* [PATCH] arm64: KVM: Increase max VCPUs per-Guest to 8 @ 2013-09-11 13:02 Anup Patel 2013-09-13 12:46 ` Marc Zyngier 0 siblings, 1 reply; 6+ messages in thread From: Anup Patel @ 2013-09-11 13:02 UTC (permalink / raw) To: linux-arm-kernel Current max VCPUs per-Guest is set to 4 which is preventing us from creating a Guest (or VM) with 8 VCPUs on Host (e.g. X-Gene Storm SOC) with 8 Host CPUs. The correct value of max VCPUs per-Guest should be same as the max CPUs supported by GICv2 which is 8 hence this patch increases KVM_MAX_VCPUS to 8. Signed-off-by: Anup Patel <anup.patel@linaro.org> Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> --- arch/arm64/include/asm/kvm_host.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index 0859a4d..60ef29e 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -26,7 +26,7 @@ #include <asm/kvm_asm.h> #include <asm/kvm_mmio.h> -#define KVM_MAX_VCPUS 4 +#define KVM_MAX_VCPUS 8 #define KVM_USER_MEM_SLOTS 32 #define KVM_PRIVATE_MEM_SLOTS 4 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1 -- 1.7.9.5 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH] arm64: KVM: Increase max VCPUs per-Guest to 8 2013-09-11 13:02 [PATCH] arm64: KVM: Increase max VCPUs per-Guest to 8 Anup Patel @ 2013-09-13 12:46 ` Marc Zyngier 2013-09-14 8:51 ` Andrew Jones 2013-09-14 11:58 ` Andrew Jones 0 siblings, 2 replies; 6+ messages in thread From: Marc Zyngier @ 2013-09-13 12:46 UTC (permalink / raw) To: linux-arm-kernel On 11/09/13 14:02, Anup Patel wrote: > Current max VCPUs per-Guest is set to 4 which is preventing > us from creating a Guest (or VM) with 8 VCPUs on Host (e.g. > X-Gene Storm SOC) with 8 Host CPUs. > > The correct value of max VCPUs per-Guest should be same as > the max CPUs supported by GICv2 which is 8 hence this patch > increases KVM_MAX_VCPUS to 8. If anything, please make it configurable just like we have on 32bit. No reason to impose the extra overhead on everyone. Thanks, M. > Signed-off-by: Anup Patel <anup.patel@linaro.org> > Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> > --- > arch/arm64/include/asm/kvm_host.h | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h > index 0859a4d..60ef29e 100644 > --- a/arch/arm64/include/asm/kvm_host.h > +++ b/arch/arm64/include/asm/kvm_host.h > @@ -26,7 +26,7 @@ > #include <asm/kvm_asm.h> > #include <asm/kvm_mmio.h> > > -#define KVM_MAX_VCPUS 4 > +#define KVM_MAX_VCPUS 8 > #define KVM_USER_MEM_SLOTS 32 > #define KVM_PRIVATE_MEM_SLOTS 4 > #define KVM_COALESCED_MMIO_PAGE_OFFSET 1 > -- Jazz is not dead. It just smells funny... ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] arm64: KVM: Increase max VCPUs per-Guest to 8 2013-09-13 12:46 ` Marc Zyngier @ 2013-09-14 8:51 ` Andrew Jones 2013-09-14 11:58 ` Andrew Jones 1 sibling, 0 replies; 6+ messages in thread From: Andrew Jones @ 2013-09-14 8:51 UTC (permalink / raw) To: linux-arm-kernel On Fri, Sep 13, 2013 at 01:46:59PM +0100, Marc Zyngier wrote: > On 11/09/13 14:02, Anup Patel wrote: > > Current max VCPUs per-Guest is set to 4 which is preventing > > us from creating a Guest (or VM) with 8 VCPUs on Host (e.g. > > X-Gene Storm SOC) with 8 Host CPUs. > > > > The correct value of max VCPUs per-Guest should be same as > > the max CPUs supported by GICv2 which is 8 hence this patch > > increases KVM_MAX_VCPUS to 8. > > If anything, please make it configurable just like we have on 32bit. No > reason to impose the extra overhead on everyone. I have a couple patches I've been meaning to post, one of which does this. I'll get them posted now. drew > > Thanks, > > M. > > > Signed-off-by: Anup Patel <anup.patel@linaro.org> > > Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> > > --- > > arch/arm64/include/asm/kvm_host.h | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h > > index 0859a4d..60ef29e 