
2013-07-19 16:29 ` Stephen Boyd
2013-07-18 23:21 ` Stephen Boyd [this message]
2013-10-02 17:44 ` [PATCH v4 05/17] arch_timer: Move to generic sched_clock framework Will Deacon
2013-10-14 18:44 ` Kevin Hilman
2013-10-14 18:55 ` Stephen Boyd
2013-10-14 20:14 ` Kevin Hilman
2013-10-14 20:18 ` John Stultz
2013-10-14 20:14 ` John Stultz
2013-07-18 23:21 ` [PATCH v4 06/17] sched_clock: Remove sched_clock_func() hook Stephen Boyd
2013-07-18 23:21 ` [PATCH v4 07/17] clocksource: bcm2835: Switch to sched_clock_register() Stephen Boyd
2013-07-19 19:34 ` Stephen Warren
2013-07-30 10:04 ` Daniel Lezcano
2013-07-30 16:12 ` John Stultz
2013-07-18 23:21 ` [PATCH v4 08/17] ocksource: dbx500-prcmu: " Stephen Boyd
2013-07-19 0:18 ` Stephen Boyd
2013-07-18 23:21 ` [PATCH v4 09/17] clocksource: dw_apb_timer_of: " Stephen Boyd
2013-07-18 23:21 ` [PATCH v4 10/17] clocksource: mxs_timer: " Stephen Boyd
2013-07-22 8:10 ` Shawn Guo
2013-07-22 16:23 ` Stephen Boyd
2013-07-18 23:21 ` [PATCH v4 11/17] clocksource: nomadik: " Stephen Boyd
2013-07-18 23:21 ` [PATCH v4 12/17] clocksource: samsung_pwm_timer: " Stephen Boyd
2013-07-18 23:21 ` [PATCH v4 13/17] clocksource: tegra: " Stephen Boyd
2013-07-19 19:34 ` Stephen Warren
2013-07-18 23:21 ` [PATCH v4 14/17] clocksource: time-armada-370-xp: " Stephen Boyd
2013-08-06 9:04 ` Gregory CLEMENT
2013-07-18 23:21 ` [PATCH v4 15/17] clocksource: sirf: Switch to sched_clock_register() and use 64 bits Stephen Boyd
2013-07-18 23:21 ` [PATCH v4 16/17] clocksource: vf_pit_timer: Switch to sched_clock_register() Stephen Boyd
2013-07-18 23:21 ` [PATCH v4 17/17] sched_clock: Deprecate setup_sched_clock() Stephen Boyd
2013-07-18 23:59 ` [PATCH v4 00/17] 64-bit friendly generic sched_clock() John Stultz
2013-07-19 0:23 ` Stephen Boyd
2013-10-02 17:47 ` Will Deacon
2013-10-02 18:02 ` John Stultz
2013-10-02 18:13 ` Will Deacon
2013-07-20 20:51 ` Linus Walleij
2013-07-22 16:24 ` Stephen Boyd
2013-07-22 17:07 ` John Stultz
2013-07-24 14:44 ` Christopher Covington
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1374189690-10810-6-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).