From: l.stach@pengutronix.de (Lucas Stach)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/2] ARM: dts: imx53-qsb: add TVE entry
Date: Wed, 11 Sep 2013 11:51:07 +0200 [thread overview]
Message-ID: <1378893068-22235-1-git-send-email-l.stach@pengutronix.de> (raw)
From: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
arch/arm/boot/dts/imx53-qsb.dts | 25 +++++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index 512a1f6..2031ccc 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -156,6 +156,15 @@
};
};
+ tve {
+ pinctrl_vga_sync_1: vgasync-grp1 {
+ fsl,pins = <
+ /* VGA_HSYNC, VSYNC with max drive strength */
+ MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6
+ MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6
+ >;
+ };
+ };
};
&uart1 {
@@ -263,8 +272,8 @@
};
ldo8_reg: ldo8 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <3600000>;
+ regulator-min-microvolt = <2750000>;
+ regulator-max-microvolt = <2750000>;
regulator-always-on;
};
@@ -297,6 +306,18 @@
status = "okay";
};
+&tve {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vga_sync_1>;
+ ddc = <&i2c2>;
+ fsl,tve-mode = "vga";
+ status = "okay";
+ dac-supply = <&ldo7_reg>;
+
+ fsl,hsync-pin = <7>; /* IPU DI1 PIN7 via EIM_OE */
+ fsl,vsync-pin = <8>; /* IPU DI1 PIN8 via EIM_RW */
+};
+
&usbh1 {
status = "okay";
};
--
1.8.4.rc3
next reply other threads:[~2013-09-11 9:51 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-11 9:51 Lucas Stach [this message]
2013-09-11 9:51 ` [PATCH 2/2] ARM: dts: imx53-qsb: select open-drain mode for i2c1 pads Lucas Stach
2013-09-13 6:58 ` [PATCH 1/2] ARM: dts: imx53-qsb: add TVE entry Shawn Guo
2013-09-13 8:25 ` Philipp Zabel
2013-09-13 8:38 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1378893068-22235-1-git-send-email-l.stach@pengutronix.de \
--to=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).