From mboxrd@z Thu Jan 1 00:00:00 1970 From: rogerq@ti.com (Roger Quadros) Date: Wed, 18 Sep 2013 15:48:57 +0300 Subject: [PATCH v7 05/10] usb: musb: omap2430: Don't use omap_get_control_dev() In-Reply-To: <1379508542-22389-1-git-send-email-rogerq@ti.com> References: <1379508542-22389-1-git-send-email-rogerq@ti.com> Message-ID: <1379508542-22389-6-git-send-email-rogerq@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org omap_get_control_dev() is being deprecated as it doesn't support multiple instances. As control device is present only from OMAP4 onwards which supports DT only, we use phandles to get the reference to the control device. Also get rid of "ti,has-mailbox" property as it is redundant and we can determine that from whether "ctrl-module" property is present or not. Get rid of has_mailbox from musb_hdrc_platform_data as well. Signed-off-by: Roger Quadros --- Documentation/devicetree/bindings/usb/omap-usb.txt | 4 --- drivers/usb/musb/omap2430.c | 25 +++++++++++-------- include/linux/usb/musb.h | 2 - 3 files changed, 14 insertions(+), 17 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 6d8ab9c..f67573c 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -3,9 +3,6 @@ OMAP GLUE AND OTHER OMAP SPECIFIC COMPONENTS OMAP MUSB GLUE - compatible : Should be "ti,omap4-musb" or "ti,omap3-musb" - ti,hwmods : must be "usb_otg_hs" - - ti,has-mailbox : to specify that omap uses an external mailbox - (in control module) to communicate with the musb core during device connect - and disconnect. - multipoint : Should be "1" indicating the musb controller supports multipoint. This is a MUSB configuration-specific setting. - num-eps : Specifies the number of endpoints. This is also a @@ -28,7 +25,6 @@ SOC specific device node entry usb_otg_hs: usb_otg_hs at 4a0ab000 { compatible = "ti,omap4-musb"; ti,hwmods = "usb_otg_hs"; - ti,has-mailbox; multipoint = <1>; num-eps = <16>; ram-bits = <12>; diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 59d2245..4512a05 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -38,6 +38,7 @@ #include #include #include +#include #include "musb_core.h" #include "omap2430.h" @@ -509,8 +510,12 @@ static int omap2430_probe(struct platform_device *pdev) glue->dev = &pdev->dev; glue->musb = musb; glue->status = OMAP_MUSB_UNKNOWN; + glue->control_otghs = ERR_PTR(-ENODEV); if (np) { + struct device_node *control_node; + struct platform_device *control_pdev; + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) { dev_err(&pdev->dev, @@ -539,22 +544,20 @@ static int omap2430_probe(struct platform_device *pdev) of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits); of_property_read_u32(np, "power", (u32 *)&pdata->power); config->multipoint = of_property_read_bool(np, "multipoint"); - pdata->has_mailbox = of_property_read_bool(np, - "ti,has-mailbox"); pdata->board_data = data; pdata->config = config; - } - if (pdata->has_mailbox) { - glue->control_otghs = omap_get_control_dev(); - if (IS_ERR(glue->control_otghs)) { - dev_vdbg(&pdev->dev, "Failed to get control device\n"); - ret = PTR_ERR(glue->control_otghs); - goto err2; + control_node = of_parse_phandle(np, "ctrl-module", 0); + if (control_node) { + control_pdev = of_find_device_by_node(control_node); + if (!control_pdev) { + dev_err(&pdev->dev, "Failed to get control device\n"); + ret = -EINVAL; + goto err2; + } + glue->control_otghs = &control_pdev->dev; } - } else { - glue->control_otghs = ERR_PTR(-ENODEV); } pdata->platform_ops = &omap2430_ops; diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index 053c268..eb50525 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -99,8 +99,6 @@ struct musb_hdrc_platform_data { /* MUSB_HOST, MUSB_PERIPHERAL, or MUSB_OTG */ u8 mode; - u8 has_mailbox:1; - /* for clk_get() */ const char *clock; -- 1.7.4.1