From: ben.dooks@codethink.co.uk (Ben Dooks)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 02/20] ARM: asm: Add ARM_BE8() assembly helper
Date: Fri, 30 Aug 2013 20:10:38 +0100 [thread overview]
Message-ID: <1377889856-9447-3-git-send-email-ben.dooks@codethink.co.uk> (raw)
In-Reply-To: <1377889856-9447-1-git-send-email-ben.dooks@codethink.co.uk>
Add ARM_BE8() helper to wrap any code conditional on being
compile when CONFIG_ARM_ENDIAN_BE8 is selected and convert
existing places where this is to use it.
Acked-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
---
arch/arm/boot/compressed/head.S | 8 ++------
arch/arm/include/asm/assembler.h | 7 +++++++
arch/arm/kernel/entry-armv.S | 5 ++---
arch/arm/kernel/entry-common.S | 4 +---
arch/arm/mm/abort-ev6.S | 5 ++---
arch/arm/mm/proc-v6.S | 4 +---
arch/arm/mm/proc-v7.S | 4 +---
7 files changed, 16 insertions(+), 21 deletions(-)
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 75189f1..c912c2a 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -699,9 +699,7 @@ __armv4_mmu_cache_on:
mrc p15, 0, r0, c1, c0, 0 @ read control reg
orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
orr r0, r0, #0x0030
-#ifdef CONFIG_CPU_ENDIAN_BE8
- orr r0, r0, #1 << 25 @ big-endian page tables
-#endif
+ ARM_BE8( orr r0, r0, #1 << 25 ) @ big-endian page tables
bl __common_mmu_cache_on
mov r0, #0
mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
@@ -728,9 +726,7 @@ __armv7_mmu_cache_on:
orr r0, r0, #1 << 22 @ U (v6 unaligned access model)
@ (needed for ARM1176)
#ifdef CONFIG_MMU
-#ifdef CONFIG_CPU_ENDIAN_BE8
- orr r0, r0, #1 << 25 @ big-endian page tables
-#endif
+ ARM_BE8( orr r0, r0, #1 << 25 ) @ big-endian page tables
mrcne p15, 0, r6, c2, c0, 2 @ read ttb control reg
orrne r0, r0, #1 @ MMU enabled
movne r1, #0xfffffffd @ domain 0 = client
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index a5fef71..5350f83 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -53,6 +53,13 @@
#define put_byte_3 lsl #0
#endif
+/* Select code for any configuration running in BE8 mode */
+#ifdef CONFIG_CPU_ENDIAN_BE8
+#define ARM_BE8(code...) code
+#else
+#define ARM_BE8(code...)
+#endif
+
/*
* Data preload for architectures that support it
*/
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 9cbe70c..55090fb 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -416,9 +416,8 @@ __und_usr:
bne __und_usr_thumb
sub r4, r2, #4 @ ARM instr@LR - 4
1: ldrt r0, [r4]
-#ifdef CONFIG_CPU_ENDIAN_BE8
- rev r0, r0 @ little endian instruction
-#endif
+ ARM_BE8(rev r0, r0) @ little endian instruction
+
@ r0 = 32-bit ARM instruction which caused the exception
@ r2 = PC value for the following instruction (:= regs->ARM_pc)
@ r4 = PC value for the faulting instruction
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 94104bf..cc318cd 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -393,9 +393,7 @@ ENTRY(vector_swi)
#else
USER( ldr r10, [lr, #-4] ) @ get SWI instruction
#endif
-#ifdef CONFIG_CPU_ENDIAN_BE8
- rev r10, r10 @ little endian instruction
-#endif
+ ARM_BE8(rev r10, r10) @ little endian instruction
#elif defined(CONFIG_AEABI)
diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S
index 8074199..3815a82 100644
--- a/arch/arm/mm/abort-ev6.S
+++ b/arch/arm/mm/abort-ev6.S
@@ -38,9 +38,8 @@ ENTRY(v6_early_abort)
bne do_DataAbort
bic r1, r1, #1 << 11 @ clear bit 11 of FSR
ldr r3, [r4] @ read aborted ARM instruction
-#ifdef CONFIG_CPU_ENDIAN_BE8
- rev r3, r3
-#endif
+ ARM_BE8(rev r3, r3)
+
do_ldrd_abort tmp=ip, insn=r3
tst r3, #1 << 20 @ L = 0 -> write
orreq r1, r1, #1 << 11 @ yes.
