From: manjunath.goudar@linaro.org (Manjunath Goudar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V5 8/9] USB: OHCI: make ohci-ep93xx a separate driver
Date: Sat, 21 Sep 2013 16:38:45 +0530 [thread overview]
Message-ID: <1379761727-10656-9-git-send-email-manjunath.goudar@linaro.org> (raw)
In-Reply-To: <1379761727-10656-1-git-send-email-manjunath.goudar@linaro.org>
Separate the OHCI EP93XX host controller driver from ohci-hcd
host code so that it can be built as a separate driver module.
This work is part of enabling multi-platform kernels on ARM.
Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro.org>
Signed-off-by: Deepak Saxena <dsaxena@linaro.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg KH <greg@kroah.com>
Cc: linux-usb at vger.kernel.org
V2->V3:
-Unused *ohci variable has been removed.
V1->V2:
-ohci_hcd_init() statements are removed,
because by default it is called in ohci_setup().
---
drivers/usb/host/Kconfig | 8 +++++
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ohci-ep93xx.c | 72 +++++++++++++++++-----------------------
drivers/usb/host/ohci-hcd.c | 18 ----------
4 files changed, 40 insertions(+), 59 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 06c0cec..8e31c98 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -398,6 +398,14 @@ config USB_OHCI_HCD_LPC32XX
Enables support for the on-chip OHCI controller on
NXP chips.
+config USB_OHCI_HCD_EP93XX
+ tristate "Support for EP93XX on-chip OHCI USB controller"
+ depends on USB_OHCI_HCD && ARCH_EP93XX
+ default y
+ ---help---
+ Enables support for the on-chip OHCI controller on
+ EP93XX chips.
+
config USB_OHCI_HCD_AT91
tristate "Support for Atmel on-chip OHCI USB controller"
depends on USB_OHCI_HCD && ARCH_AT91
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 30a632c..02f9cd2 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -53,6 +53,7 @@ obj-$(CONFIG_USB_OHCI_HCD_SPEAR) += ohci-spear.o
obj-$(CONFIG_USB_OHCI_HCD_AT91) += ohci-at91.o
obj-$(CONFIG_USB_OHCI_HCD_S3C2410) += ohci-s3c2410.o
obj-$(CONFIG_USB_OHCI_HCD_LPC32XX) += ohci-nxp.o
+obj-$(CONFIG_USB_OHCI_HCD_EP93XX) += ohci-ep93xx.o
obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o
obj-$(CONFIG_USB_FHCI_HCD) += fhci.o
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index 84a20d5..492f681 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -25,50 +25,23 @@
#include <linux/clk.h>
#include <linux/device.h>
-#include <linux/signal.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/signal.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
-static struct clk *usb_host_clock;
+#include "ohci.h"
-static int ohci_ep93xx_start(struct usb_hcd *hcd)
-{
- struct ohci_hcd *ohci = hcd_to_ohci(hcd);
- int ret;
+#define DRIVER_DESC "OHCI EP93xx driver"
