From: wsa@the-dreams.de (Wolfram Sang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/4] drivers/mmc/host: don't use devm_pinctrl_get_select_default() in probe
Date: Sun, 13 Oct 2013 18:17:48 +0200 [thread overview]
Message-ID: <1381681071-6021-3-git-send-email-wsa@the-dreams.de> (raw)
In-Reply-To: <1381681071-6021-1-git-send-email-wsa@the-dreams.de>
Since commit ab78029 (drivers/pinctrl: grab default handles from device core),
we can rely on device core for setting the default pins. Compile tested only.
Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13)
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
---
drivers/mmc/host/mvsdio.c | 7 +------
drivers/mmc/host/omap_hsmmc.c | 7 -------
drivers/mmc/host/sdhci-esdhc-imx.c | 8 --------
3 files changed, 1 insertion(+), 21 deletions(-)
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index 06c5b0b..8c9f448 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -25,7 +25,6 @@
#include <linux/of_irq.h>
#include <linux/mmc/host.h>
#include <linux/mmc/slot-gpio.h>
-#include <linux/pinctrl/consumer.h>
#include <asm/sizes.h>
#include <asm/unaligned.h>
@@ -685,7 +684,7 @@ static int __init mvsd_probe(struct platform_device *pdev)
const struct mbus_dram_target_info *dram;
struct resource *r;
int ret, irq;
- struct pinctrl *pinctrl;
+ int gpio_card_detect, gpio_write_protect;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
@@ -702,10 +701,6 @@ static int __init mvsd_probe(struct platform_device *pdev)
host->mmc = mmc;
host->dev = &pdev->dev;
- pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
- if (IS_ERR(pinctrl))
- dev_warn(&pdev->dev, "no pins associated\n");
-
/*
* Some non-DT platforms do not pass a clock, and the clock
* frequency is passed through platform_data. On DT platforms,
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 6ac63df..f6606cf 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -38,7 +38,6 @@
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
-#include <linux/pinctrl/consumer.h>
#include <linux/pm_runtime.h>
#include <linux/platform_data/mmc-omap.h>
@@ -1777,7 +1776,6 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
const struct of_device_id *match;
dma_cap_mask_t mask;
unsigned tx_req, rx_req;
- struct pinctrl *pinctrl;
match = of_match_device(of_match_ptr(omap_mmc_of_match), &pdev->dev);
if (match) {
@@ -1996,11 +1994,6 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
omap_hsmmc_disable_irq(host);
- pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
- if (IS_ERR(pinctrl))
- dev_warn(&pdev->dev,
- "pins are not configured from the driver\n");
-
omap_hsmmc_protect_card(host);
mmc_add_host(mmc);
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index abc8cf0..0ac8b1a 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -25,7 +25,6 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
-#include <linux/pinctrl/consumer.h>
#include <linux/platform_data/mmc-esdhc-imx.h>
#include "sdhci-pltfm.h"
#include "sdhci-esdhc.h"
@@ -80,7 +79,6 @@ struct pltfm_imx_data {
int flags;
u32 scratchpad;
enum imx_esdhc_type devtype;
- struct pinctrl *pinctrl;
struct esdhc_platform_data boarddata;
struct clk *clk_ipg;
struct clk *clk_ahb;
@@ -568,12 +566,6 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
clk_prepare_enable(imx_data->clk_ipg);
clk_prepare_enable(imx_data->clk_ahb);
- imx_data->pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
- if (IS_ERR(imx_data->pinctrl)) {
- err = PTR_ERR(imx_data->pinctrl);
- goto disable_clk;
- }
-
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
if (is_imx25_esdhc(imx_data) || is_imx35_esdhc(imx_data))
--
1.8.4.rc3
next prev parent reply other threads:[~2013-10-13 16:17 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-13 16:17 [PATCH 0/4] remove devm_pinctrl_get_select_default from drivers Wolfram Sang
2013-10-13 16:17 ` [PATCH 1/4] drivers/gpu/drm/tilcdc: don't use devm_pinctrl_get_select_default() in probe Wolfram Sang
2013-10-13 16:17 ` Wolfram Sang [this message]
2013-10-13 16:17 ` [PATCH 3/4] drivers/pwm: " Wolfram Sang
2013-10-15 10:17 ` Thierry Reding
2013-10-22 7:39 ` Thierry Reding
2013-10-13 16:17 ` [PATCH 4/4] sound/soc/atmel: " Wolfram Sang
2013-10-14 5:28 ` Bo Shen
2013-10-14 13:17 ` Mark Brown
2013-10-14 14:56 ` Wolfram Sang
2013-10-14 16:37 ` Mark Brown
2013-10-17 16:46 ` Wolfram Sang
2013-10-17 17:42 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1381681071-6021-3-git-send-email-wsa@the-dreams.de \
--to=wsa@the-dreams.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).