From: roy.franz@linaro.org (Roy Franz)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 09/17] Generalize handle_ramdisks() and rename to handle_cmdline_files().
Date: Tue, 6 Aug 2013 20:45:05 -0700 [thread overview]
Message-ID: <1375847113-24884-10-git-send-email-roy.franz@linaro.org> (raw)
In-Reply-To: <1375847113-24884-1-git-send-email-roy.franz@linaro.org>
The handle_cmdline_files now takes the option to handle as a string,
and returns the loaded data through parameters, rather than taking
an x86 specific setup_header structure. For ARM, this will be used
to load a device tree blob in addition to initrd images.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
---
arch/x86/boot/compressed/eboot.c | 9 +++++-
drivers/firmware/efi/efi-stub-helper.c | 50 ++++++++++++++++++--------------
2 files changed, 37 insertions(+), 22 deletions(-)
diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index bcfdcc2..7011e33 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -443,6 +443,8 @@ struct boot_params *make_boot_params(void *handle, efi_system_table_t *_table)
u16 *s2;
u8 *s1;
int i;
+ u64 ramdisk_addr;
+ u64 ramdisk_size;
sys_table = _table;
@@ -531,9 +533,14 @@ struct boot_params *make_boot_params(void *handle, efi_system_table_t *_table)
memset(sdt, 0, sizeof(*sdt));
- status = handle_ramdisks(sys_table, image, hdr);
+ status = handle_cmdline_files(sys_table, image,
+ (char *)(unsigned long)hdr->cmd_line_ptr,
+ "initrd=", hdr->initrd_addr_max,
+ &ramdisk_addr, &ramdisk_size);
if (status != EFI_SUCCESS)
goto fail2;
+ hdr->ramdisk_image = ramdisk_addr;
+ hdr->ramdisk_size = ramdisk_size;
return boot_params;
fail2:
diff --git a/drivers/firmware/efi/efi-stub-helper.c b/drivers/firmware/efi/efi-stub-helper.c
index bce0473..854aada 100644
--- a/drivers/firmware/efi/efi-stub-helper.c
+++ b/drivers/firmware/efi/efi-stub-helper.c
@@ -267,9 +267,11 @@ static void efi_free(efi_system_table_t *sys_table_arg, unsigned long size,
* We only support loading an initrd from the same filesystem as the
* kernel image.
*/
-static efi_status_t handle_ramdisks(efi_system_table_t *sys_table_arg,
- efi_loaded_image_t *image,
- struct setup_header *hdr)
+static efi_status_t handle_cmdline_files(efi_system_table_t *sys_table_arg,
+ efi_loaded_image_t *image,
+ char *cmd_line, char *option_string,
+ u64 max_addr,
+ u64 *load_addr, u64 *load_size)
{
struct initrd *initrds;
unsigned long initrd_addr;
@@ -285,19 +287,25 @@ static efi_status_t handle_ramdisks(efi_system_table_t *sys_table_arg,
initrd_addr = 0;
initrd_total = 0;
- str = (char *)(unsigned long)hdr->cmd_line_ptr;
+ str = cmd_line;
j = 0; /* See close_handles */
+ if (!load_addr || !load_size)
+ return EFI_INVALID_PARAMETER;
+
+ *load_addr = 0;
+ *load_size = 0;
+
if (!str || !*str)
return EFI_SUCCESS;
for (nr_initrds = 0; *str; nr_initrds++) {
- str = strstr(str, "initrd=");
+ str = strstr(str, option_string);
if (!str)
break;
- str += 7;
+ str += strlen(option_string);
/* Skip any leading slashes */
while (*str == '/' || *str == '\\')
