From: dinguyen@altera.com (dinguyen at altera.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv4 2/3] ARM: socfpga: dts: Add support for SD/MMC
Date: Wed, 14 Aug 2013 11:48:03 -0500 [thread overview]
Message-ID: <1376498884-9199-2-git-send-email-dinguyen@altera.com> (raw)
In-Reply-To: <1376498884-9199-1-git-send-email-dinguyen@altera.com>
From: Dinh Nguyen <dinguyen@altera.com>
Add bindings for SD/MMC for SOCFPGA.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Seungwon Jeon <tgih.jun@samsung.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: devicetree at vger.kernel.org
Cc: linux-mmc at vger.kernel.org
CC: linux-arm-kernel at lists.infradead.org
v4:
- Add a complete binding example in documentations
- Add a phandle entry for "altr,sysmgr" which links the system
manager to the SD/MMC IP block that controls the SDR timings.
- Split up patches
1/3 - Add syscon binding to sys-mgr node
2/3 - DTS bindings and documentation for SD/MMC on SOCFPGA
3/3 - Driver changes to use the bindings
v3:
- Explicitly reference synopsis-dw-mshc.txt for base bindings
- Remove "dw-mshc-ciu-div" as driver can get clock information dts "ciu" entry
- Fixed indentation issue
v2:
- Remove bus-width and extra line in documentation
- Merge bindings example into a single node in documentation
---
.../devicetree/bindings/mmc/socfpga-dw-mshc.txt | 56 ++++++++++++++++++++
arch/arm/boot/dts/socfpga.dtsi | 11 ++++
arch/arm/boot/dts/socfpga_cyclone5.dts | 13 +++++
arch/arm/boot/dts/socfpga_vt.dts | 11 ++++
4 files changed, 91 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt
diff --git a/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt
new file mode 100644
index 0000000..eaf98cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/socfpga-dw-mshc.txt
@@ -0,0 +1,56 @@
+* Altera SOCFPGA specific extensions to the Synopsis Designware Mobile
+ Storage Host Controller
+
+The Synopsis designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsis dw mshc controller properties described
+by synopsis-dw-mshc.txt and the properties used by the SOCFPGA specific
+extensions to the Synopsis Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be
+ - "altr,socfpga-dw-mshc": for controllers with Altera SOCFPGA
+ specific extensions.
+
+* altr,dw-mshc-sdr-timing: Specifies the value of CIU clock phase shift value
+ in transmit mode and CIU clock phase shift value in receive mode for single
+ data rate mode operation. Refer to notes below for the order of the cells and the
+ valid values.
+
+ Notes for the sdr-timing values:
+
+ The order of the cells should be
+ - First Cell: CIU clock phase shift value for RX mode, smplsel bits in
+ the system manager SDMMC control group.
+ - Second Cell: CIU clock phase shift value for TX mode, drvsel bits in
+ the system manager SDMMC control group.
+
+ Valid values for SDR CIU clock timing for SOCFPGA:
+ - valid value for tx phase shift and rx phase shift is 0 to 7.
+
+* altr,sysmgr: Should be the phandle to the system_mgr node. As this is where
+ this where the register that controls the CIU clock phases
+ reside.
+
+Example:
+ dwmmc0 at ff704000 {
+ compatible = "altr,socfpga-dw-mshc", "snps,dw-mshc";
+ reg = <0xff704000 0x1000>;
+ interrupts = <0 139 4>;
+ fifo-depth = <0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&l4_mp_clk>, <&sdmmc_clk>;
+ clock-names = "biu", "ciu";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ altr,sysmgr = <&system_mgr>;
+ altr,dw-mshc-sdr-timing = <0 3>;
+
+ slot at 0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+ };
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index c31c8e9..9706767 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -468,6 +468,17 @@
cache-level = <2>;
};
+ mmc: dwmmc0 at ff704000 {
+ compatible = "altr,socfpga-dw-mshc";
+ reg = <0xff704000 0x1000>;
+ interrupts = <0 139 4>;
+ fifo-depth = <0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&l4_mp_clk>, <&sdmmc_clk>;
+ clock-names = "biu", "ciu";
+ };
+
/* Local timer */
timer at fffec600 {
compatible = "arm,cortex-a9-twd-timer";
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dts b/arch/arm/boot/dts/socfpga_cyclone5.dts
index 973999d..698dde9 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5.dts
+++ b/arch/arm/boot/dts/socfpga_cyclone5.dts
@@ -54,6 +54,19 @@
status = "okay";
};
+ dwmmc0 at ff704000 {
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ altr,sysmgr = <&system_mgr>;
+ altr,dw-mshc-sdr-timing = <0 3>;
+
+ slot at 0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+ };
+
timer0 at ffc08000 {
clock-frequency = <100000000>;
};
diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts
index d1ec0ca..6f23121 100644
--- a/arch/arm/boot/dts/socfpga_vt.dts
+++ b/arch/arm/boot/dts/socfpga_vt.dts
@@ -46,6 +46,17 @@
status = "okay";
};
+ dwmmc0 at ff704000 {
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+
+ slot at 0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+ };
+
timer0 at ffc08000 {
clock-frequency = <7000000>;
};
--
1.7.9.5
next prev parent reply other threads:[~2013-08-14 16:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-14 16:48 [PATCHv4 1/3] arm: socfpga: dts: Add a syscon binding for sys-mgr dinguyen at altera.com
2013-08-14 16:48 ` dinguyen at altera.com [this message]
2013-08-16 22:36 ` [PATCHv4 2/3] ARM: socfpga: dts: Add support for SD/MMC Stephen Warren
2013-08-21 19:48 ` Dinh Nguyen
2013-08-22 20:13 ` Stephen Warren
2013-08-22 22:39 ` Dinh Nguyen
2013-08-14 16:48 ` [PATCHv4 3/3] mmc: dw_mmc: Use phandle to get SDR timing values from sys-mgr dinguyen at altera.com
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1376498884-9199-2-git-send-email-dinguyen@altera.com \
--to=dinguyen@altera.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).