From: zonque@gmail.com (Daniel Mack)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 10/11] dma: mmp_pdma: add support for residue reporting
Date: Sat, 10 Aug 2013 18:52:24 +0200 [thread overview]
Message-ID: <1376153545-14361-11-git-send-email-zonque@gmail.com> (raw)
In-Reply-To: <1376153545-14361-1-git-send-email-zonque@gmail.com>
In order to report the channel's residue, we have to memorize the first
dma buffer position when the channel is configured.
Signed-off-by: Daniel Mack <zonque@gmail.com>
---
drivers/dma/mmp_pdma.c | 39 +++++++++++++++++++++++++++++++++++++--
1 file changed, 37 insertions(+), 2 deletions(-)
diff --git a/drivers/dma/mmp_pdma.c b/drivers/dma/mmp_pdma.c
index 7a0956b..ab0303b 100644
--- a/drivers/dma/mmp_pdma.c
+++ b/drivers/dma/mmp_pdma.c
@@ -28,8 +28,8 @@
#define DALGN 0x00a0
#define DINT 0x00f0
#define DDADR 0x0200
-#define DSADR 0x0204
-#define DTADR 0x0208
+#define DSADR(n) (0x0204 + ((n) << 4))
+#define DTADR(n) (0x0208 + ((n) << 4))
#define DCMD 0x020c
#define DCSR_RUN (1 << 31) /* Run Bit (read / write) */
@@ -97,6 +97,13 @@ struct mmp_pdma_chan {
struct dma_async_tx_descriptor desc;
struct mmp_pdma_phy *phy;
enum dma_transfer_direction dir;
+ /*
+ * We memorize the original start address of the first descriptor as
+ * well as the original total length so we can later determine the
+ * channel's residue.
+ */
+ dma_addr_t start_addr;
+ u32 total_len;
/* channel's basic info */
struct tasklet_struct tasklet;
@@ -470,6 +477,13 @@ mmp_pdma_prep_memcpy(struct dma_chan *dchan,
chan->dcmd |= DCMD_BURST32;
}
+ if (chan->dir == DMA_MEM_TO_DEV)
+ chan->start_addr = dma_src;
+ else
+ chan->start_addr = dma_dst;
+
+ chan->total_len = len;
+
do {
/* Allocate the link descriptor from DMA pool */
new = mmp_pdma_alloc_descriptor(chan);
@@ -541,11 +555,17 @@ mmp_pdma_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
return NULL;
chan->byte_align = false;
+ chan->total_len = 0;
for_each_sg(sgl, sg, sg_len, i) {
addr = sg_dma_address(sg);
avail = sg_dma_len(sgl);
+ if (!first)
+ chan->start_addr = addr;
+
+ chan->total_len += avail;
+
do {
len = min_t(size_t, avail, PDMA_MAX_DESC_BYTES);
if (addr & 0x7)
@@ -672,6 +692,20 @@ static int mmp_pdma_control(struct dma_chan *dchan, enum dma_ctrl_cmd cmd,
return ret;
}
+static unsigned int mmp_pdma_residue(struct mmp_pdma_chan *chan)
+{
+ u32 curr, done;
+
+ if (chan->dir == DMA_DEV_TO_MEM)
+ curr = readl(chan->phy->base + DTADR(chan->phy->idx));
+ else
+ curr = readl(chan->phy->base + DSADR(chan->phy->idx));
+
+ done = curr - chan->start_addr;
+
+ return chan->total_len - done;
+}
+
static enum dma_status mmp_pdma_tx_status(struct dma_chan *dchan,
dma_cookie_t cookie, struct dma_tx_state *txstate)
{
@@ -681,6 +715,7 @@ static enum dma_status mmp_pdma_tx_status(struct dma_chan *dchan,
spin_lock_irqsave(&chan->desc_lock, flags);
ret = dma_cookie_status(dchan, cookie, txstate);
+ txstate->residue = mmp_pdma_residue(chan);
spin_unlock_irqrestore(&chan->desc_lock, flags);
return ret;
--
1.8.3.1
next prev parent reply other threads:[~2013-08-10 16:52 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-10 16:52 [PATCH v2 00/11] dma: pdma: some patches needed for PXA DT environments Daniel Mack
2013-08-10 16:52 ` [PATCH v2 01/11] dma: mmp_pdma: factor out DRCMR register calculation Daniel Mack
2013-08-10 16:52 ` [PATCH v2 02/11] dma: mmp_pdma: refactor unlocking path in lookup_phy() Daniel Mack
2013-08-10 16:52 ` [PATCH v2 03/11] dma: mmp_pdma: fix maximum transfer length Daniel Mack
2013-08-10 16:52 ` [PATCH v2 04/11] dma: mmp_pdma: add filter function Daniel Mack
2013-08-10 16:52 ` [PATCH v2 05/11] dma: mmp_pdma: make the controller a DMA provider Daniel Mack
2013-08-10 16:52 ` [PATCH v2 06/11] dma: mmp_pdma: print the number of channels at probe time Daniel Mack
2013-08-10 16:52 ` [PATCH v2 07/11] dma: mmp_pdma: remove duplicate assignment Daniel Mack
2013-08-10 16:52 ` [PATCH v2 08/11] dma: mmp_pdma: add support for byte-aligned transfers Daniel Mack
2013-08-10 16:52 ` [PATCH v2 09/11] dma: mmp_pdma: implement DMA_PAUSE and DMA_RESUME Daniel Mack
2013-08-14 8:15 ` Vinod Koul
2013-08-14 9:02 ` Daniel Mack
2013-08-14 8:30 ` Vinod Koul
2013-08-10 16:52 ` Daniel Mack [this message]
2013-08-14 8:19 ` [PATCH v2 10/11] dma: mmp_pdma: add support for residue reporting Vinod Koul
2013-08-10 16:52 ` [PATCH v2 11/11] dma: mmp_pdma: add support for cyclic DMA descriptors Daniel Mack
2013-08-10 17:18 ` [PATCH v2 00/11] dma: pdma: some patches needed for PXA DT environments Daniel Mack
2013-08-14 8:28 ` Vinod Koul
2013-08-10 21:25 ` Arnd Bergmann
2013-08-13 21:56 ` Daniel Mack
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1376153545-14361-11-git-send-email-zonque@gmail.com \
--to=zonque@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).