From: jbe@pengutronix.de (Juergen Beisert)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/6] Staging/iio/adc/touchscreen/MXS: separate i.MX28 specific register bits
Date: Wed, 11 Sep 2013 10:18:27 +0200 [thread overview]
Message-ID: <1378887511-24530-3-git-send-email-jbe@pengutronix.de> (raw)
In-Reply-To: <1378887511-24530-1-git-send-email-jbe@pengutronix.de>
In order to support i.MX23 and i.MX28 within one driver we need to separate the
register definitions which differ in both SoC variants.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
CC: linux-arm-kernel at lists.infradead.org
CC: devel at driverdev.osuosl.org
CC: Marek Vasut <marex@denx.de>
CC: Fabio Estevam <fabio.estevam@freescale.com>
CC: Jonathan Cameron <jic23@cam.ac.uk>
---
drivers/staging/iio/adc/mxs-lradc.c | 61 ++++++++++++++++++++-----------------
1 file changed, 33 insertions(+), 28 deletions(-)
diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c
index dffca90..5535fed 100644
--- a/drivers/staging/iio/adc/mxs-lradc.c
+++ b/drivers/staging/iio/adc/mxs-lradc.c
@@ -179,24 +179,29 @@ struct mxs_lradc {
};
#define LRADC_CTRL0 0x00
-#define LRADC_CTRL0_TOUCH_DETECT_ENABLE (1 << 23)
-#define LRADC_CTRL0_TOUCH_SCREEN_TYPE (1 << 22)
-#define LRADC_CTRL0_YNNSW /* YM */ (1 << 21)
-#define LRADC_CTRL0_YPNSW /* YP */ (1 << 20)
-#define LRADC_CTRL0_YPPSW /* YP */ (1 << 19)
-#define LRADC_CTRL0_XNNSW /* XM */ (1 << 18)
-#define LRADC_CTRL0_XNPSW /* XM */ (1 << 17)
-#define LRADC_CTRL0_XPPSW /* XP */ (1 << 16)
-#define LRADC_CTRL0_PLATE_MASK (0x3f << 16)
+# define LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE (1 << 23)
+# define LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE (1 << 22)
+# define LRADC_CTRL0_MX28_YNNSW /* YM */ (1 << 21)
+# define LRADC_CTRL0_MX28_YPNSW /* YP */ (1 << 20)
+# define LRADC_CTRL0_MX28_YPPSW /* YP */ (1 << 19)
+# define LRADC_CTRL0_MX28_XNNSW /* XM */ (1 << 18)
+# define LRADC_CTRL0_MX28_XNPSW /* XM */ (1 << 17)
+# define LRADC_CTRL0_MX28_XPPSW /* XP */ (1 << 16)
+
+# define LRADC_CTRL0_MX28_PLATE_MASK \
+ (LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE | \
+ LRADC_CTRL0_MX28_YNNSW | LRADC_CTRL0_MX28_YPNSW | \
+ LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW | \
+ LRADC_CTRL0_MX28_XNPSW | LRADC_CTRL0_MX28_XPPSW)
#define LRADC_CTRL1 0x10
#define LRADC_CTRL1_TOUCH_DETECT_IRQ_EN (1 << 24)
#define LRADC_CTRL1_LRADC_IRQ_EN(n) (1 << ((n) + 16))
-#define LRADC_CTRL1_LRADC_IRQ_EN_MASK (0x1fff << 16)
+#define LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK (0x1fff << 16)
#define LRADC_CTRL1_LRADC_IRQ_EN_OFFSET 16
#define LRADC_CTRL1_TOUCH_DETECT_IRQ (1 << 8)
#define LRADC_CTRL1_LRADC_IRQ(n) (1 << (n))
-#define LRADC_CTRL1_LRADC_IRQ_MASK 0x1fff
+#define LRADC_CTRL1_MX28_LRADC_IRQ_MASK 0x1fff
#define LRADC_CTRL1_LRADC_IRQ_OFFSET 0
#define LRADC_CTRL2 0x20
@@ -264,7 +269,7 @@ static int mxs_lradc_read_raw(struct iio_dev *iio_dev,
* Virtual channel 0 is always used here as the others are always not
* used if doing raw sampling.
