From mboxrd@z Thu Jan 1 00:00:00 1970 From: eduardo.valentin@ti.com (Eduardo Valentin) Date: Thu, 26 Sep 2013 23:13:19 -0400 Subject: [PATCHv4 12/18] arm: dts: add omap4460 thermal data In-Reply-To: <1380251605-3804-1-git-send-email-eduardo.valentin@ti.com> References: <1380251605-3804-1-git-send-email-eduardo.valentin@ti.com> Message-ID: <1380251605-3804-13-git-send-email-eduardo.valentin@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch changes the dtsi entry on omap4460 to contain the thermal data. This data will enable the passive cooling with CPUfreq cooling device at 100C and the system will do a thermal shutdown at 125C. Cc: "Beno?t Cousson" Cc: Tony Lindgren Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Stephen Warren Cc: Ian Campbell Cc: Russell King Cc: linux-omap at vger.kernel.org Cc: devicetree at vger.kernel.org Cc: linux-arm-kernel at lists.infradead.org Cc: linux-kernel at vger.kernel.org Signed-off-by: Eduardo Valentin --- arch/arm/boot/dts/omap4460.dtsi | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi index c2f0f39..4d93aba 100644 --- a/arch/arm/boot/dts/omap4460.dtsi +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -12,7 +12,7 @@ / { cpus { /* OMAP446x 'standard device' variants OPP50 to OPPTurbo */ - cpu at 0 { + cpu0: cpu at 0 { operating-points = < /* kHz uV */ 350000 1025000 @@ -30,12 +30,18 @@ ti,hwmods = "debugss"; }; - bandgap { + thermal-zones{ + #include "omap4-cpu-thermal.dtsi" + }; + + bandgap: bandgap { reg = <0x4a002260 0x4 0x4a00232C 0x4 0x4a002378 0x18>; compatible = "ti,omap4460-bandgap"; interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */ gpios = <&gpio3 22 0>; /* tshut */ + + #thermal-sensor-cells = <0>; }; }; -- 1.8.2.1.342.gfa7285d