linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: zonque@gmail.com (Daniel Mack)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 2/5] net: ethernet: cpsw: add optional third memory region for CONTROL module
Date: Fri, 23 Aug 2013 16:16:02 +0200	[thread overview]
Message-ID: <1377267365-24057-3-git-send-email-zonque@gmail.com> (raw)
In-Reply-To: <1377267365-24057-1-git-send-email-zonque@gmail.com>

At least the AM33xx SoC has a control module register to configure
details such as the hardware ethernet interface mode.

I'm not sure whether all SoCs which feature the cpsw block have such a
register, so that third memory region is considered optional for now.

Signed-off-by: Daniel Mack <zonque@gmail.com>
---
 Documentation/devicetree/bindings/net/cpsw.txt |  5 ++++-
 drivers/net/ethernet/ti/cpsw.c                 | 16 ++++++++++++++++
 2 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt
index 05d660e..4e5ca54 100644
--- a/Documentation/devicetree/bindings/net/cpsw.txt
+++ b/Documentation/devicetree/bindings/net/cpsw.txt
@@ -4,7 +4,10 @@ TI SoC Ethernet Switch Controller Device Tree Bindings
 Required properties:
 - compatible		: Should be "ti,cpsw"
 - reg			: physical base address and size of the cpsw
-			  registers map
+			  registers map.
+			  An optional third memory region can be supplied if
+			  the platform has a control module register to
+			  configure phy interface details
 - interrupts		: property with a value describing the interrupt
 			  number
 - interrupt-parent	: The parent interrupt controller
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 849af52..7a25ff4 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -372,6 +372,7 @@ struct cpsw_priv {
 	struct cpsw_platform_data	data;
 	struct cpsw_ss_regs __iomem	*regs;
 	struct cpsw_wr_regs __iomem	*wr_regs;
+	u32 __iomem			*gmii_sel_reg;
 	u8 __iomem			*hw_stats;
 	struct cpsw_host_regs __iomem	*host_port_regs;
 	u32				msg_enable;
@@ -1999,6 +2000,21 @@ static int cpsw_probe(struct platform_device *pdev)
 		goto clean_runtime_disable_ret;
 	}
 
+	/* If the control memory region is unspecified, continue without it.
+	 * If it is specified, but we're unable to reserve it, bail.
+	 */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	if (!res) {
+		dev_info(priv->dev, "error getting control i/o resource\n");
+		goto no_gmii_sel;
+	}
+	priv->gmii_sel_reg = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->gmii_sel_reg)) {
+		dev_err(priv->dev, "unable to map control i/o region\n");
+		goto clean_runtime_disable_ret;
+	}
+
+no_gmii_sel:
 	memset(&dma_params, 0, sizeof(dma_params));
 	memset(&ale_params, 0, sizeof(ale_params));
 
-- 
1.8.3.1

  parent reply	other threads:[~2013-08-23 14:16 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-23 14:16 [PATCH v4 0/5] cpsw: support for control module register Daniel Mack
2013-08-23 14:16 ` [PATCH v4 1/5] net: ethernet: cpsw: switch to devres allocations Daniel Mack
2013-08-23 18:10   ` Sergei Shtylyov
2013-08-23 18:34     ` Daniel Mack
2013-08-23 14:16 ` Daniel Mack [this message]
2013-08-23 14:59   ` [PATCH v4 2/5] net: ethernet: cpsw: add optional third memory region for CONTROL module Sergei Shtylyov
2013-08-23 16:21     ` Daniel Mack
2013-08-23 17:37       ` Sergei Shtylyov
2013-08-23 14:16 ` [PATCH v4 3/5] net: ethernet: cpsw: introduce ti, am3352-cpsw compatible string Daniel Mack
2013-08-23 14:23   ` [PATCH v4 3/5] net: ethernet: cpsw: introduce ti,am3352-cpsw " Santosh Shilimkar
2013-08-23 15:22     ` Benoit Cousson
2013-08-23 15:54       ` Santosh Shilimkar
2013-08-23 16:30     ` Daniel Mack
2013-08-23 16:56       ` Santosh Shilimkar
2013-08-23 17:09         ` Sekhar Nori
2013-08-23 17:17           ` Daniel Mack
2013-08-23 17:19           ` Santosh Shilimkar
2013-08-23 17:24             ` Daniel Mack
2013-08-23 17:28               ` Santosh Shilimkar
2013-08-23 17:39                 ` Sekhar Nori
2013-08-23 18:10                   ` Santosh Shilimkar
2013-08-23 18:29                     ` Mugunthan V N
2013-08-23 19:54                       ` Santosh Shilimkar
2013-08-26  5:59                         ` Mugunthan V N
2013-08-26  6:45                           ` Sekhar Nori
2013-08-23 17:23         ` Mugunthan V N
2013-08-26  5:22           ` Gupta, Pekon
2013-08-23 16:31     ` Sekhar Nori
2013-08-23 16:45     ` Mugunthan V N
2013-08-23 17:05       ` Santosh Shilimkar
2013-08-23 14:16 ` [PATCH v4 4/5] net: ethernet: cpsw: add support for hardware interface mode config Daniel Mack
2013-08-23 16:50   ` Mugunthan V N
2013-08-23 14:16 ` [PATCH v4 5/5] ARM: dts: am33xx: adopt to cpsw changes Daniel Mack

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1377267365-24057-3-git-send-email-zonque@gmail.com \
    --to=zonque@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).