*/
- writel(LRADC_CTRL1_LRADC_IRQ_EN_MASK,
+ writel(LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
writel(0xff, lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
@@ -319,9 +324,9 @@ static int mxs_lradc_ts_touched(struct mxs_lradc *lradc)
uint32_t reg;
/* Enable touch detection. */
- writel(LRADC_CTRL0_PLATE_MASK,
+ writel(LRADC_CTRL0_MX28_PLATE_MASK,
lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
- writel(LRADC_CTRL0_TOUCH_DETECT_ENABLE,
+ writel(LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE,
lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_SET);
msleep(LRADC_TS_SAMPLE_DELAY_MS);
@@ -367,21 +372,21 @@ static int32_t mxs_lradc_ts_sample(struct mxs_lradc *lradc,
*/
switch (plate) {
case LRADC_SAMPLE_X:
- ctrl0 = LRADC_CTRL0_XPPSW | LRADC_CTRL0_XNNSW;
+ ctrl0 = LRADC_CTRL0_MX28_XPPSW | LRADC_CTRL0_MX28_XNNSW;
chan = 3;
break;
case LRADC_SAMPLE_Y:
- ctrl0 = LRADC_CTRL0_YPPSW | LRADC_CTRL0_YNNSW;
+ ctrl0 = LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_YNNSW;
chan = 4;
break;
case LRADC_SAMPLE_PRESSURE:
- ctrl0 = LRADC_CTRL0_YPPSW | LRADC_CTRL0_XNNSW;
+ ctrl0 = LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW;
chan = 5;
break;
}
if (change) {
- writel(LRADC_CTRL0_PLATE_MASK,
+ writel(LRADC_CTRL0_MX28_PLATE_MASK,
lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
writel(ctrl0, lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_SET);
@@ -442,7 +447,7 @@ static void mxs_lradc_ts_work(struct work_struct *ts_work)
while (mxs_lradc_ts_touched(lradc)) {
/* Disable touch detector so we can sample the touchscreen. */
- writel(LRADC_CTRL0_TOUCH_DETECT_ENABLE,
+ writel(LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE,
lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
if (likely(valid)) {
@@ -491,7 +496,7 @@ static int mxs_lradc_ts_open(struct input_dev *dev)
lradc->stop_touchscreen = false;
/* Enable the touch-detect circuitry. */
- writel(LRADC_CTRL0_TOUCH_DETECT_ENABLE,
+ writel(LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE,
lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_SET);
/* Enable the touch-detect IRQ. */
@@ -517,7 +522,7 @@ static void mxs_lradc_ts_close(struct input_dev *dev)
lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
/* Power-down touchscreen touch-detect circuitry. */
- writel(LRADC_CTRL0_TOUCH_DETECT_ENABLE,
+ writel(LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE,
lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
}
@@ -581,7 +586,7 @@ static irqreturn_t mxs_lradc_handle_irq(int irq, void *data)
LRADC_CTRL1_TOUCH_DETECT_IRQ_EN |
LRADC_CTRL1_TOUCH_DETECT_IRQ;
- if (!(reg & LRADC_CTRL1_LRADC_IRQ_MASK))
+ if (!(reg & LRADC_CTRL1_MX28_LRADC_IRQ_MASK))
return IRQ_NONE;
/*
@@ -601,7 +606,7 @@ static irqreturn_t mxs_lradc_handle_irq(int irq, void *data)
else if (reg & LRADC_CTRL1_LRADC_IRQ(0))
complete(&lradc->completion);
- writel(reg & LRADC_CTRL1_LRADC_IRQ_MASK,
+ writel(reg & LRADC_CTRL1_MX28_LRADC_IRQ_MASK,
lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
return IRQ_HANDLED;
@@ -722,7 +727,7 @@ static int mxs_lradc_buffer_preenable(struct iio_dev *iio)
