[PATCH 1/5] ARM: Kconfig: Move if ARCH_S3C64XX statement to mach-s3c64xx/Kconfig

[PATCH 1/5] ARM: Kconfig: Move if ARCH_S3C64XX statement to mach-s3c64xx/Kconfig

[Tomasz Figa]

All other platforms have this condition checked inside their own Kconfig
files, so for consistency this patch makes it this way for mach-s3c64xx
as well.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
---
 arch/arm/Kconfig              | 2 --
 arch/arm/mach-s3c64xx/Kconfig | 4 ++++
 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b766dad..dc51f8a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -995,9 +995,7 @@ source "arch/arm/mach-sti/Kconfig"
 
 source "arch/arm/mach-s3c24xx/Kconfig"
 
-if ARCH_S3C64XX
 source "arch/arm/mach-s3c64xx/Kconfig"
-endif
 
 source "arch/arm/mach-s5p64x0/Kconfig"
 
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index bd14e3a..0e23910 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -3,6 +3,8 @@
 #
 # Licensed under GPLv2
 
+if ARCH_S3C64XX
+
 # temporary until we can eliminate all drivers using it.
 config PLAT_S3C64XX
 	bool
@@ -322,3 +324,5 @@ config MACH_S3C64XX_DT
 	  board.
 	  Note: This is under development and not all peripherals can be
 	  supported with this machine file.
+
+endif
-- 
1.8.3.2

[PATCH 2/5] gpio: samsung: Use CONFIG_ARCH_S3C64XX to check for S3C64xx support

[Tomasz Figa]

Since CONFIG_PLAT_S3C64XX is going to be removed, this patch modifies
the gpio-samsung driver to use the proper way of checking for S3C64xx
support - CONFIG_ARCH_S3C64XX.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
---
 drivers/gpio/gpio-samsung.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index 29b5d67..76e02b9 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -1033,7 +1033,7 @@ static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset)
 }
 #endif
 
-#ifdef CONFIG_PLAT_S3C64XX
+#ifdef CONFIG_ARCH_S3C64XX
 static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin)
 {
 	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
@@ -1174,7 +1174,7 @@ struct samsung_gpio_chip s3c24xx_gpios[] = {
  */
 
 static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
-#ifdef CONFIG_PLAT_S3C64XX
+#ifdef CONFIG_ARCH_S3C64XX
 	{
 		.chip	= {
 			.base	= S3C64XX_GPA(0),
@@ -1227,7 +1227,7 @@ static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = {
 };
 
 static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
-#ifdef CONFIG_PLAT_S3C64XX
+#ifdef CONFIG_ARCH_S3C64XX
 	{
 		.base	= S3C64XX_GPH_BASE + 0x4,
 		.chip	= {
@@ -1257,7 +1257,7 @@ static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = {
 };
 
 static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = {
-#ifdef CONFIG_PLAT_S3C64XX
+#ifdef CONFIG_ARCH_S3C64XX
 	{
 		.base	= S3C64XX_GPF_BASE,
 		.config	= &samsung_gpio_cfgs[6],
-- 
1.8.3.2

[PATCH 2/5] gpio: samsung: Use CONFIG_ARCH_S3C64XX to check for S3C64xx support

[Linus Walleij]

On Sat, Sep 28, 2013 at 8:21 PM, Tomasz Figa <tomasz.figa@gmail.com> wrote:

> Since CONFIG_PLAT_S3C64XX is going to be removed, this patch modifies
> the gpio-samsung driver to use the proper way of checking for S3C64xx
> support - CONFIG_ARCH_S3C64XX.
>
> Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>

Acked-by: Linus Walleij <linus.walleij@linaro.org>

I assume that this will go through ARM SoC?

Yours,
Linus Walleij

[PATCH 2/5] gpio: samsung: Use CONFIG_ARCH_S3C64XX to check for S3C64xx support

[Tomasz Figa]

Hi Linus,

On Wednesday 02 of October 2013 12:46:51 Linus Walleij wrote:
> On Sat, Sep 28, 2013 at 8:21 PM, Tomasz Figa <tomasz.figa@gmail.com> 
wrote:
> > Since CONFIG_PLAT_S3C64XX is going to be removed, this patch modifies
> > the gpio-samsung driver to use the proper way of checking for S3C64xx
> > support - CONFIG_ARCH_S3C64XX.
> > 
> > Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
> 
> Acked-by: Linus Walleij <linus.walleij@linaro.org>

Thanks.

> I assume that this will go through ARM SoC?

I think so.

Best regards,
Tomasz

[PATCH 3/5] [media] s3c-camif: Use CONFIG_ARCH_S3C64XX to check for S3C64xx support

[Tomasz Figa]

Since CONFIG_PLAT_S3C64XX is going to be removed, this patch modifies
the Kconfig entry of s3c-camif driver to use the proper way of checking
for S3C64xx support - CONFIG_ARCH_S3C64XX.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
---
 drivers/media/platform/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index c7caf94..eb70dda 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -112,7 +112,7 @@ config VIDEO_OMAP3_DEBUG
 config VIDEO_S3C_CAMIF
 	tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver"
 	depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
-	depends on (PLAT_S3C64XX || PLAT_S3C24XX) && PM_RUNTIME
+	depends on (ARCH_S3C64XX || PLAT_S3C24XX) && PM_RUNTIME
 	select VIDEOBUF2_DMA_CONTIG
 	---help---
 	  This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera
-- 
1.8.3.2

[PATCH 3/5] [media] s3c-camif: Use CONFIG_ARCH_S3C64XX to check for S3C64xx support

