From mboxrd@z Thu Jan 1 00:00:00 1970 From: iivanov@mm-sol.com (Ivan T. Ivanov) Date: Mon, 14 Oct 2013 18:24:31 +0300 Subject: [PATCH v3 04/13] usb: phy: msm: Remove unnecessarily check for valid regulators. In-Reply-To: <1381764280-28420-1-git-send-email-iivanov@mm-sol.com> References: <1381764280-28420-1-git-send-email-iivanov@mm-sol.com> Message-ID: <1381764280-28420-5-git-send-email-iivanov@mm-sol.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: "Ivan T. Ivanov" Whether regulators are available or not is checked at driver probe. If they are not available driver will refuse to load, so no need to check them again. Signed-off-by: Ivan T. Ivanov --- drivers/usb/phy/phy-msm-usb.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 136f063..b77441b 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -159,16 +159,6 @@ static int msm_hsusb_ldo_set_mode(struct msm_otg *motg, int on) { int ret = 0; - if (!motg->v1p8 || IS_ERR(motg->v1p8)) { - pr_err("%s: HSUSB_1p8 is not initialized\n", __func__); - return -ENODEV; - } - - if (!motg->v3p3 || IS_ERR(motg->v3p3)) { - pr_err("%s: HSUSB_3p3 is not initialized\n", __func__); - return -ENODEV; - } - if (on) { ret = regulator_set_optimum_mode(motg->v1p8, USB_PHY_1P8_HPM_LOAD); -- 1.7.9.5