From: dinguyen@altera.com (Dinh Nguyen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv4 1/4] arm: dts: Add clock entries for timers in SOCFPGA
Date: Fri, 23 Aug 2013 18:39:36 -0500 [thread overview]
Message-ID: <1377301176.7061.2.camel@linux-builds1> (raw)
In-Reply-To: <1377189026-16656-1-git-send-email-dinguyen@altera.com>
Hi Stephen,
On Thu, 2013-08-22 at 11:30 -0500, Dinh Nguyen wrote:
> From: Dinh Nguyen <dinguyen@altera.com>
>
> Set the correct clock entries for the the timers, and also clean up
> the timer entries for SOCFPGA by removing timer<n> in the timer entry.
>
> Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
> Reviewed-by: Pavel Machek <pavel@denx.de>
> CC: Rob Herring <rob.herring@calxeda.com>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Stephen Warren <swarren@wwwdotorg.org>
> Cc: Ian Campbell <ian.campbell@citrix.com>
> CC: Arnd Bergmann <arnd@arndb.de>
> Cc: Olof Johansson <olof@lixom.net>
> CC: Jamie Iles <jamie@jamieiles.com>
> Cc: John Stultz <john.stultz@linaro.org>
> Cc: Heiko Stuebner <heiko@sntech.de>
> Cc: Pavel Machek <pavel@denx.de>
> Cc: devicetree at vger.kernel.org
> Cc: linux-arm-kernel at lists.infradead.org
> ---
> arch/arm/boot/dts/socfpga.dtsi | 16 ++++++++--------
> arch/arm/boot/dts/socfpga_cyclone5.dts | 8 ++++----
> arch/arm/boot/dts/socfpga_vt.dts | 8 ++++----
> 3 files changed, 16 insertions(+), 16 deletions(-)
>
> diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
> index bee62a2..2cb5cb7 100644
> --- a/arch/arm/boot/dts/socfpga.dtsi
> +++ b/arch/arm/boot/dts/socfpga.dtsi
> @@ -26,10 +26,6 @@
> ethernet1 = &gmac1;
> serial0 = &uart0;
> serial1 = &uart1;
> - timer0 = &timer0;
> - timer1 = &timer1;
> - timer2 = &timer2;
> - timer3 = &timer3;
> };
>
> cpus {
> @@ -475,28 +471,32 @@
> interrupts = <1 13 0xf04>;
> };
>
> - timer0: timer0 at ffc08000 {
> + timer at ffc08000 {
> compatible = "snps,dw-apb-timer-sp";
> interrupts = <0 167 4>;
> reg = <0xffc08000 0x1000>;
> + clocks = <&osc>;
> };
>
> - timer1: timer1 at ffc09000 {
> + timer at ffc09000 {
> compatible = "snps,dw-apb-timer-sp";
> interrupts = <0 168 4>;
> reg = <0xffc09000 0x1000>;
> + clocks = <&osc>;
> };
>
> - timer2: timer2 at ffd00000 {
> + timer at ffd00000 {
> compatible = "snps,dw-apb-timer-osc";
> interrupts = <0 169 4>;
> reg = <0xffd00000 0x1000>;
> + clocks = <&l4_sp_clk>;
> };
>
> - timer3: timer3 at ffd01000 {
> + timer at ffd01000 {
> compatible = "snps,dw-apb-timer-osc";
> interrupts = <0 170 4>;
> reg = <0xffd01000 0x1000>;
> + clocks = <&l4_sp_clk>;
> };
>
> uart0: serial0 at ffc02000 {
> diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dts b/arch/arm/boot/dts/socfpga_cyclone5.dts
> index 973999d..8978790 100644
> --- a/arch/arm/boot/dts/socfpga_cyclone5.dts
> +++ b/arch/arm/boot/dts/socfpga_cyclone5.dts
> @@ -54,19 +54,19 @@
> status = "okay";
> };
>
> - timer0 at ffc08000 {
> + timer at ffc08000 {
> clock-frequency = <100000000>;
> };
>
> - timer1 at ffc09000 {
> + timer at ffc09000 {
> clock-frequency = <100000000>;
> };
>
> - timer2 at ffd00000 {
> + timer at ffd00000 {
> clock-frequency = <25000000>;
> };
>
> - timer3 at ffd01000 {
> + timer at ffd01000 {
> clock-frequency = <25000000>;
> };
>
> diff --git a/arch/arm/boot/dts/socfpga_vt.dts b/arch/arm/boot/dts/socfpga_vt.dts
> index d1ec0ca..679320f 100644
> --- a/arch/arm/boot/dts/socfpga_vt.dts
> +++ b/arch/arm/boot/dts/socfpga_vt.dts
> @@ -46,19 +46,19 @@
> status = "okay";
> };
>
> - timer0 at ffc08000 {
> + timer at ffc08000 {
> clock-frequency = <7000000>;
> };
>
> - timer1 at ffc09000 {
> + timer at ffc09000 {
> clock-frequency = <7000000>;
> };
>
> - timer2 at ffd00000 {
> + timer at ffd00000 {
> clock-frequency = <7000000>;
> };
>
> - timer3 at ffd01000 {
> + timer at ffd01000 {
> clock-frequency = <7000000>;
> };
>
Not sure if you our Ack for:
[
PATCHv4 2/4] arm: dts: Change dw-apb-timer-osc and dw-apb-timer-sp to
just dw-apb-timer
applies to this one too. But just in case, can I get your Ack for this
one too?
Thanks,
Dinh
next prev parent reply other threads:[~2013-08-23 23:39 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-22 16:30 [PATCHv4 1/4] arm: dts: Add clock entries for timers in SOCFPGA dinguyen at altera.com
2013-08-22 16:30 ` [PATCHv4 2/4] arm: dts: Change dw-apb-timer-osc and dw-apb-timer-sp to just dw-apb-timer dinguyen at altera.com
2013-08-22 22:20 ` Stephen Warren
2013-08-22 22:55 ` Dinh Nguyen
2013-08-23 22:44 ` Dinh Nguyen
2013-08-23 23:22 ` Stephen Warren
2013-08-22 16:30 ` [PATCHv4 3/4] clocksource: dw_apb_timer: Move timer defines to header file dinguyen at altera.com
2013-08-25 18:18 ` Pavel Machek
2013-08-22 16:30 ` [PATCHv4 4/4] clocksource: dw_apb_timer_of: Fix read_sched_clock dinguyen at altera.com
2013-08-23 18:07 ` Linus Walleij
2013-08-23 23:39 ` Dinh Nguyen [this message]
2013-08-26 16:43 ` [PATCHv4 1/4] arm: dts: Add clock entries for timers in SOCFPGA Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1377301176.7061.2.camel@linux-builds1 \
--to=dinguyen@altera.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).