From mboxrd@z Thu Jan 1 00:00:00 1970 From: eduardo.valentin@ti.com (Eduardo Valentin) Date: Thu, 26 Sep 2013 23:13:18 -0400 Subject: [PATCHv4 11/18] arm: dts: add omap4430 thermal data In-Reply-To: <1380251605-3804-1-git-send-email-eduardo.valentin@ti.com> References: <1380251605-3804-1-git-send-email-eduardo.valentin@ti.com> Message-ID: <1380251605-3804-12-git-send-email-eduardo.valentin@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch changes the dtsi entry on omap4430 to contain the thermal data. This data will enable the passive cooling with CPUfreq cooling device at 100C and the system will do a thermal shutdown at 125C. Cc: "Beno?t Cousson" Cc: Tony Lindgren Cc: Russell King Cc: linux-omap at vger.kernel.org Cc: devicetree-discuss at lists.ozlabs.org Cc: linux-arm-kernel at lists.infradead.org Cc: linux-kernel at vger.kernel.org Signed-off-by: Eduardo Valentin --- arch/arm/boot/dts/omap443x.dtsi | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi index bcf455e..e9c97d6 100644 --- a/arch/arm/boot/dts/omap443x.dtsi +++ b/arch/arm/boot/dts/omap443x.dtsi @@ -12,7 +12,7 @@ / { cpus { - cpu at 0 { + cpu0: cpu at 0 { /* OMAP443x variants OPP50-OPPNT */ operating-points = < /* kHz uV */ @@ -25,9 +25,15 @@ }; }; - bandgap { + thermal-zones{ + #include "omap4-cpu-thermal.dtsi" + }; + + bandgap: bandgap { reg = <0x4a002260 0x4 0x4a00232C 0x4>; compatible = "ti,omap4430-bandgap"; + + #thermal-sensor-cells = <0>; }; }; -- 1.8.2.1.342.gfa7285d