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 1128064..45dc29f 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -220,9 +220,7 @@ __v6_setup:
#endif /* CONFIG_MMU */
adr r5, v6_crval
ldmia r5, {r5, r6}
-#ifdef CONFIG_CPU_ENDIAN_BE8
- orr r6, r6, #1 << 25 @ big-endian page tables
-#endif
+ ARM_BE8(orr r6, r6, #1 << 25) @ big-endian page tables
mrc p15, 0, r0, c1, c0, 0 @ read control register
bic r0, r0, r5 @ clear bits them
orr r0, r0, r6 @ set them
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 73398bc..03978e3 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -355,9 +355,7 @@ __v7_setup:
#endif
adr r5, v7_crval
ldmia r5, {r5, r6}
-#ifdef CONFIG_CPU_ENDIAN_BE8
- orr r6, r6, #1 << 25 @ big-endian page tables
-#endif
+ ARM_BE8(orr r6, r6, #1 << 25) @ big-endian page tables
#ifdef CONFIG_SWP_EMULATE
orr r5, r5, #(1 << 10) @ set SW bit in "clear"
bic r6, r6, #(1 << 10) @ clear it in "mmuset"
--
1.7.10.4
next prev parent reply other threads:[~2013-08-30 19:10 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-30 19:10 big-endian patch series Ben Dooks
2013-08-30 19:10 ` [PATCH 01/20] ARM: fix ARCH_IXP4xx usage of ARCH_SUPPORTS_BIG_ENDIAN Ben Dooks
2013-08-30 19:10 ` Ben Dooks [this message]
2013-08-30 19:10 ` [PATCH 03/20] ARM: fixup_pv_table bug when CPU_ENDIAN_BE8 Ben Dooks
2013-08-30 19:10 ` [PATCH 04/20] ARM: set BE8 if LE in head code Ben Dooks
2013-08-30 19:10 ` [PATCH 05/20] ARM: pl01x debug code endian fix Ben Dooks
2013-08-30 19:10 ` [PATCH 06/20] ARM: twd: data " Ben Dooks
2013-08-30 19:10 ` [PATCH 07/20] ARM: smp_scu: data endian fixes Ben Dooks
2013-08-30 19:10 ` [PATCH 08/20] highbank: enable big-endian Ben Dooks
2013-08-30 21:40 ` Rob Herring
2013-08-31 20:17 ` Sergei Shtylyov
2013-08-30 19:10 ` [PATCH 09/20] mvebu: support running big-endian Ben Dooks
2013-08-30 19:10 ` [PATCH 10/20] vexpress: add big endian support Ben Dooks
2013-08-30 19:10 ` [PATCH 11/20] ARM: alignment: correctly decode instructions in BE8 mode Ben Dooks
2013-08-30 19:10 ` [PATCH 12/20] ARM: traps: use <asm/opcodes.h> to get correct instruction order Ben Dooks
2013-08-30 19:10 ` [PATCH 13/20] ARM: module: correctly relocate instructions in BE8 Ben Dooks
2013-08-30 19:10 ` [PATCH 14/20] ARM: set --be8 when linking modules Ben Dooks
2013-08-30 19:10 ` [PATCH 15/20] ARM: hardware: fix endian-ness in <hardware/coresight.h> Ben Dooks
2013-08-30 19:10 ` [PATCH 16/20] ARM: net: fix arm instruction endian-ness in bpf_jit_32.c Ben Dooks
2013-08-30 19:10 ` [PATCH 17/20] ARM: Correct BUG() assembly to ensure it is endian-agnostic Ben Dooks
2013-08-30 19:10 ` [PATCH 18/20] ARM: kdgb: use <asm/opcodes.h> for data to be assembled as intruction Ben Dooks
2013-08-30 19:10 ` [PATCH 19/20] ARM: atomic64: fix endian-ness in atomic.h Ben Dooks
2013-08-30 19:10 ` [PATCH 20/20] ARM: signal: sigreturn_codes should be endian neutral to work in BE8 Ben Dooks
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1377889856-9447-3-git-send-email-ben.dooks@codethink.co.uk \
--to=ben.dooks@codethink.co.uk \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).