@@ -315,11 +323,11 @@ static efi_status_t handle_ramdisks(efi_system_table_t *sys_table_arg,
nr_initrds * sizeof(*initrds),
&initrds);
if (status != EFI_SUCCESS) {
- efi_printk(sys_table_arg, "Failed to alloc mem for initrds\n");
+ efi_printk(sys_table_arg, "Failed to alloc mem for file load\n");
goto fail;
}
- str = (char *)(unsigned long)hdr->cmd_line_ptr;
+ str = cmd_line;
for (i = 0; i < nr_initrds; i++) {
struct initrd *initrd;
efi_file_handle_t *h;
@@ -330,11 +338,11 @@ static efi_status_t handle_ramdisks(efi_system_table_t *sys_table_arg,
efi_char16_t *p;
u64 file_sz;
- str = strstr(str, "initrd=");
+ str = strstr(str, option_string);
if (!str)
break;
- str += 7;
+ str += strlen(option_string);
initrd = &initrds[i];
p = filename_16;
@@ -380,7 +388,7 @@ static efi_status_t handle_ramdisks(efi_system_table_t *sys_table_arg,
status = efi_call_phys5(fh->open, fh, &h, filename_16,
EFI_FILE_MODE_READ, (u64)0);
if (status != EFI_SUCCESS) {
- efi_printk(sys_table_arg, "Failed to open initrd file: ");
+ efi_printk(sys_table_arg, "Failed to open file file: ");
efi_char16_printk(sys_table_arg, filename_16);
efi_printk(sys_table_arg, "\n");
goto close_handles;
@@ -392,7 +400,7 @@ static efi_status_t handle_ramdisks(efi_system_table_t *sys_table_arg,
status = efi_call_phys4(h->get_info, h, &info_guid,
&info_sz, NULL);
if (status != EFI_BUFFER_TOO_SMALL) {
- efi_printk(sys_table_arg, "Failed to get initrd info size\n");
+ efi_printk(sys_table_arg, "Failed to get file info size\n");
goto close_handles;
}
@@ -400,7 +408,7 @@ grow:
status = efi_call_phys3(sys_table_arg->boottime->allocate_pool,
EFI_LOADER_DATA, info_sz, &info);
if (status != EFI_SUCCESS) {
- efi_printk(sys_table_arg, "Failed to alloc mem for initrd info\n");
+ efi_printk(sys_table_arg, "Failed to alloc mem for file info\n");
goto close_handles;
}
@@ -416,7 +424,7 @@ grow:
efi_call_phys1(sys_table_arg->boottime->free_pool, info);
if (status != EFI_SUCCESS) {
- efi_printk(sys_table_arg, "Failed to get initrd info\n");
+ efi_printk(sys_table_arg, "Failed to get file info\n");
goto close_handles;
}
@@ -433,14 +441,14 @@ grow:
* all the initrd's.
*/
status = efi_high_alloc(sys_table_arg, initrd_total, 0x1000,
- &initrd_addr, hdr->initrd_addr_max);
+ &initrd_addr, max_addr);
if (status != EFI_SUCCESS) {
efi_printk(sys_table_arg, "Failed to alloc highmem for initrds\n");
goto close_handles;
}
/* We've run out of free low memory. */
- if (initrd_addr > hdr->initrd_addr_max) {
+ if (initrd_addr > max_addr) {
efi_printk(sys_table_arg, "We've run out of free low memory\n");
status = EFI_INVALID_PARAMETER;
goto free_initrd_total;
@@ -461,7 +469,7 @@ grow:
initrds[j].handle,
&chunksize, addr);
if (status != EFI_SUCCESS) {
- efi_printk(sys_table_arg, "Failed to read initrd\n");
+ efi_printk(sys_table_arg, "Failed to read file\n");
goto free_initrd_total;
}
addr += chunksize;
@@ -475,8 +483,8 @@ grow:
efi_call_phys1(sys_table_arg->boottime->free_pool, initrds);
- hdr->ramdisk_image = initrd_addr;
- hdr->ramdisk_size = initrd_total;
+ *load_addr = initrd_addr;
+ *load_size = initrd_total;
