From: shawn.guo@linaro.org (Shawn Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/5] ARM: imx6: report soc info via soc device
Date: Wed, 25 Sep 2013 16:30:23 +0800 [thread overview]
Message-ID: <1380097823-29027-6-git-send-email-shawn.guo@linaro.org> (raw)
In-Reply-To: <1380097823-29027-1-git-send-email-shawn.guo@linaro.org>
The patch enables soc bus infrastructure and adds a function
imx_soc_device_init() to report soc info via soc device interface for
imx6qdl and imx6sl. With the support, user space can get soc related
info by looking at sysfs like below.
$ cat /sys/devices/soc0/machine
Freescale i.MX6 Quad SABRE Smart Device Board
$ cat /sys/devices/soc0/family
Freescale i.MX
$ cat /sys/devices/soc0/soc_id
i.MX6Q
$ cat /sys/devices/soc0/revision
1.2
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/mach-imx/Kconfig | 1 +
arch/arm/mach-imx/common.h | 1 +
arch/arm/mach-imx/cpu.c | 81 +++++++++++++++++++++++++++++++++++++++
arch/arm/mach-imx/mach-imx6q.c | 8 +++-
arch/arm/mach-imx/mach-imx6sl.c | 8 +++-
arch/arm/mach-imx/mxc.h | 1 +
6 files changed, 98 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 9f67338..e017915 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -11,6 +11,7 @@ config ARCH_MXC
select GENERIC_IRQ_CHIP
select MIGHT_HAVE_CACHE_L2X0 if ARCH_MULTI_V6_V7
select MULTI_IRQ_HANDLER
+ select SOC_BUS
select SPARSE_IRQ
select USE_OF
help
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index 282af93..4f9aea9 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -83,6 +83,7 @@ extern int mxc_device_init(void);
void imx_set_soc_revision(unsigned int rev);
unsigned int imx_get_soc_revision(void);
void imx_init_revision_from_anatop(void);
+struct device *imx_soc_device_init(void);
enum mxc_cpu_pwr_mode {
WAIT_CLOCKED, /* wfi only */
diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c
index 51f6c51..fae2c9a 100644
--- a/arch/arm/mach-imx/cpu.c
+++ b/arch/arm/mach-imx/cpu.c
@@ -1,6 +1,9 @@
#include <linux/module.h>
#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
#include "hardware.h"
#include "common.h"
@@ -56,3 +59,81 @@ void __init imx_set_aips(void __iomem *base)
reg = __raw_readl(base + 0x50) & 0x00FFFFFF;
__raw_writel(reg, base + 0x50);
}
+
+struct device * __init imx_soc_device_init(void)
+{
+ struct soc_device_attribute *soc_dev_attr;
+ struct soc_device *soc_dev;
+ struct device_node *root;
+ const char *soc_id;
+ int ret;
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return NULL;
+
+ soc_dev_attr->family = "Freescale i.MX";
+
+ root = of_find_node_by_path("/");
+ ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
+ of_node_put(root);
+ if (ret)
+ goto free_soc;
+
+ switch (__mxc_cpu_type) {
+ case MXC_CPU_MX1:
+ soc_id = "i.MX1";
+ break;
+ case MXC_CPU_MX21:
+ soc_id = "i.MX21";
+ break;
+ case MXC_CPU_MX25:
+ soc_id = "i.MX25";
+ break;
+ case MXC_CPU_MX27:
+ soc_id = "i.MX27";
+ break;
+ case MXC_CPU_MX31:
+ soc_id = "i.MX31";
+ break;
+ case MXC_CPU_MX35:
+ soc_id = "i.MX35";
+ break;
+ case MXC_CPU_MX51:
+ soc_id = "i.MX51";
+ break;
+ case MXC_CPU_MX53:
+ soc_id = "i.MX53";
+ break;
+ case MXC_CPU_IMX6SL:
+ soc_id = "i.MX6SL";
+ break;
+ case MXC_CPU_IMX6DL:
+ soc_id = "i.MX6DL";
+ break;
+ case MXC_CPU_IMX6Q:
+ soc_id = "i.MX6Q";
+ break;
+ default:
+ soc_id = "Unknown";
+ }
+ soc_dev_attr->soc_id = soc_id;
+
+ soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%d.%d",
+ (imx_soc_revision >> 4) & 0xf,
+ imx_soc_revision & 0xf);
+ if (!soc_dev_attr->revision)
+ goto free_soc;
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev))
+ goto free_rev;
+
+ return soc_device_to_device(soc_dev);
+
+free_rev:
+ kfree(soc_dev_attr->revision);
+free_soc:
+ kfree(soc_dev_attr);
+ return NULL;
+}
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index ea01ac3..ebcfd8d 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -164,9 +164,15 @@ static void __init imx6q_1588_init(void)
static void __init imx6q_init_machine(void)
{
+ struct device *parent;
+
+ parent = imx_soc_device_init();
+ if (parent == NULL)
+ pr_warn("failed to initialize soc device\n");
+
imx6q_enet_phy_init();
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
imx_anatop_init();
imx6q_pm_init();
diff --git a/arch/arm/mach-imx/mach-imx6sl.c b/arch/arm/mach-imx/mach-imx6sl.c
index b1aaa47..5c767f0 100644
--- a/arch/arm/mach-imx/mach-imx6sl.c
+++ b/arch/arm/mach-imx/mach-imx6sl.c
@@ -37,9 +37,15 @@ static void __init imx6sl_fec_init(void)
static void __init imx6sl_init_machine(void)
{
+ struct device *parent;
+
mxc_arch_reset_init_dt();
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ parent = imx_soc_device_init();
+ if (parent == NULL)
+ pr_warn("failed to initialize soc device\n");
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
imx6sl_fec_init();
}
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index 8629e5b..99e03ea 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -34,6 +34,7 @@
#define MXC_CPU_MX35 35
#define MXC_CPU_MX51 51
#define MXC_CPU_MX53 53
+#define MXC_CPU_IMX6SL 0x60
#define MXC_CPU_IMX6DL 0x61
#define MXC_CPU_IMX6Q 0x63
--
1.7.9.5
prev parent reply other threads:[~2013-09-25 8:30 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-25 8:30 [PATCH 0/5] ARM: imx6: export soc info via soc device Shawn Guo
2013-09-25 8:30 ` [PATCH 1/5] ARM: imx: add soc revision helper functions Shawn Guo
2013-09-25 8:30 ` [PATCH 2/5] ARM: imx6q: use common soc revision helpers Shawn Guo
2013-09-25 8:30 ` [PATCH 3/5] ARM: imx: add a common function to initialize revision from anatop Shawn Guo
2013-09-25 8:30 ` [PATCH 4/5] ARM: imx: use imx_init_revision_from_anatop() on imx6sl Shawn Guo
2013-09-25 8:30 ` Shawn Guo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1380097823-29027-6-git-send-email-shawn.guo@linaro.org \
--to=shawn.guo@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).