From mboxrd@z Thu Jan 1 00:00:00 1970 From: peter.chen@freescale.com (Peter Chen) Date: Sat, 12 Oct 2013 17:09:43 +0800 Subject: [PATCH 09/12] usb: phy-mxs: update binding for adding anatop phandle In-Reply-To: <1381568986-19802-1-git-send-email-peter.chen@freescale.com> References: <1381568986-19802-1-git-send-email-peter.chen@freescale.com> Message-ID: <1381568986-19802-10-git-send-email-peter.chen@freescale.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add anatop phandle which is used to access anatop registers to control PHY's power and other USB operations. Signed-off-by: Peter Chen --- Documentation/devicetree/bindings/usb/mxs-phy.txt | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt index 5835b27..1a9bd85 100644 --- a/Documentation/devicetree/bindings/usb/mxs-phy.txt +++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt @@ -4,10 +4,12 @@ Required properties: - compatible: Should be "fsl,imx23-usbphy" - reg: Should contain registers location and length - interrupts: Should contain phy interrupt +- fsl,anatop: phandle for anatop register Example: usbphy1: usbphy at 020c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 0x04>; + fsl,anatop = <&anatop>; }; -- 1.7.1