From mboxrd@z Thu Jan  1 00:00:00 1970
From: iivanov@mm-sol.com (Ivan T. Ivanov)
Date: Mon, 29 Jul 2013 22:02:58 +0300
Subject: [PATCH v2 1/6] usb: phy: msm: Move mach depndend code to
 platform data
In-Reply-To: <20130729122344.GH24801@radagast>
References: <1375081464-14206-1-git-send-email-iivanov@mm-sol.com>
 <1375081464-14206-2-git-send-email-iivanov@mm-sol.com>
 <20130729122344.GH24801@radagast>
Message-ID: <1375124578.5444.2.camel@localhost>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hi, 

> > Cc: Bryan Huntsman <bryanh@codeaurora.org>
> > Cc: Felipe Balbi <balbi@ti.com>
> > Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > Cc: linux-arm-kernel at lists.infradead.org
> > Cc: linux-kernel at vger.kernel.org
> > Cc: linux-usb at vger.kernel.org
> > 
> > Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
> > ---
> >  arch/arm/mach-msm/board-msm7x30.c |   35 +++++++++++++++++++++++
> >  arch/arm/mach-msm/board-qsd8x50.c |   35 +++++++++++++++++++++++
> 
> I need acks for these.
> 
> >  drivers/usb/phy/phy-msm-usb.c     |   55 ++++++++++---------------------------
> >  include/linux/usb/msm_hsusb.h     |    3 ++
> >  4 files changed, 87 insertions(+), 41 deletions(-)
> > 
> > diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
> > index db3d8c0..6b35953 100644
> > --- a/arch/arm/mach-msm/board-msm7x30.c
> > +++ b/arch/arm/mach-msm/board-msm7x30.c
> > @@ -31,6 +31,7 @@
> >  #include <asm/setup.h>
> >  
> >  #include <mach/board.h>
> > +#include <mach/clk.h>
> >  #include <mach/msm_iomap.h>
> >  #include <mach/dma.h>
> >  
> > @@ -61,10 +62,44 @@ static int hsusb_phy_init_seq[] = {
> >  	-1
> >  };
> >  
> > +static int hsusb_link_clk_reset(struct clk *link_clk, bool assert)
> 
> looks like you should be using the reset controller framework ?
> (drivers/reset)

Probably, but there still nothing in place in the msm,
which provide this functionality. I am looking it to
right now.

Regards,
Ivan