- if ((ret = ohci_init(ohci)) < 0)
- return ret;
+static const char hcd_name[] = "ohci-ep93xx";
- if ((ret = ohci_run(ohci)) < 0) {
- dev_err(hcd->self.controller, "can't start %s\n",
- hcd->self.bus_name);
- ohci_stop(hcd);
- return ret;
- }
+static struct hc_driver __read_mostly ohci_ep93xx_hc_driver;
- return 0;
-}
-
-static struct hc_driver ohci_ep93xx_hc_driver = {
- .description = hcd_name,
- .product_desc = "EP93xx OHCI",
- .hcd_priv_size = sizeof(struct ohci_hcd),
- .irq = ohci_irq,
- .flags = HCD_USB11 | HCD_MEMORY,
- .start = ohci_ep93xx_start,
- .stop = ohci_stop,
- .shutdown = ohci_shutdown,
- .urb_enqueue = ohci_urb_enqueue,
- .urb_dequeue = ohci_urb_dequeue,
- .endpoint_disable = ohci_endpoint_disable,
- .get_frame_number = ohci_get_frame,
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
-#ifdef CONFIG_PM
- .bus_suspend = ohci_bus_suspend,
- .bus_resume = ohci_bus_resume,
-#endif
- .start_port_reset = ohci_start_port_reset,
-};
+static struct clk *usb_host_clock;
static int ohci_hcd_ep93xx_drv_probe(struct platform_device *pdev)
{
@@ -109,8 +82,6 @@ static int ohci_hcd_ep93xx_drv_probe(struct platform_device *pdev)
clk_enable(usb_host_clock);
- ohci_hcd_init(hcd_to_ohci(hcd));
-
ret = usb_add_hcd(hcd, irq, 0);
if (ret)
goto err_clk_disable;
@@ -166,7 +137,6 @@ static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev)
}
#endif
-
static struct platform_driver ohci_hcd_ep93xx_driver = {
.probe = ohci_hcd_ep93xx_drv_probe,
.remove = ohci_hcd_ep93xx_drv_remove,
@@ -181,4 +151,24 @@ static struct platform_driver ohci_hcd_ep93xx_driver = {
},
};
+static int __init ohci_ep93xx_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+ ohci_init_driver(&ohci_ep93xx_hc_driver, NULL);
+ return platform_driver_register(&ohci_hcd_ep93xx_driver);
+}
+module_init(ohci_ep93xx_init);
+
+static void __exit ohci_ep93xx_cleanup(void)
+{
+ platform_driver_unregister(&ohci_hcd_ep93xx_driver);
+}
+module_exit(ohci_ep93xx_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:ep93xx-ohci");
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index c515192..2ee3171 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1182,11 +1182,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ohci_hcd_pxa27x_driver
#endif
-#ifdef CONFIG_ARCH_EP93XX
-#include "ohci-ep93xx.c"
-#define EP93XX_PLATFORM_DRIVER ohci_hcd_ep93xx_driver
-#endif
-
#ifdef CONFIG_ARCH_DAVINCI_DA8XX
#include "ohci-da8xx.c"
#define DAVINCI_PLATFORM_DRIVER ohci_hcd_da8xx_driver
@@ -1283,12 +1278,6 @@ static int __init ohci_hcd_mod_init(void)
goto error_tmio;
#endif
-#ifdef EP93XX_PLATFORM_DRIVER
- retval = platform_driver_register(&EP93XX_PLATFORM_DRIVER);
- if (retval < 0)
- goto error_ep93xx;
-#endif
-
