From mboxrd@z Thu Jan 1 00:00:00 1970 From: ben.dooks@codethink.co.uk (Ben Dooks) Date: Fri, 30 Aug 2013 20:10:41 +0100 Subject: [PATCH 05/20] ARM: pl01x debug code endian fix In-Reply-To: <1377889856-9447-1-git-send-email-ben.dooks@codethink.co.uk> References: <1377889856-9447-1-git-send-email-ben.dooks@codethink.co.uk> Message-ID: <1377889856-9447-6-git-send-email-ben.dooks@codethink.co.uk> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The PL01X debug code needs to take into account which endian mode the processor is running in. If it is big-endian, ensure the data is swapped appropriately. Note, we could do this slightly more efficiently if we have an macro to do the necessary swap for the bits used by test. Reviewed-by: Will Deacon Signed-off-by: Ben Dooks --- arch/arm/include/asm/hardware/debug-pl01x.S | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/include/asm/hardware/debug-pl01x.S b/arch/arm/include/asm/hardware/debug-pl01x.S index f9fd083..6489d1f 100644 --- a/arch/arm/include/asm/hardware/debug-pl01x.S +++ b/arch/arm/include/asm/hardware/debug-pl01x.S @@ -18,12 +18,14 @@ .macro waituart,rd,rx 1001: ldr \rd, [\rx, #UART01x_FR] + ARM_BE8( rev \rd, \rd ) tst \rd, #UART01x_FR_TXFF bne 1001b .endm .macro busyuart,rd,rx 1001: ldr \rd, [\rx, #UART01x_FR] + ARM_BE8( rev \rd, \rd ) tst \rd, #UART01x_FR_BUSY bne 1001b .endm -- 1.7.10.4