100644 > > --- a/arch/arm64/include/asm/kvm_host.h > > +++ b/arch/arm64/include/asm/kvm_host.h > > @@ -26,7 +26,7 @@ > > #include <asm/kvm_asm.h> > > #include <asm/kvm_mmio.h> > > > > -#define KVM_MAX_VCPUS 4 > > +#define KVM_MAX_VCPUS 8 > > #define KVM_USER_MEM_SLOTS 32 > > #define KVM_PRIVATE_MEM_SLOTS 4 > > #define KVM_COALESCED_MMIO_PAGE_OFFSET 1 > > > > > -- > Jazz is not dead. It just smells funny... > > > _______________________________________________ > kvmarm mailing list > kvmarm at lists.cs.columbia.edu > https://lists.cs.columbia.edu/cucslists/listinfo/kvmarm ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] arm64: KVM: Increase max VCPUs per-Guest to 8 2013-09-13 12:46 ` Marc Zyngier 2013-09-14 8:51 ` Andrew Jones @ 2013-09-14 11:58 ` Andrew Jones 2013-09-14 12:13 ` Marc Zyngier 1 sibling, 1 reply; 6+ messages in thread From: Andrew Jones @ 2013-09-14 11:58 UTC (permalink / raw) To: linux-arm-kernel On Fri, Sep 13, 2013 at 01:46:59PM +0100, Marc Zyngier wrote: > On 11/09/13 14:02, Anup Patel wrote: > > Current max VCPUs per-Guest is set to 4 which is preventing > > us from creating a Guest (or VM) with 8 VCPUs on Host (e.g. > > X-Gene Storm SOC) with 8 Host CPUs. > > > > The correct value of max VCPUs per-Guest should be same as > > the max CPUs supported by GICv2 which is 8 hence this patch > > increases KVM_MAX_VCPUS to 8. > > If anything, please make it configurable just like we have on 32bit. No > reason to impose the extra overhead on everyone. What type of overhead are we talking about? Memory, right? as kvm_for_each_vcpu is almost always used when iterating. But Anup says in his v2 of this patch "can make things slower". If it's memory, then is so much consumed by each vcpu that we shouldn't always set KVM_MAX_VCPUS to at least the highest number that current hardware supports? Particularly for aarch64 I think we should always be considering multi-platform with the kernel configs. drew > > Thanks, > > M. > > > Signed-off-by: Anup Patel <anup.patel@linaro.org> > > Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> > > --- > > arch/arm64/include/asm/kvm_host.h | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h > > index 0859a4d..60ef29e 100644 > > --- a/arch/arm64/include/asm/kvm_host.h > > +++ b/arch/arm64/include/asm/kvm_host.h > > @@ -26,7 +26,7 @@ > > #include <asm/kvm_asm.h> > > #include <asm/kvm_mmio.h> > > > > -#define KVM_MAX_VCPUS 4 > > +#define KVM_MAX_VCPUS 8 > > #define KVM_USER_MEM_SLOTS 32 > > #define KVM_PRIVATE_MEM_SLOTS 4 > > #define KVM_COALESCED_MMIO_PAGE_OFFSET 1 > > > > > -- > Jazz is not dead. It just smells funny... > > > _______________________________________________ > kvmarm mailing list > kvmarm at lists.cs.columbia.edu > https://lists.cs.columbia.edu/cucslists/listinfo/kvmarm ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] arm64: KVM: Increase max VCPUs per-Guest to 8 2013-09-14 11:58 ` Andrew Jones @ 2013-09-14 12:13 ` Marc Zyngier 2013-09-14 12:36 ` Andrew Jones 0 siblings, 1 reply; 6+ messages in thread From: Marc Zyngier @ 2013-09-14 12:13 UTC (permalink / raw) To: linux-arm-kernel On 2013-09-14 12:58, Andrew Jones wrote: > On Fri, Sep 13, 2013 at 01:46:59PM +0100, Marc Zyngier wrote: >> On 11/09/13 14:02, Anup Patel wrote: >> > Current max VCPUs per-Guest is set to 4 which is preventing >> > us from creating a Guest (or VM) with 8 VCPUs on Host (e.g. >> > X-Gene Storm SOC) with 8 Host CPUs. >> > >> > The correct value of max VCPUs per-Guest should be same as >> > the max CPUs supported by GICv2 which is 8 hence this patch >> > increases KVM_MAX_VCPUS to 8. >> >> If anything, please make it configurable just like we have on 32bit. >> No >> reason to impose the extra overhead on everyone. > > What type of overhead are we talking about? Memory, right? as Memory indeed. > kvm_for_each_vcpu