From mboxrd@z Thu Jan 1 00:00:00 1970 From: rogerq@ti.com (Roger Quadros) Date: Thu, 15 Aug 2013 13:18:21 +0300 Subject: [PATCH v2 1/9] usb: phy: nop: Add gpio_reset to platform data In-Reply-To: <1376561909-4406-1-git-send-email-rogerq@ti.com> References: <1376561909-4406-1-git-send-email-rogerq@ti.com> Message-ID: <1376561909-4406-2-git-send-email-rogerq@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The GPIO number of the RESET line can be passed to the driver using the gpio_reset member. Signed-off-by: Roger Quadros --- include/linux/usb/nop-usb-xceiv.h | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-) diff --git a/include/linux/usb/nop-usb-xceiv.h b/include/linux/usb/nop-usb-xceiv.h index 148d351..1e57acb 100644 --- a/include/linux/usb/nop-usb-xceiv.h +++ b/include/linux/usb/nop-usb-xceiv.h @@ -9,7 +9,9 @@ struct nop_usb_xceiv_platform_data { /* if set fails with -EPROBE_DEFER if can't get regulator */ unsigned int needs_vcc:1; - unsigned int needs_reset:1; + unsigned int needs_reset:1; /* Deprecated */ + + int gpio_reset; }; #if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE)) -- 1.7.4.1