From mboxrd@z Thu Jan 1 00:00:00 1970 From: t-kristo@ti.com (Tero Kristo) Date: Fri, 2 Aug 2013 19:25:30 +0300 Subject: [PATCHv5 11/31] CLK: TI: omap5: Initialize USB_DPLL at boot In-Reply-To: <1375460751-23676-1-git-send-email-t-kristo@ti.com> References: <1375460751-23676-1-git-send-email-t-kristo@ti.com> Message-ID: <1375460751-23676-12-git-send-email-t-kristo@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Roger Quadros USB_DPLL must be initialized and locked at boot so that USB modules can work. Signed-off-by: Roger Quadros Signed-off-by: Tero Kristo --- drivers/clk/ti/clk-54xx.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c index 52133e7..d539080 100644 --- a/drivers/clk/ti/clk-54xx.c +++ b/drivers/clk/ti/clk-54xx.c @@ -19,6 +19,12 @@ #define OMAP5_DPLL_ABE_DEFFREQ 98304000 +/* + * OMAP543x TRM, section "3.6.3.9.5 DPLL_USB Preferred Settings" + * states it must be at 960MHz + */ +#define OMAP5_DPLL_USB_DEFFREQ 960000000 + static struct omap_dt_clk omap54xx_clks[] = { DT_CLK(NULL, "timer_32k_ck", "sys_32k_ck"), DT_CLK("omap_timer.1", "sys_ck", "sys_clkin"), @@ -38,7 +44,7 @@ static struct omap_dt_clk omap54xx_clks[] = { int __init omap5xxx_clk_init(void) { int rc; - struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck; + struct clk *abe_dpll_ref, *abe_dpll, *sys_32k_ck, *usb_dpll; of_clk_init(NULL); @@ -55,5 +61,15 @@ int __init omap5xxx_clk_init(void) if (rc) pr_err("%s: failed to configure ABE DPLL!\n", __func__); + usb_dpll = clk_get_sys(NULL, "dpll_usb_ck"); + rc = clk_set_rate(usb_dpll, OMAP5_DPLL_USB_DEFFREQ); + if (rc) + pr_err("%s: failed to configure USB DPLL!\n", __func__); + + usb_dpll = clk_get_sys(NULL, "dpll_usb_m2_ck"); + rc = clk_set_rate(usb_dpll, OMAP5_DPLL_USB_DEFFREQ/2); + if (rc) + pr_err("%s: failed to set USB_DPLL M2 OUT\n", __func__); + return 0; } -- 1.7.9.5