From: nicolas.pitre@linaro.org (Nicolas Pitre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/13] ARM: bL_switcher: move to dedicated threads rather than workqueues
Date: Mon, 22 Jul 2013 23:31:21 -0400 [thread overview]
Message-ID: <1374550289-25305-6-git-send-email-nicolas.pitre@linaro.org> (raw)
In-Reply-To: <1374550289-25305-1-git-send-email-nicolas.pitre@linaro.org>
The workqueues are problematic as they may be contended.
They can't be scheduled with top priority either. Also the optimization
in bL_switch_request() to skip the workqueue entirely when the target CPU
and the calling CPU were the same didn't allow for bL_switch_request() to
be called from atomic context, as might be the case for some cpufreq
drivers.
Let's move to dedicated kthreads instead.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
---
arch/arm/common/bL_switcher.c | 101 ++++++++++++++++++++++++++++---------
arch/arm/include/asm/bL_switcher.h | 2 +-
2 files changed, 79 insertions(+), 24 deletions(-)
diff --git a/arch/arm/common/bL_switcher.c b/arch/arm/common/bL_switcher.c
index d6f7e507d9..c2355cafc9 100644
--- a/arch/arm/common/bL_switcher.c
+++ b/arch/arm/common/bL_switcher.c
@@ -15,8 +15,10 @@
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/cpu_pm.h>
+#include <linux/cpu.h>
#include <linux/cpumask.h>
-#include <linux/workqueue.h>
+#include <linux/kthread.h>
+#include <linux/wait.h>
#include <linux/clockchips.h>
#include <linux/hrtimer.h>
#include <linux/tick.h>
@@ -225,15 +227,48 @@ static int bL_switch_to(unsigned int new_cluster_id)
return ret;
}
-struct switch_args {
- unsigned int cluster;
- struct work_struct work;
+struct bL_thread {
+ struct task_struct *task;
+ wait_queue_head_t wq;
+ int wanted_cluster;
};
-static void __bL_switch_to(struct work_struct *work)
+static struct bL_thread bL_threads[MAX_CPUS_PER_CLUSTER];
+
+static int bL_switcher_thread(void *arg)
+{
+ struct bL_thread *t = arg;
+ struct sched_param param = { .sched_priority = 1 };
+ int cluster;
+
+ sched_setscheduler_nocheck(current, SCHED_FIFO, ¶m);
+
+ do {
+ if (signal_pending(current))
+ flush_signals(current);
+ wait_event_interruptible(t->wq,
+ t->wanted_cluster != -1 ||
+ kthread_should_stop());
+ cluster = xchg(&t->wanted_cluster, -1);
+ if (cluster != -1)
+ bL_switch_to(cluster);
+ } while (!kthread_should_stop());
+
+ return 0;
+}
+
+static struct task_struct * __init bL_switcher_thread_create(int cpu, void *arg)
{
- struct switch_args *args = container_of(work, struct switch_args, work);
- bL_switch_to(args->cluster);
+ struct task_struct *task;
+
+ task = kthread_create_on_node(bL_switcher_thread, arg,
+ cpu_to_node(cpu), "kswitcher_%d", cpu);
+ if (!IS_ERR(task)) {
+ kthread_bind(task, cpu);
+ wake_up_process(task);
+ } else
+ pr_err("%s failed for CPU %d\n", __func__, cpu);
+ return task;
}
/*
@@ -242,26 +277,46 @@ static void __bL_switch_to(struct work_struct *work)
* @cpu: the CPU to switch
* @new_cluster_id: the ID of the cluster to switch to.
*
- * This function causes a cluster switch on the given CPU. If the given
- * CPU is the same as the calling CPU then the switch happens right away.
- * Otherwise the request is put on a work queue to be scheduled on the
- * remote CPU.
+ * This function causes a cluster switch on the given CPU by waking up
+ * the appropriate switcher thread. This function may or may not return
+ * before the switch has occurred.
