linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: zonque@gmail.com (Daniel Mack)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 11/12] dma: mmp_pdma: add support for residue reporting
Date: Wed,  7 Aug 2013 12:19:29 +0200	[thread overview]
Message-ID: <1375870770-14263-12-git-send-email-zonque@gmail.com> (raw)
In-Reply-To: <1375870770-14263-1-git-send-email-zonque@gmail.com>

In order to report the channel's residue, we have to memorize the first
dma buffer position when the channel is configured.

Signed-off-by: Daniel Mack <zonque@gmail.com>
---
 drivers/dma/mmp_pdma.c | 39 +++++++++++++++++++++++++++++++++++++--
 1 file changed, 37 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/mmp_pdma.c b/drivers/dma/mmp_pdma.c
index c56da7c..0c4a2d5 100644
--- a/drivers/dma/mmp_pdma.c
+++ b/drivers/dma/mmp_pdma.c
@@ -28,8 +28,8 @@
 #define DALGN		0x00a0
 #define DINT		0x00f0
 #define DDADR		0x0200
-#define DSADR		0x0204
-#define DTADR		0x0208
+#define DSADR(n)	(0x0204 + ((n) << 4))
+#define DTADR(n)	(0x0208 + ((n) << 4))
 #define DCMD		0x020c
 
 #define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
@@ -97,6 +97,13 @@ struct mmp_pdma_chan {
 	struct dma_async_tx_descriptor desc;
 	struct mmp_pdma_phy *phy;
 	enum dma_transfer_direction dir;
+	/*
+	 * We memorize the original start address of the first descriptor as
+	 * well as the original total length so we can later determine the
+	 * channel's residue.
+	 */
+	dma_addr_t start_addr;
+	u32 total_len;
 
 	/* channel's basic info */
 	struct tasklet_struct tasklet;
@@ -469,6 +476,13 @@ mmp_pdma_prep_memcpy(struct dma_chan *dchan,
 		chan->dcmd |= DCMD_BURST32;
 	}
 
+	if (chan->dir == DMA_MEM_TO_DEV)
+		chan->start_addr = dma_src;
+	else
+		chan->start_addr = dma_dst;
+
+	chan->total_len = len;
+
 	do {
 		/* Allocate the link descriptor from DMA pool */
 		new = mmp_pdma_alloc_descriptor(chan);
@@ -540,11 +554,17 @@ mmp_pdma_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
 		return NULL;
 
 	chan->byte_align = false;
+	chan->total_len = 0;
 
 	for_each_sg(sgl, sg, sg_len, i) {
 		addr = sg_dma_address(sg);
 		avail = sg_dma_len(sgl);
 
+		if (!first)
+			chan->start_addr = addr;
+
+		chan->total_len += avail;
+
 		do {
 			len = min_t(size_t, avail, PDMA_MAX_DESC_BYTES);
 			if (addr & 0x7)
@@ -671,6 +691,20 @@ static int mmp_pdma_control(struct dma_chan *dchan, enum dma_ctrl_cmd cmd,
 	return ret;
 }
 
+static unsigned int mmp_pdma_residue(struct mmp_pdma_chan *chan)
+{
+	u32 curr, done;
+
+	if (chan->dir == DMA_DEV_TO_MEM)
+		curr = readl(chan->phy->base + DTADR(chan->phy->idx));
+	else
+		curr = readl(chan->phy->base + DSADR(chan->phy->idx));
+
+	done = curr - chan->start_addr;
+
+	return chan->total_len - done;
+}
+
 static enum dma_status mmp_pdma_tx_status(struct dma_chan *dchan,
 			dma_cookie_t cookie, struct dma_tx_state *txstate)
 {
@@ -680,6 +714,7 @@ static enum dma_status mmp_pdma_tx_status(struct dma_chan *dchan,
 
 	spin_lock_irqsave(&chan->desc_lock, flags);
 	ret = dma_cookie_status(dchan, cookie, txstate);
+	txstate->residue = mmp_pdma_residue(chan);
 	spin_unlock_irqrestore(&chan->desc_lock, flags);
 
 	return ret;
-- 
1.8.3.1

  parent reply	other threads:[~2013-08-07 10:19 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-07 10:19 [PATCH 00/12] dma: pdma: some patches needed for PXA DT environments Daniel Mack
2013-08-07 10:19 ` [PATCH 01/12] dma: mmp_pdma: add protect when alloc/free phy channels Daniel Mack
2013-08-07 12:40   ` Ezequiel Garcia
2013-08-07 12:42     ` Daniel Mack
2013-08-08  8:35     ` Daniel Mack
2013-08-07 10:19 ` [PATCH 02/12] dma: mmp_pdma: clear DRCMR when free a phy channel Daniel Mack
2013-08-07 10:19 ` [PATCH 03/12] dma: mmp_pdma: factor out DRCMR register calculation Daniel Mack
2013-08-07 10:19 ` [PATCH 04/12] dma: mmp_pdma: fix maximum transfer length Daniel Mack
2013-08-07 10:19 ` [PATCH 05/12] dma: mmp_pdma: add filter function Daniel Mack
2013-08-07 10:19 ` [PATCH 06/12] dma: mmp_pdma: make the controller a DMA provider Daniel Mack
2013-08-07 16:12   ` Arnd Bergmann
2013-08-07 16:17     ` Daniel Mack
2013-08-07 20:17       ` Arnd Bergmann
2013-08-08  8:38     ` Daniel Mack
2013-08-09 13:10     ` Daniel Mack
2013-08-09 14:32       ` zhangfei gao
2013-08-09 21:08         ` Arnd Bergmann
2013-08-07 10:19 ` [PATCH 07/12] dma: mmp_pdma: print the number of channels at probe time Daniel Mack
2013-08-07 10:19 ` [PATCH 08/12] dma: mmp_pdma: remove duplicate assignment Daniel Mack
2013-08-07 10:19 ` [PATCH 09/12] dma: mmp_pdma: add support for byte-aligned transfers Daniel Mack
2013-08-08  9:04   ` Xiang Wang
2013-08-08  9:11     ` Daniel Mack
2013-08-16  8:05       ` Xiang Wang
2013-08-07 10:19 ` [PATCH 10/12] dma: mmp_pdma: implement DMA_PAUSE and DMA_RESUME Daniel Mack
2013-08-07 10:19 ` Daniel Mack [this message]
2013-08-07 10:19 ` [PATCH 12/12] dma: mmp_pdma: add support for cyclic DMA descriptors Daniel Mack

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1375870770-14263-12-git-send-email-zonque@gmail.com \
    --to=zonque@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).