#ifdef DAVINCI_PLATFORM_DRIVER
retval = platform_driver_register(&DAVINCI_PLATFORM_DRIVER);
if (retval < 0)
@@ -1302,10 +1291,6 @@ static int __init ohci_hcd_mod_init(void)
platform_driver_unregister(&DAVINCI_PLATFORM_DRIVER);
error_davinci:
#endif
-#ifdef EP93XX_PLATFORM_DRIVER
- platform_driver_unregister(&EP93XX_PLATFORM_DRIVER);
- error_ep93xx:
-#endif
#ifdef TMIO_OHCI_DRIVER
platform_driver_unregister(&TMIO_OHCI_DRIVER);
error_tmio:
@@ -1346,9 +1331,6 @@ static void __exit ohci_hcd_mod_exit(void)
#ifdef DAVINCI_PLATFORM_DRIVER
platform_driver_unregister(&DAVINCI_PLATFORM_DRIVER);
#endif
-#ifdef EP93XX_PLATFORM_DRIVER
- platform_driver_unregister(&EP93XX_PLATFORM_DRIVER);
-#endif
#ifdef TMIO_OHCI_DRIVER
platform_driver_unregister(&TMIO_OHCI_DRIVER);
#endif
--
1.7.9.5
next prev parent reply other threads:[~2013-09-21 11:08 UTC|newest]
Thread overview: 110+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-07 6:03 [RFC][PATCH 0/7] USB: OHCI: more bus glues as separate modules Manjunath Goudar
2013-06-07 6:03 ` [RFC][PATCH 1/7] USB: OHCI: make ohci-exynos a separate driver Manjunath Goudar
2013-06-07 13:49 ` Arnd Bergmann
2013-06-07 17:20 ` Alan Stern
2013-06-07 6:03 ` [RFC][PATCH 2/7] USB: OHCI: make ohci-omap " Manjunath Goudar
2013-06-07 17:37 ` Alan Stern
2013-06-07 6:03 ` [RFC][PATCH 3/7] USB: OHCI: make ohci-omap3 " Manjunath Goudar
2013-06-07 13:51 ` Arnd Bergmann
2013-06-07 17:49 ` Alan Stern
2013-06-07 6:03 ` [RFC][PATCH 4/7] USB: OHCI: make ohci-spear " Manjunath Goudar
2013-06-07 10:30 ` Viresh Kumar
2013-06-07 18:34 ` Alan Stern
2013-06-07 6:03 ` [RFC][PATCH 5/7] USB: OHCI: export ohci_hub_control and ohci_hub_status_data Manjunath Goudar
2013-06-07 18:42 ` Alan Stern
2013-06-07 6:03 ` [RFC][PATCH 6/7] USB: OHCI: make ohci-at91 a separate driver Manjunath Goudar
2013-06-07 18:52 ` Alan Stern
2013-06-07 6:03 ` [RFC][PATCH 7/7] USB: OHCI: make ohci-s3c2410 " Manjunath Goudar
2013-06-07 13:56 ` Arnd Bergmann
2013-06-07 18:54 ` Alan Stern
2013-06-12 15:53 ` [PATCH V2 0/6] USB: OHCI: more bus glues as separate modules Manjunath Goudar
2013-06-12 15:53 ` [PATCH V2 1/6] USB: OHCI: make ohci-exynos a separate driver Manjunath Goudar
2013-06-18 17:30 ` Alan Stern
2013-06-20 4:10 ` Jingoo Han
2013-06-12 15:53 ` [PATCH V2 2/6] USB: OHCI: make ohci-omap " Manjunath Goudar
2013-06-18 17:47 ` Alan Stern
2013-06-18 18:13 ` Alan Stern
2013-06-12 15:53 ` [PATCH V2 3/6] USB: OHCI: make ohci-omap3 " Manjunath Goudar
2013-06-18 18:16 ` Alan Stern
2013-06-12 15:54 ` [PATCH V2 4/6] USB: OHCI: make ohci-spear " Manjunath Goudar
2013-06-18 18:23 ` Alan Stern
2013-06-12 15:54 ` [PATCH V2 5/6] USB: OHCI: make ohci-at91 " Manjunath Goudar
2013-06-19 20:16 ` Alan Stern
