From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Fri, 23 Aug 2013 13:23:07 +0100 Subject: [PATCH 07/40] ARM: ux500: Remove support for Snowball's Ethernet regulator when booting with ATAGs In-Reply-To: <1377260620-18829-1-git-send-email-lee.jones@linaro.org> References: <1377260620-18829-1-git-send-email-lee.jones@linaro.org> Message-ID: <1377260620-18829-8-git-send-email-lee.jones@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org It's time to remove all ATAG support from ux500 and rely solely on Device Tree booting. This patch is part of that endeavour. Signed-off-by: Lee Jones --- arch/arm/mach-ux500/board-mop500.c | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 062f8bf..68bd9d3 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -54,23 +54,6 @@ #include "board-mop500.h" #include "board-mop500-regulators.h" -static struct fixed_voltage_config snowball_gpio_en_3v3_data = { - .supply_name = "EN-3V3", - .gpio = SNOWBALL_EN_3V3_ETH_GPIO, - .microvolts = 3300000, - .enable_high = 1, - .init_data = &gpio_en_3v3_regulator, - .startup_delay = 5000, /* 1200us */ -}; - -static struct platform_device snowball_gpio_en_3v3_regulator_dev = { - .name = "reg-fixed-voltage", - .id = 1, - .dev = { - .platform_data = &snowball_gpio_en_3v3_data, - }, -}; - /* Dynamically populated. */ static struct gpio sdi0_reg_gpios[] = { { 0, GPIOF_OUT_INIT_LOW, "mmci_vsel" }, @@ -368,7 +351,6 @@ static void __init u8500_cryp1_hash1_init(struct device *parent) } static struct platform_device *snowball_platform_devs[] __initdata = { - &snowball_gpio_en_3v3_regulator_dev, &u8500_cpufreq_cooling_device, &sdi0_regulator, }; -- 1.8.1.2