* [PATCH 1/3] ARM: dts: imx6q-sabrelite: Add ethernet phy reset pin into hog
@ 2013-09-27 14:12 Fabio Estevam
2013-09-27 14:12 ` [PATCH 2/3] ARM: dts: imx6qdl-sabresd: Provide phy-reset-gpios Fabio Estevam
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Fabio Estevam @ 2013-09-27 14:12 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@freescale.com>
MX6QDL_PAD_EIM_D23__GPIO3_IO23 pin is used to reset the ethernet phy.
Add it to the 'hog' group.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
arch/arm/boot/dts/imx6q-sabrelite.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index e1c1777..f004913 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -123,6 +123,7 @@
MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000
MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x80000000
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
>;
};
};
--
1.8.1.2
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 2/3] ARM: dts: imx6qdl-sabresd: Provide phy-reset-gpios
2013-09-27 14:12 [PATCH 1/3] ARM: dts: imx6q-sabrelite: Add ethernet phy reset pin into hog Fabio Estevam
@ 2013-09-27 14:12 ` Fabio Estevam
2013-09-27 14:12 ` [PATCH 3/3] ARM: dts: imx6qdl-wandboard: " Fabio Estevam
2013-09-29 7:39 ` [PATCH 1/3] ARM: dts: imx6q-sabrelite: Add ethernet phy reset pin into hog Shawn Guo
2 siblings, 0 replies; 4+ messages in thread
From: Fabio Estevam @ 2013-09-27 14:12 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@freescale.com>
GPIO1_25 is used to reset the ethernet phy.
Add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 64e454b..2035d66 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -108,6 +108,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_1>;
phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio1 25 0>;
status = "okay";
};
@@ -172,6 +173,7 @@
MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
>;
};
};
--
1.8.1.2
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 3/3] ARM: dts: imx6qdl-wandboard: Provide phy-reset-gpios
2013-09-27 14:12 [PATCH 1/3] ARM: dts: imx6q-sabrelite: Add ethernet phy reset pin into hog Fabio Estevam
2013-09-27 14:12 ` [PATCH 2/3] ARM: dts: imx6qdl-sabresd: Provide phy-reset-gpios Fabio Estevam
@ 2013-09-27 14:12 ` Fabio Estevam
2013-09-29 7:39 ` [PATCH 1/3] ARM: dts: imx6q-sabrelite: Add ethernet phy reset pin into hog Shawn Guo
2 siblings, 0 replies; 4+ messages in thread
From: Fabio Estevam @ 2013-09-27 14:12 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@freescale.com>
GPIO3_29 is used to reset the ethernet phy.
Add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index df42d3c..35f5479 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -88,6 +88,7 @@
MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* WL_REG_ON */
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */
MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000
>;
};
};
@@ -97,6 +98,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet_1>;
phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio3 29 0>;
status = "okay";
};
--
1.8.1.2
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH 1/3] ARM: dts: imx6q-sabrelite: Add ethernet phy reset pin into hog
2013-09-27 14:12 [PATCH 1/3] ARM: dts: imx6q-sabrelite: Add ethernet phy reset pin into hog Fabio Estevam
2013-09-27 14:12 ` [PATCH 2/3] ARM: dts: imx6qdl-sabresd: Provide phy-reset-gpios Fabio Estevam
2013-09-27 14:12 ` [PATCH 3/3] ARM: dts: imx6qdl-wandboard: " Fabio Estevam
@ 2013-09-29 7:39 ` Shawn Guo
2 siblings, 0 replies; 4+ messages in thread
From: Shawn Guo @ 2013-09-29 7:39 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Sep 27, 2013 at 11:12:40AM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> MX6QDL_PAD_EIM_D23__GPIO3_IO23 pin is used to reset the ethernet phy.
>
> Add it to the 'hog' group.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
All applied, thanks.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2013-09-29 7:39 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-09-27 14:12 [PATCH 1/3] ARM: dts: imx6q-sabrelite: Add ethernet phy reset pin into hog Fabio Estevam
2013-09-27 14:12 ` [PATCH 2/3] ARM: dts: imx6qdl-sabresd: Provide phy-reset-gpios Fabio Estevam
2013-09-27 14:12 ` [PATCH 3/3] ARM: dts: imx6qdl-wandboard: " Fabio Estevam
2013-09-29 7:39 ` [PATCH 1/3] ARM: dts: imx6q-sabrelite: Add ethernet phy reset pin into hog Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).