From mboxrd@z Thu Jan 1 00:00:00 1970 From: zonque@gmail.com (Daniel Mack) Date: Fri, 23 Aug 2013 16:16:05 +0200 Subject: [PATCH v4 5/5] ARM: dts: am33xx: adopt to cpsw changes In-Reply-To: <1377267365-24057-1-git-send-email-zonque@gmail.com> References: <1377267365-24057-1-git-send-email-zonque@gmail.com> Message-ID: <1377267365-24057-6-git-send-email-zonque@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This third memory region just denotes one single register in the CONTROL module block. The driver uses that in order to set the correct physical ethernet interface modes. Also update the compatible string to make use of the am335x specific features of the cpsw driver. Signed-off-by: Daniel Mack --- arch/arm/boot/dts/am33xx.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index a785b95..c7b41ae 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -446,7 +446,7 @@ }; mac: ethernet at 4a100000 { - compatible = "ti,cpsw"; + compatible = "ti,am3352-cpsw", "ti,cpsw"; ti,hwmods = "cpgmac0"; cpdma_channels = <8>; ale_entries = <1024>; @@ -459,7 +459,8 @@ cpts_clock_mult = <0x80000000>; cpts_clock_shift = <29>; reg = <0x4a100000 0x800 - 0x4a101200 0x100>; + 0x4a101200 0x100 + 0x44e10650 0x4>; #address-cells = <1>; #size-cells = <1>; interrupt-parent = <&intc>; -- 1.8.3.1