return status;
@@ -489,8 +497,8 @@ close_handles:
free_initrds:
efi_call_phys1(sys_table_arg->boottime->free_pool, initrds);
fail:
- hdr->ramdisk_image = 0;
- hdr->ramdisk_size = 0;
+ *load_addr = 0;
+ *load_size = 0;
return status;
}
--
1.7.10.4
next prev parent reply other threads:[~2013-08-07 3:45 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-07 3:44 [PATCH V2 00/17] EFI stub for ARM Roy Franz
2013-08-07 3:44 ` [PATCH 01/17] EFI stub documentation updates Roy Franz
2013-08-07 3:44 ` [PATCH 02/17] Move common EFI stub code from x86 arch code to common location Roy Franz
2013-08-07 3:44 ` [PATCH 03/17] Add system pointer argument to shared EFI stub related functions so they no longer use global system table pointer as they did when part of eboot.c Roy Franz
2013-08-07 13:08 ` Matt Fleming
2013-08-07 17:10 ` Roy Franz
2013-08-07 21:55 ` Matt Fleming
2013-08-07 3:45 ` [PATCH 04/17] Rename memory allocation/free functions Roy Franz
2013-08-07 13:09 ` Matt Fleming
2013-08-07 17:12 ` Roy Franz
2013-08-07 3:45 ` [PATCH 05/17] Add minimum address parameter to efi_low_alloc() Roy Franz
2013-08-07 3:45 ` [PATCH 06/17] rename __get_map() to efi_get_memory_map(), add parameter to optionally return mmap key. The mmap key is required to exit EFI boot services, and allows efi_get_memory_map() to be used for getting final memory map Roy Franz
2013-08-07 3:45 ` [PATCH 07/17] Enforce minimum alignment of 1 page on allocations. The efi_high_alloc() and efi_low_alloc() functions use the EFI_ALLOCATE_ADDRESS option to the EFI function allocate_pages(), which requires a minimum of page alignment, and rejects all other requests Roy Franz
2013-08-07 3:45 ` [PATCH 08/17] Allow efi_free() to be called with size of 0, and do nothing in that case Roy Franz
2013-08-07 3:45 ` Roy Franz [this message]
2013-08-07 3:45 ` [PATCH 10/17] Renames in handle_cmdline_files() to complete generalization Roy Franz
2013-08-07 13:09 ` Matt Fleming
2013-08-07 3:45 ` [PATCH 11/17] Move EFI_READ_CHUNK_SIZE define to shared location Roy Franz
2013-08-07 3:45 ` [PATCH 12/17] Add proper definitions for some EFI function pointers Roy Franz
2013-08-07 13:09 ` Matt Fleming
2013-08-07 17:20 ` Roy Franz
2013-08-09 14:10 ` Mark Salter
2013-08-09 14:13 ` Roy Franz
2013-08-07 3:45 ` [PATCH 13/17] Fix types in EFI calls to match EFI function definitions Roy Franz
2013-08-07 3:45 ` [PATCH 14/17] resolve warnings found on ARM compile Roy Franz
2013-08-07 3:45 ` [PATCH 15/17] Add strstr to compressed string.c for ARM Roy Franz
2013-08-07 3:45 ` [PATCH 16/17] Add EFI stub " Roy Franz
2013-08-07 18:05 ` Dave Martin
2013-08-07 18:33 ` Leif Lindholm
2013-08-08 21:57 ` Roy Franz
2013-08-09 0:53 ` Roy Franz
2013-08-13 14:21 ` Dave P Martin
2013-08-07 3:45 ` [PATCH 17/17] Add config EFI_STUB for ARM to Kconfig Roy Franz
2013-08-07 7:44 ` [PATCH V2 00/17] EFI stub for ARM Matt Fleming
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1375847113-24884-10-git-send-email-roy.franz@linaro.org \
--to=roy.franz@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).