From: rnayak@ti.com (Rajendra Nayak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/3] ARM: OMAP4+: Move SRAM data to DT
Date: Thu, 29 Aug 2013 16:53:10 +0530 [thread overview]
Message-ID: <1377775391-13103-3-git-send-email-rnayak@ti.com> (raw)
In-Reply-To: <1377775391-13103-1-git-send-email-rnayak@ti.com>
Use drivers/misc/sram.c driver to manage SRAM on all DT only
OMAP platforms (am33xx, am43xx, omap4 and omap5) instead of
the existing private plat-omap/sram.c
Address and size related data is removed from mach-omap2/sram.c
and now passed to drivers/misc/sram.c from DT.
Users can hence use general purpose allocator apis instead of
OMAP private ones to manage and use SRAM.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
---
arch/arm/boot/dts/am33xx.dtsi | 5 ++---
arch/arm/boot/dts/am4372.dtsi | 5 +++++
arch/arm/boot/dts/omap4.dtsi | 5 +++++
arch/arm/boot/dts/omap5.dtsi | 5 +++++
arch/arm/configs/omap2plus_defconfig | 1 +
arch/arm/mach-omap2/sram.c | 26 +-------------------------
arch/arm/mach-omap2/sram.h | 1 -
7 files changed, 19 insertions(+), 29 deletions(-)
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 38b446b..69cbce9 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -482,9 +482,8 @@
};
ocmcram: ocmcram at 40300000 {
- compatible = "ti,am3352-ocmcram";
- reg = <0x40300000 0x10000>;
- ti,hwmods = "ocmcram";
+ compatible = "mmio-sram";
+ reg = <0x40300000 0x10000>; /* 64k */
};
wkup_m3: wkup_m3 at 44d00000 {
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index ddc1df7..5c8cee1 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -64,5 +64,10 @@
compatible = "ti,am4372-counter32k","ti,omap-counter32k";
reg = <0x44e86000 0x40>;
};
+
+ ocmcram: ocmcram at 40300000 {
+ compatible = "mmio-sram";
+ reg = <0x40300000 0x40000>; /* 256k */
+ };
};
};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 22d9f2b..1ba6a77 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -126,6 +126,11 @@
pinctrl-single,function-mask = <0x7fff>;
};
+ ocmcram: ocmcram at 40304000 {
+ compatible = "mmio-sram";
+ reg = <0x40304000 0xa000>; /* 40k */
+ };
+
sdma: dma-controller at 4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index e643620..461ffd8 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -119,6 +119,11 @@
pinctrl-single,function-mask = <0x7fff>;
};
+ ocmcram: ocmcram at 40300000 {
+ compatible = "mmio-sram";
+ reg = <0x40300000 0x20000>; /* 128k */
+ };
+
sdma: dma-controller at 4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 5339e6a..5d4c9b8 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -101,6 +101,7 @@ CONFIG_SENSORS_LIS3LV02D=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_LIS3_I2C=m
CONFIG_BMP085_I2C=m
+CONFIG_SRAM=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_MULTI_LUN=y
diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c
index 305fc2b..d5ecb75 100644
--- a/arch/arm/mach-omap2/sram.c
+++ b/arch/arm/mach-omap2/sram.c
@@ -32,12 +32,6 @@
#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
-#ifdef CONFIG_OMAP4_ERRATA_I688
-#define OMAP4_SRAM_PUB_PA OMAP4_SRAM_PA
-#else
-#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
-#endif
-#define OMAP5_SRAM_PA 0x40300000
#define SRAM_BOOTLOADER_SZ 0x00
@@ -105,32 +99,14 @@ static void __init omap_detect_sram(void)
} else {
omap_sram_size = 0x8000; /* 32K */
}
- } else if (cpu_is_omap44xx()) {
- omap_sram_start = OMAP4_SRAM_PUB_PA;
- omap_sram_size = 0xa000; /* 40K */
- } else if (soc_is_omap54xx()) {
- omap_sram_start = OMAP5_SRAM_PA;
- omap_sram_size = SZ_128K; /* 128KB */
} else {
omap_sram_start = OMAP2_SRAM_PUB_PA;
omap_sram_size = 0x800; /* 2K */
}
} else {
- if (soc_is_am33xx()) {
- omap_sram_start = AM33XX_SRAM_PA;
- omap_sram_size = 0x10000; /* 64K */
- } else if (soc_is_am43xx()) {
- omap_sram_start = AM33XX_SRAM_PA;
- omap_sram_size = SZ_256K;
- } else if (cpu_is_omap34xx()) {
+ if (cpu_is_omap34xx()) {
omap_sram_start = OMAP3_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
- } else if (cpu_is_omap44xx()) {
- omap_sram_start = OMAP4_SRAM_PA;
- omap_sram_size = 0xe000; /* 56K */
- } else if (soc_is_omap54xx()) {
- omap_sram_start = OMAP5_SRAM_PA;
- omap_sram_size = SZ_128K; /* 128KB */
} else {
omap_sram_start = OMAP2_SRAM_PA;
if (cpu_is_omap242x())
diff --git a/arch/arm/mach-omap2/sram.h b/arch/arm/mach-omap2/sram.h
index ca7277c..3f83b80 100644
--- a/arch/arm/mach-omap2/sram.h
+++ b/arch/arm/mach-omap2/sram.h
@@ -80,4 +80,3 @@ static inline void omap_push_sram_idle(void) {}
#else
#define OMAP4_SRAM_PA 0x40300000
#endif
-#define AM33XX_SRAM_PA 0x40300000
--
1.7.9.5
next prev parent reply other threads:[~2013-08-29 11:23 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-29 11:23 [PATCH v2 0/3] OMAP4+: Get rid of internal SRAM handling Rajendra Nayak
2013-08-29 11:23 ` [PATCH v2 1/3] ARM: AM335x: Get rid of unused sram init function Rajendra Nayak
2013-08-29 11:23 ` Rajendra Nayak [this message]
2013-08-29 13:26 ` [PATCH v2 2/3] ARM: OMAP4+: Move SRAM data to DT Sekhar Nori
2013-08-29 13:31 ` Santosh Shilimkar
2013-08-29 13:44 ` Sekhar Nori
2013-08-29 13:48 ` Santosh Shilimkar
2013-08-29 13:50 ` Rajendra Nayak
2013-08-29 13:51 ` Santosh Shilimkar
2013-09-02 17:03 ` Sekhar Nori
2013-09-03 13:37 ` Sekhar Nori
2013-08-29 11:23 ` [PATCH v2 3/3] ARM: OMAP4+: Remove static iotable mappings for SRAM Rajendra Nayak
2013-08-29 13:23 ` Santosh Shilimkar
2013-08-29 13:56 ` Rajendra Nayak
2013-08-29 17:20 ` Kevin Hilman
2013-08-29 17:25 ` Santosh Shilimkar
2013-08-30 9:27 ` Rajendra Nayak
2013-08-30 14:39 ` Kevin Hilman
2013-08-30 14:41 ` Santosh Shilimkar
2013-08-29 13:24 ` [PATCH v2 0/3] OMAP4+: Get rid of internal SRAM handling Santosh Shilimkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1377775391-13103-3-git-send-email-rnayak@ti.com \
--to=rnayak@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).