is almost always used when iterating. But Anup says > in > his v2 of this patch "can make things slower". If it's memory, then > is so > much consumed by each vcpu that we shouldn't always set KVM_MAX_VCPUS Not only. See how the GIC emulation also has per-VCPU data, and this results in potentially huge data structures. I have plans to address this in the future though. > to at least the highest number that current hardware supports? > Particularly > for aarch64 I think we should always be considering multi-platform > with the > kernel configs. What do you mean by multiplatform? This constant has nothing to do with being multiplatform, and the initial commit message was quite misleading in this respect. You can perfectly have 8 VCPUs on a single CPU host, and nothing so far impacts multiplatform. The limit of 8 VCPUs has to do with a GICv2 limitation, which we emulate for the guest. Once we'll have GICv3 support in the kernel, this limit will be lifted. M. -- Fast, cheap, reliable. Pick two. ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] arm64: KVM: Increase max VCPUs per-Guest to 8 2013-09-14 12:13 ` Marc Zyngier @ 2013-09-14 12:36 ` Andrew Jones 0 siblings, 0 replies; 6+ messages in thread From: Andrew Jones @ 2013-09-14 12:36 UTC (permalink / raw) To: linux-arm-kernel On Sat, Sep 14, 2013 at 01:13:59PM +0100, Marc Zyngier wrote: > On 2013-09-14 12:58, Andrew Jones wrote: > >On Fri, Sep 13, 2013 at 01:46:59PM +0100, Marc Zyngier wrote: > >>On 11/09/13 14:02, Anup Patel wrote: > >>> Current max VCPUs per-Guest is set to 4 which is preventing > >>> us from creating a Guest (or VM) with 8 VCPUs on Host (e.g. > >>> X-Gene Storm SOC) with 8 Host CPUs. > >>> > >>> The correct value of max VCPUs per-Guest should be same as > >>> the max CPUs supported by GICv2 which is 8 hence this patch > >>> increases KVM_MAX_VCPUS to 8. > >> > >>If anything, please make it configurable just like we have on > >>32bit. No > >>reason to impose the extra overhead on everyone. > > > >What type of overhead are we talking about? Memory, right? as > > Memory indeed. > > >kvm_for_each_vcpu is almost always used when iterating. But Anup > >says in > >his v2 of this patch "can make things slower". If it's memory, > >then is so > >much consumed by each vcpu that we shouldn't always set KVM_MAX_VCPUS > > Not only. See how the GIC emulation also has per-VCPU data, and this > results in potentially huge data structures. I have plans to address > this in the future though. > > >to at least the highest number that current hardware supports? > >Particularly > >for aarch64 I think we should always be considering multi-platform > >with the > >kernel configs. > > What do you mean by multiplatform? This constant has nothing to do > with being multiplatform, and the initial commit message was quite > misleading in this respect. You can perfectly have 8 VCPUs on a > single CPU host, and nothing so far impacts multiplatform. I meant compile the kernel once, but still have it useful on multiple hosts (some with 4 cpus, some with 8...). Of course with config option that's still possible, just compile with CONFIG_KVM_MAX_VCPUS=8. So I guess this is really more of a debate about what the default should be. Considering the GIC code may be a bit of an over-consumer at the moment and 8-cpu hosts may not be that widely deployed, then maybe 4 is the better default right now? drew ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-09-14 12:36 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-09-11 13:02 [PATCH] arm64: KVM: Increase max VCPUs per-Guest to 8 Anup Patel 2013-09-13 12:46 ` Marc Zyngier 2013-09-14 8:51 ` Andrew Jones 2013-09-14 11:58 ` Andrew Jones 2013-09-14 12:13 ` Marc Zyngier 2013-09-14 12:36 ` Andrew Jones
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).