2013-06-12 15:54 ` [PATCH V2 6/6] USB: OHCI: make ohci-s3c2410 " Manjunath Goudar
2013-06-19 20:38 ` Alan Stern
2013-06-25 6:23 ` [PATCH V3 0/6] USB: OHCI: more bus glues as separate modules Manjunath Goudar
2013-06-25 6:23 ` [PATCH V3 1/6] USB: OHCI: make ohci-exynos a separate driver Manjunath Goudar
2013-06-25 6:23 ` [PATCH V3 2/6] USB: OHCI: make ohci-omap " Manjunath Goudar
2013-07-18 15:50 ` Alan Stern
2013-06-25 6:23 ` [PATCH V3 3/6] USB: OHCI: make ohci-omap3 " Manjunath Goudar
2013-06-25 18:14 ` Alan Stern
2013-06-25 6:23 ` [PATCH V3 4/6] USB: OHCI: make ohci-spear " Manjunath Goudar
2013-06-25 6:23 ` [PATCH V3 5/6] USB: OHCI: make ohci-at91 " Manjunath Goudar
2013-07-18 20:51 ` Alan Stern
2013-06-25 6:23 ` [PATCH V3 6/6] USB: OHCI: make ohci-s3c2410 " Manjunath Goudar
2013-07-18 20:38 ` Alan Stern
2013-07-22 9:19 ` [PATCH 0/6] USB: OHCI: more bus glues as separate modules Manjunath Goudar
2013-07-22 9:19 ` [PATCH 1/6] USB: OHCI: make ohci-exynos a separate driver Manjunath Goudar
2013-07-22 9:19 ` [PATCH 2/6] USB: OHCI: make ohci-omap " Manjunath Goudar
2013-07-23 18:39 ` Alan Stern
2013-07-22 9:19 ` [PATCH 3/6] USB: OHCI: make ohci-omap3 " Manjunath Goudar
2013-07-23 18:43 ` Alan Stern
2013-07-22 9:19 ` [PATCH 4/6] USB: OHCI: make ohci-spear " Manjunath Goudar
2013-07-22 9:19 ` [PATCH 5/6] USB: OHCI: make ohci-at91 " Manjunath Goudar
2013-07-23 18:45 ` Alan Stern
2013-07-22 9:19 ` [PATCH 6/6] USB: OHCI: make ohci-s3c2410 " Manjunath Goudar
2013-07-23 8:23 ` Tomasz Figa
2013-07-22 9:41 ` [PATCH V4 0/6] USB: OHCI: more bus glues as separate modules manjunath
2013-07-31 6:07 ` Manjunath Goudar
2013-07-31 6:07 ` [PATCH V4 1/6] USB: OHCI: make ohci-exynos a separate driver Manjunath Goudar
2013-07-31 6:08 ` [PATCH V4 2/6] USB: OHCI: make ohci-omap " Manjunath Goudar
2013-07-31 6:08 ` [PATCH V4 3/6] USB: OHCI: make ohci-omap3 " Manjunath Goudar
2013-07-31 6:08 ` [PATCH V4 4/6] USB: OHCI: make ohci-spear " Manjunath Goudar
2013-07-31 6:08 ` [PATCH V4 5/6] USB: OHCI: make ohci-at91 " Manjunath Goudar
2013-07-31 6:08 ` [PATCH V4 6/6] USB: OHCI: make ohci-s3c2410 " Manjunath Goudar
2013-08-10 7:37 ` [PATCH V4 0/6] USB: OHCI: more bus glues as separate modules Manjunath Goudar
2013-08-10 7:37 ` [PATCH V4 1/6] USB: OHCI: make ohci-exynos a separate driver Manjunath Goudar
2013-08-10 7:37 ` [PATCH V4 2/6] USB: OHCI: make ohci-omap " Manjunath Goudar
2013-08-10 7:37 ` [PATCH V4 3/6] USB: OHCI: make ohci-omap3 " Manjunath Goudar
2013-08-10 7:37 ` [PATCH V4 4/6] USB: OHCI: make ohci-spear " Manjunath Goudar
2013-08-10 7:37 ` [PATCH V4 5/6] USB: OHCI: make ohci-at91 " Manjunath Goudar
2013-08-10 7:37 ` [PATCH V4 6/6] USB: OHCI: make ohci-s3c2410 " Manjunath Goudar
2013-08-10 10:53 ` Tomasz Figa
