From: csd@broadcom.com (Christian Daudt)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] ARM: bcm: Add DEBUG_LL console support
Date: Tue, 17 Sep 2013 17:05:11 -0700 [thread overview]
Message-ID: <1379462711-6957-1-git-send-email-csd@broadcom.com> (raw)
This patch adds low level debug uart support to Broadcom
mobile based SOCs.
Signed-off-by: Christian Daudt <csd@broadcom.com>
Changes from V1:
- Switched to use the common 8250 debug introduced in 3.12-rc1
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 9762c84..0523e71 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -94,6 +94,17 @@ choice
depends on ARCH_BCM2835
select DEBUG_UART_PL01X
+ config DEBUG_BCM_KONA_UART
+ bool "Kernel low-level debugging messages via BCM KONA UART"
+ depends on ARCH_BCM
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Broadcom SoC platforms.
+ This low level debug works for Broadcom
+ mobile SoCs in the Kona family of chips (e.g. bcm28155,
+ bcm11351, etc...)
+
config DEBUG_CLPS711X_UART1
bool "Kernel low-level debugging messages via UART1"
depends on ARCH_CLPS711X
@@ -980,6 +991,7 @@ config DEBUG_UART_PHYS
default 0xffd82340 if ARCH_IOP13XX
default 0xfff36000 if DEBUG_HIGHBANK_UART
default 0xfffff700 if ARCH_IOP33X
+ default 0x3e000000 if DEBUG_BCM_KONA_UART
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_UART_8250 || DEBUG_UART_PL01X
@@ -1035,6 +1047,7 @@ config DEBUG_UART_VIRT
default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
default 0xfefff700 if ARCH_IOP33X
default 0xff003000 if DEBUG_U300_UART
+ default 0xfe300000 if DEBUG_BCM_KONA_UART
default DEBUG_UART_PHYS if !MMU
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_UART_8250 || DEBUG_UART_PL01X
@@ -1052,7 +1065,8 @@ config DEBUG_UART_8250_WORD
default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \
ARCH_KEYSTONE || \
DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
- DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1
+ DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_DAVINCI_TNETV107X_UART1 || \
+ DEBUG_BCM_KONA_UART
config DEBUG_UART_8250_FLOW_CONTROL
bool "Enable flow control for 8250 UART"
diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig
index 6e49310..5c12c4c 100644
--- a/arch/arm/configs/bcm_defconfig
+++ b/arch/arm/configs/bcm_defconfig
@@ -30,6 +30,8 @@ CONFIG_ARCH_BCM=y
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_ERRATA_743622=y
CONFIG_PREEMPT=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_BCM_KONA_UART=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
# CONFIG_COMPACTION is not set
--
1.7.10.4
next reply other threads:[~2013-09-18 0:05 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-18 0:05 Christian Daudt [this message]
2013-10-03 6:22 ` [PATCH v2] ARM: bcm: Add DEBUG_LL console support Christian Daudt
2013-10-03 7:21 ` Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1379462711-6957-1-git-send-email-csd@broadcom.com \
--to=csd@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).