From: josh.wu@atmel.com (Josh Wu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/2] mtd: atmel_nand: remove #if defined(CONFIG_OF) around OF-specific code
Date: Wed, 18 Sep 2013 11:31:19 +0800 [thread overview]
Message-ID: <1379475080-14984-1-git-send-email-josh.wu@atmel.com> (raw)
Since the of specific code are declared in <linux/of_mtd.h> regardless
of CONFIG_OF. Remove the #if defined(CONFIG_OF) guard and use an
IS_ENABLED(CONFIG_OF) instead.
Thanks to Ezequiel Garcia's for this protype.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
---
v1 --> v2:
add an IS_ENABLED(CONFIG_OF) to guard the code for dt node parsing.
drivers/mtd/nand/atmel_nand.c | 17 +++--------------
1 file changed, 3 insertions(+), 14 deletions(-)
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 060feea..72c2611 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -1449,7 +1449,6 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
}
-#if defined(CONFIG_OF)
static int atmel_of_init_port(struct atmel_nand_host *host,
struct device_node *np)
{
@@ -1457,7 +1456,7 @@ static int atmel_of_init_port(struct atmel_nand_host *host,
u32 offset[2];
int ecc_mode;
struct atmel_nand_data *board = &host->board;
- enum of_gpio_flags flags;
+ enum of_gpio_flags flags = 0;
if (of_property_read_u32(np, "atmel,nand-addr-offset", &val) == 0) {
if (val >= 32) {
@@ -1540,13 +1539,6 @@ static int atmel_of_init_port(struct atmel_nand_host *host,
return 0;
}
-#else
-static int atmel_of_init_port(struct atmel_nand_host *host,
- struct device_node *np)
-{
- return -EINVAL;
-}
-#endif
static int __init atmel_hw_nand_init_params(struct platform_device *pdev,
struct atmel_nand_host *host)
@@ -2019,7 +2011,8 @@ static int __init atmel_nand_probe(struct platform_device *pdev)
mtd = &host->mtd;
nand_chip = &host->nand_chip;
host->dev = &pdev->dev;
- if (pdev->dev.of_node) {
+ if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
+ /* Only when CONFIG_OF is enabled of_node can be parsed */
res = atmel_of_init_port(host, pdev->dev.of_node);
if (res)
goto err_nand_ioremap;
@@ -2207,14 +2200,12 @@ static int __exit atmel_nand_remove(struct platform_device *pdev)
return 0;
}
-#if defined(CONFIG_OF)
static const struct of_device_id atmel_nand_dt_ids[] = {
{ .compatible = "atmel,at91rm9200-nand" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, atmel_nand_dt_ids);
-#endif
static int atmel_nand_nfc_probe(struct platform_device *pdev)
{
@@ -2253,12 +2244,10 @@ static int atmel_nand_nfc_probe(struct platform_device *pdev)
return 0;
}
-#if defined(CONFIG_OF)
static struct of_device_id atmel_nand_nfc_match[] = {
{ .compatible = "atmel,sama5d3-nfc" },
{ /* sentinel */ }
};
-#endif
static struct platform_driver atmel_nand_nfc_driver = {
.driver = {
--
1.7.9.5
next reply other threads:[~2013-09-18 3:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-18 3:31 Josh Wu [this message]
2013-09-18 3:31 ` [PATCH v2 2/2] mtd: atmel_nand: add MODULE_DEVICE_TABLE for nfc driver Josh Wu
2013-09-18 21:45 ` [PATCH v2 1/2] mtd: atmel_nand: remove #if defined(CONFIG_OF) around OF-specific code Brian Norris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1379475080-14984-1-git-send-email-josh.wu@atmel.com \
--to=josh.wu@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).