2013-08-12 6:46 ` [PATCH V5 0/6]USB: OHCI: more bus glues as separate modules Manjunath Goudar
2013-08-12 6:46 ` [PATCH V5 1/6] USB: OHCI: make ohci-exynos a separate driver Manjunath Goudar
2013-08-12 6:46 ` [PATCH V5 2/6] USB: OHCI: make ohci-omap " Manjunath Goudar
2013-08-12 6:46 ` [PATCH V5 3/6] USB: OHCI: make ohci-omap3 " Manjunath Goudar
2013-08-12 6:46 ` [PATCH V5 4/6] USB: OHCI: make ohci-spear " Manjunath Goudar
2013-08-12 6:56 ` Viresh Kumar
2013-08-12 20:20 ` Greg KH
2013-08-12 6:46 ` [PATCH V5 5/6] USB: OHCI: make ohci-at91 " Manjunath Goudar
2013-08-12 6:47 ` [PATCH V5 6/6] USB: OHCI: make ohci-s3c2410 " Manjunath Goudar
2013-08-17 13:21 ` Tomasz Figa
2013-08-12 6:54 ` [PATCH V5 0/6]USB: OHCI: more bus glues as separate modules Viresh Kumar
2013-09-16 10:10 ` [PATCH V5 0/9] USB: " Manjunath Goudar
2013-09-16 10:10 ` [PATCH V5 1/9] USB: OHCI: make ohci-exynos a separate driver Manjunath Goudar
2013-09-16 10:10 ` [PATCH V5 2/9] USB: OHCI: make ohci-omap " Manjunath Goudar
2013-09-16 10:10 ` [PATCH V5 3/9] USB: OHCI: make ohci-omap3 " Manjunath Goudar
2013-09-16 10:10 ` [PATCH V5 4/9] USB: OHCI: make ohci-spear " Manjunath Goudar
2013-09-16 10:10 ` [PATCH V5 5/9] USB: OHCI: make ohci-at91 " Manjunath Goudar
2013-09-16 10:10 ` [PATCH V5 6/9] USB: OHCI: make ohci-s3c2410 " Manjunath Goudar
2013-09-16 10:10 ` [PATCH V5 7/9] USB: OHCI: make ohci-nxp " Manjunath Goudar
2013-09-16 10:10 ` [PATCH V5 8/9] USB: OHCI: make ohci-ep93xx " Manjunath Goudar
2013-09-16 10:10 ` [PATCH V5 9/9] USB: OHCI: make ohci-pxa27x " Manjunath Goudar
2013-09-21 11:08 ` [PATCH V5 0/9] USB: OHCI: more bus glues as separate modules Manjunath Goudar
2013-09-21 11:08 ` [PATCH V5 1/9] USB: OHCI: make ohci-exynos a separate driver Manjunath Goudar
2013-09-26 16:50 ` Greg KH
2013-09-21 11:08 ` [PATCH V5 2/9] USB: OHCI: make ohci-omap " Manjunath Goudar
2013-09-21 11:08 ` [PATCH V5 3/9] USB: OHCI: make ohci-omap3 " Manjunath Goudar
2013-09-21 11:08 ` [PATCH V5 4/9] USB: OHCI: make ohci-spear " Manjunath Goudar
2013-09-21 11:08 ` [PATCH V5 5/9] USB: OHCI: make ohci-at91 " Manjunath Goudar
2013-09-23 12:22 ` Nicolas Ferre
2013-09-27 15:10 ` Kevin Hilman
2013-09-27 15:25 ` Greg KH
2013-09-27 15:37 ` Alan Stern
2013-09-27 15:40 ` Greg KH
2013-09-27 15:38 ` Alan Stern
2013-09-21 11:08 ` [PATCH V5 6/9] USB: OHCI: make ohci-s3c2410 " Manjunath Goudar
2013-09-21 11:08 ` [PATCH V5 7/9] USB: OHCI: make ohci-nxp " Manjunath Goudar
2013-09-21 11:08 ` Manjunath Goudar [this message]
2013-09-21 11:08 ` [PATCH V5 9/9] USB: OHCI: make ohci-pxa27x " Manjunath Goudar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1379761727-10656-9-git-send-email-manjunath.goudar@linaro.org \
--to=manjunath.goudar@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).