if (ret < 0)
goto err_buf;
- writel(LRADC_CTRL1_LRADC_IRQ_EN_MASK,
+ writel(LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
writel(0xff, lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
@@ -763,7 +768,7 @@ static int mxs_lradc_buffer_postdisable(struct iio_dev *iio)
lradc->base + LRADC_DELAY(0) + STMP_OFFSET_REG_CLR);
writel(0xff, lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
- writel(LRADC_CTRL1_LRADC_IRQ_EN_MASK,
+ writel(LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
kfree(lradc->buffer);
@@ -867,11 +872,11 @@ static int mxs_lradc_hw_init(struct mxs_lradc *lradc)
writel(0, lradc->base + LRADC_DELAY(3));
/* Configure the touchscreen type */
- writel(LRADC_CTRL0_TOUCH_SCREEN_TYPE,
+ writel(LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_CLR);
if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE) {
- writel(LRADC_CTRL0_TOUCH_SCREEN_TYPE,
+ writel(LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
lradc->base + LRADC_CTRL0 + STMP_OFFSET_REG_SET);
}
@@ -885,7 +890,7 @@ static void mxs_lradc_hw_stop(struct mxs_lradc *lradc)
{
int i;
- writel(LRADC_CTRL1_LRADC_IRQ_EN_MASK,
+ writel(LRADC_CTRL1_MX28_LRADC_IRQ_EN_MASK,
lradc->base + LRADC_CTRL1 + STMP_OFFSET_REG_CLR);
for (i = 0; i < LRADC_MAX_DELAY_CHANS; i++)
--
1.8.4.rc3
next prev parent reply other threads:[~2013-09-11 8:18 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-11 8:18 [RFCv4] staging/iio/adc: change the MXS touchscreen driver implementation Juergen Beisert
2013-09-11 8:18 ` [PATCH 1/6] Staging/iio/adc/touchscreen/MXS: distinguish i.MX23's and i.MX28's LRADC Juergen Beisert
2013-09-11 8:18 ` Juergen Beisert [this message]
2013-09-15 10:27 ` [PATCH 2/6] Staging/iio/adc/touchscreen/MXS: separate i.MX28 specific register bits Jonathan Cameron
2013-09-11 8:18 ` [PATCH 3/6] Staging/iio/adc/touchscreen/MXS: simplify register access Juergen Beisert
2013-09-15 10:35 ` Jonathan Cameron
2013-09-16 8:17 ` Jürgen Beisert
2013-09-16 18:39 ` Jonathan Cameron
2013-09-16 14:15 ` Marek Vasut
2013-09-11 8:18 ` [PATCH 4/6] Staging/iio/adc/touchscreen/MXS: add i.MX23 support to the LRADC touchscreen driver Juergen Beisert
2013-09-15 10:50 ` Jonathan Cameron
2013-09-16 8:14 ` Jürgen Beisert
2013-09-16 14:19 ` Marek Vasut
2013-09-11 8:18 ` [PATCH 5/6] Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection Juergen Beisert
2013-09-15 10:56 ` Jonathan Cameron
2013-09-15 16:10 ` Jonathan Cameron
2013-09-16 8:38 ` Jürgen Beisert
2013-09-16 8:10 ` Jürgen Beisert
2013-09-16 9:37 ` Jürgen Beisert
2013-09-16 14:23 ` Marek Vasut
2013-09-16 14:34 ` Jürgen Beisert
2013-09-16 15:10 ` Marek Vasut
2013-09-16 15:30 ` Jonathan Cameron
2013-09-19 12:49 ` Jürgen Beisert
2013-09-19 16:12 ` Jonathan Cameron
2013-09-16 15:28 ` Dmitry Torokhov
2013-09-17 7:33 ` Jürgen Beisert
2013-09-11 8:18 ` [PATCH 6/6] Staging/iio/adc/touchscreen/MXS: Remove old touchscreen detection implementation Juergen Beisert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1378887511-24530-3-git-send-email-jbe@pengutronix.de \
--to=jbe@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).