[Sylwester Nawrocki]

On 09/28/2013 08:21 PM, Tomasz Figa wrote:
> Since CONFIG_PLAT_S3C64XX is going to be removed, this patch modifies
> the Kconfig entry of s3c-camif driver to use the proper way of checking
> for S3C64xx support - CONFIG_ARCH_S3C64XX.
>
> Signed-off-by: Tomasz Figa<tomasz.figa@gmail.com>

Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>

[PATCH 4/5] ASoC: samsung: Use CONFIG_ARCH_S3C64XX to check for S3C64xx support

[Tomasz Figa]

Since CONFIG_PLAT_S3C64XX is going to be removed, this patch modifies
the s3c-i2s-v2 driver to use the proper way of checking for S3C64xx
support - CONFIG_ARCH_S3C64XX.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
---
 sound/soc/samsung/s3c-i2s-v2.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/sound/soc/samsung/s3c-i2s-v2.c b/sound/soc/samsung/s3c-i2s-v2.c
index e5e81b1..fefc561 100644
--- a/sound/soc/samsung/s3c-i2s-v2.c
+++ b/sound/soc/samsung/s3c-i2s-v2.c
@@ -31,11 +31,7 @@
 #undef S3C_IIS_V2_SUPPORTED
 
 #if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) \
-	|| defined(CONFIG_CPU_S5PV210)
-#define S3C_IIS_V2_SUPPORTED
-#endif
-
-#ifdef CONFIG_PLAT_S3C64XX
+	|| defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_CPU_S5PV210)
 #define S3C_IIS_V2_SUPPORTED
 #endif
 
-- 
1.8.3.2

[PATCH 4/5] ASoC: samsung: Use CONFIG_ARCH_S3C64XX to check for S3C64xx support

[Mark Brown]

On Sat, Sep 28, 2013 at 08:21:36PM +0200, Tomasz Figa wrote:
> Since CONFIG_PLAT_S3C64XX is going to be removed, this patch modifies
> the s3c-i2s-v2 driver to use the proper way of checking for S3C64xx
> support - CONFIG_ARCH_S3C64XX.

Acked-by: Mark Brown <broonie@linaro.org>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20130928/a30b6c70/attachment.sig>

[PATCH 5/5] ARM: s3c64xx: Kill CONFIG_PLAT_S3C64XX

[Tomasz Figa]

CONFIG_PLAT_S3C64XX has been kept in place way too long since it was
marked as temporary in commit

110d85a ARM: S3C64XX: Eliminate plat-s3c64xx

After fixing all users of it in previous patches, this patch finally
kills this temporary Kconfig entry.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
---
 arch/arm/Kconfig              |  2 ++
 arch/arm/mach-s3c64xx/Kconfig | 11 -----------
 2 files changed, 2 insertions(+), 11 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index dc51f8a..40d5178 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -738,10 +738,12 @@ config ARCH_S3C64XX
 	select NEED_MACH_GPIO_H
 	select NO_IOPORT
 	select PLAT_SAMSUNG
+	select PM_GENERIC_DOMAINS
 	select S3C_DEV_NAND
 	select S3C_GPIO_TRACK
 	select SAMSUNG_ATAGS
 	select SAMSUNG_GPIOLIB_4BIT
+	select SAMSUNG_WAKEMASK
 	select SAMSUNG_WDT_RESET
 	select USB_ARCH_HAS_OHCI
 	help
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 0e23910..2cb8dc5 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -5,17 +5,6 @@
 
 if ARCH_S3C64XX
 
-# temporary until we can eliminate all drivers using it.
-config PLAT_S3C64XX
-	bool
-	depends on ARCH_S3C64XX
-	default y
-	select PM_GENERIC_DOMAINS
-	select SAMSUNG_WAKEMASK
-	help
-	  Base platform code for any Samsung S3C64XX device
-
-
 # Configuration options for the S3C6410 CPU
 
 config CPU_S3C6400
-- 
1.8.3.2

[PATCH 1/5] ARM: Kconfig: Move if ARCH_S3C64XX statement to mach-s3c64xx/Kconfig

[Kukjin Kim]

Tomasz Figa wrote:
> 
> All other platforms have this condition checked inside their own Kconfig
> files, so for consistency this patch makes it this way for mach-s3c64xx
> as well.
> 
> Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
> ---
>  arch/arm/Kconfig              | 2 --
>  arch/arm/mach-s3c64xx/Kconfig | 4 ++++
>  2 files changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index b766dad..dc51f8a 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -995,9 +995,7 @@ source "arch/arm/mach-sti/Kconfig"
> 
>  source "arch/arm/mach-s3c24xx/Kconfig"
> 
> -if ARCH_S3C64XX
>  source "arch/arm/mach-s3c64xx/Kconfig"
> -endif
> 
>  source "arch/arm/mach-s5p64x0/Kconfig"
> 
> diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
> index bd14e3a..0e23910 100644
> --- a/arch/arm/mach-s3c64xx/Kconfig
> +++ b/arch/arm/mach-s3c64xx/Kconfig
> @@ -3,6 +3,8 @@
>  #
>  # Licensed under GPLv2
> 
> +if ARCH_S3C64XX
> +
>  # temporary until we can eliminate all drivers using it.
>  config PLAT_S3C64XX
>  	bool
> @@ -322,3 +324,5 @@ config MACH_S3C64XX_DT
>  	  board.
>  	  Note: This is under development and not all peripherals can be
>  	  supported with this machine file.
> +
> +endif
> --
> 1.8.3.2

Looks good to me, applied 1 to 5 patches into cleanup.

Thanks,
Kukjin