From mboxrd@z Thu Jan 1 00:00:00 1970 From: sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth) Date: Mon, 29 Jul 2013 14:29:05 +0200 Subject: [PATCH 3/4] ARM: dove: add GPIO IR receiver node to SolidRun CuBox In-Reply-To: <1375100946-28521-1-git-send-email-sebastian.hesselbarth@gmail.com> References: <1375100946-28521-1-git-send-email-sebastian.hesselbarth@gmail.com> Message-ID: <1375100946-28521-4-git-send-email-sebastian.hesselbarth@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This adds a node for the IR receiver connected to a GPIO pin on the SolidRun CuBox. Signed-off-by: Sebastian Hesselbarth --- Cc: Russell King Cc: Jason Cooper Cc: Andrew Lunn Cc: linux-arm-kernel at lists.infradead.org Cc: devicetree at vger.kernel.org Cc: linux-kernel at vger.kernel.org --- arch/arm/boot/dts/dove-cubox.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 525fb45..022646e 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -55,6 +55,13 @@ clock-frequency = <25000000>; }; }; + + ir_recv: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 19 1>; + pinctrl-0 = <&pmx_gpio_19>; + pinctrl-names = "default"; + }; }; &uart0 { status = "okay"; }; -- 1.7.10.4