[RESEND] [PATCH V3] ARM: dts: Add DMA controller node info on Exynos5420.

[l.krishna@samsung.com (Leela Krishna Amudala)]

From: Padmavathi Venna <padma.v@samsung.com>

This patch adds dma controller node info on Exynos5420.
Exynos5420 has adma for audio IPs. As adma clk is dependent
on audss clk provider that will be added later.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com>
---
Change since V2:
	- Removed adma node as adma clock is dependent audss clock provider.

Changes since V1:
        - In V1, dma node common stuff was added in common exynos5.dtsi file.
          This was removed as per Kukjin comment and added in exynos5420.dtsi.

 arch/arm/boot/dts/exynos5420.dtsi |   52 +++++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index d537cd7..15465f8 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -186,6 +186,58 @@
 		status = "okay";
 	};
 
+	amba {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,amba-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		pdma0: pdma at 121A0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x121A0000 0x1000>;
+			interrupts = <0 34 0>;
+			clocks = <&clock 362>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		pdma1: pdma at 121B0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x121B0000 0x1000>;
+			interrupts = <0 35 0>;
+			clocks = <&clock 363>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <32>;
+		};
+
+		mdma0: mdma at 10800000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x10800000 0x1000>;
+			interrupts = <0 33 0>;
+			clocks = <&clock 473>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
+		};
+
+		mdma1: mdma at 11C10000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x11C10000 0x1000>;
+			interrupts = <0 124 0>;
+			clocks = <&clock 442>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			#dma-channels = <8>;
+			#dma-requests = <1>;
+		};
+	};
+
 	serial at 12C00000 {
 		clocks = <&clock 257>, <&clock 128>;
 		clock-names = "uart", "clk_uart_baud0";
-- 
1.7.10.4