*/
-void bL_switch_request(unsigned int cpu, unsigned int new_cluster_id)
+int bL_switch_request(unsigned int cpu, unsigned int new_cluster_id)
{
- unsigned int this_cpu = get_cpu();
- struct switch_args args;
+ struct bL_thread *t;
- if (cpu == this_cpu) {
- bL_switch_to(new_cluster_id);
- put_cpu();
- return;
+ if (cpu >= MAX_CPUS_PER_CLUSTER) {
+ pr_err("%s: cpu %d out of bounds\n", __func__, cpu);
+ return -EINVAL;
}
- put_cpu();
- args.cluster = new_cluster_id;
- INIT_WORK_ONSTACK(&args.work, __bL_switch_to);
- schedule_work_on(cpu, &args.work);
- flush_work(&args.work);
+ t = &bL_threads[cpu];
+ if (IS_ERR(t->task))
+ return PTR_ERR(t->task);
+ if (!t->task)
+ return -ESRCH;
+
+ t->wanted_cluster = new_cluster_id;
+ wake_up(&t->wq);
+ return 0;
}
EXPORT_SYMBOL_GPL(bL_switch_request);
+
+static int __init bL_switcher_init(void)
+{
+ int cpu;
+
+ pr_info("big.LITTLE switcher initializing\n");
+
+ for_each_online_cpu(cpu) {
+ struct bL_thread *t = &bL_threads[cpu];
+ init_waitqueue_head(&t->wq);
+ t->wanted_cluster = -1;
+ t->task = bL_switcher_thread_create(cpu, t);
+ }
+
+ pr_info("big.LITTLE switcher initialized\n");
+ return 0;
+}
+
+late_initcall(bL_switcher_init);
diff --git a/arch/arm/include/asm/bL_switcher.h b/arch/arm/include/asm/bL_switcher.h
index 72efe3f349..e0c0bba70b 100644
--- a/arch/arm/include/asm/bL_switcher.h
+++ b/arch/arm/include/asm/bL_switcher.h
@@ -12,6 +12,6 @@
#ifndef ASM_BL_SWITCHER_H
#define ASM_BL_SWITCHER_H
-void bL_switch_request(unsigned int cpu, unsigned int new_cluster_id);
+int bL_switch_request(unsigned int cpu, unsigned int new_cluster_id);
#endif
--
1.8.1.2
next prev parent reply other threads:[~2013-07-23 3:31 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-23 3:31 [PATCH 00/13] The big.LITTLE In-Kernel Switcher (IKS), part 1 Nicolas Pitre
2013-07-23 3:31 ` [PATCH 01/13] ARM: suspend: use hash of cpu_logical_map value to index into save array Nicolas Pitre
2013-07-24 16:47 ` Dave Martin
2013-07-24 18:55 ` Nicolas Pitre
2013-07-25 10:55 ` Dave Martin
2013-07-25 16:06 ` Nicolas Pitre
2013-07-26 11:31 ` Lorenzo Pieralisi
2013-07-26 14:41 ` Nicolas Pitre
2013-07-26 15:34 ` Dave Martin
2013-07-26 15:43 ` Nicolas Pitre
2013-07-26 15:45 ` Dave Martin
2013-07-26 17:04 ` Lorenzo Pieralisi
2013-07-26 19:19 ` Nicolas Pitre
2013-07-29 11:50 ` Lorenzo Pieralisi
2013-07-30 2:08 ` Nicolas Pitre
2013-07-30 9:15 ` Dave Martin
2013-07-23 3:31 ` [PATCH 02/13] ARM: gic: add CPU migration support Nicolas Pitre
2013-07-25 11:44 ` Jonathan Austin
2013-07-25 19:11 ` Nicolas Pitre
2013-07-23 3:31 ` [PATCH 03/13] ARM: b.L: core switcher code Nicolas Pitre
2013-07-25 17:15 ` Jonathan Austin
2013-07-25 20:20 ` Nicolas Pitre
2013-07-26 10:45 ` Lorenzo Pieralisi
2013-07-26 14:29 ` Nicolas Pitre
2013-07-26 14:53 ` Russell King - ARM Linux
2013-07-26 15:10 ` Nicolas Pitre
2013-07-23 3:31 ` [PATCH 04/13] ARM: bL_switcher: add clockevent save/restore support Nicolas Pitre
2013-07-23 3:31 ` Nicolas Pitre [this message]
2013-07-26 15:18 ` [PATCH 05/13] ARM: bL_switcher: move to dedicated threads rather than workqueues Lorenzo Pieralisi
2013-07-26 15:39 ` Nicolas Pitre
2013-07-23 3:31 ` [PATCH 06/13] ARM: bL_switcher: simplify stack isolation Nicolas Pitre
2013-07-23 3:31 ` [PATCH 07/13] ARM: bL_switcher: hot-unplug half of the available CPUs Nicolas Pitre
2013-07-23 3:31 ` [PATCH 08/13] ARM: bL_switcher: do not hardcode GIC IDs in the code Nicolas Pitre
2013-07-23 3:31 ` [PATCH 09/13] ARM: bL_switcher: ability to enable and disable the switcher via sysfs Nicolas Pitre
2013-07-23 3:31 ` [PATCH 10/13] ARM: bL_switcher: add kernel cmdline param to disable the switcher on boot Nicolas Pitre
2013-07-23 3:31 ` [PATCH 11/13] ARM: bL_switcher: veto CPU hotplug requests when the switcher is active Nicolas Pitre
2013-07-31 10:30 ` Lorenzo Pieralisi
2013-08-05 4:25 ` Nicolas Pitre
2013-07-23 3:31 ` [PATCH 12/13] ARM: bL_switcher: remove assumptions between logical and physical CPUs Nicolas Pitre
2013-07-30 16:30 ` Lorenzo Pieralisi
2013-07-30 19:15 ` Nicolas Pitre
2013-07-31 9:41 ` Lorenzo Pieralisi
2013-07-23 3:31 ` [PATCH 13/13] ARM: bL_switcher: add a simple /dev user interface for debugging purposes Nicolas Pitre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1374550289-25305-6-git-send-email-nicolas.pitre@linaro.org \
--to=nicolas.pitre@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).