From mboxrd@z Thu Jan 1 00:00:00 1970 From: lee.jones@linaro.org (Lee Jones) Date: Tue, 10 Sep 2013 13:49:13 +0100 Subject: [PATCH 12/38] Documentation: dt: iio: Add binding for L3G4200D In-Reply-To: <1378817379-8238-1-git-send-email-lee.jones@linaro.org> References: <1378817379-8238-1-git-send-email-lee.jones@linaro.org> Message-ID: <1378817379-8238-13-git-send-email-lee.jones@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org L3G4200D is a Gyroscope Sensor Signed-off-by: Lee Jones --- .../devicetree/bindings/iio/gyro/l3g4200d.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/gyro/l3g4200d.txt diff --git a/Documentation/devicetree/bindings/iio/gyro/l3g4200d.txt b/Documentation/devicetree/bindings/iio/gyro/l3g4200d.txt new file mode 100644 index 0000000..29baf9d --- /dev/null +++ b/Documentation/devicetree/bindings/iio/gyro/l3g4200d.txt @@ -0,0 +1,21 @@ +* STMicroelectronics Gyroscope Sensor + +Required properties: + - compatible: Should be "st,l3g4200d_gyro" + - reg: The I2C address of the sensor + +Optional properties: + - vdd-supply: Phandle to the Vdd supply regulator + - vddio-supply: Phandle to the Vdd-IO supply regulator + +Example: + +i2c at 80128000 { + l3g4200d_gyro at 68 { + compatible = "st,l3g4200d_gyro"; + reg = <0x68>; + + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + }; +}; -- 1.8.1.2