From mboxrd@z Thu Jan 1 00:00:00 1970 From: kishon@ti.com (Kishon Vijay Abraham I) Date: Wed, 16 Oct 2013 01:24:17 +0530 Subject: [PATCH v2 7/7] arm/dts: added dt properties to adapt to the new phy framwork In-Reply-To: <1381866857-3861-1-git-send-email-kishon@ti.com> References: <1381866857-3861-1-git-send-email-kishon@ti.com> Message-ID: <1381866857-3861-8-git-send-email-kishon@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Added device tree bindings for dwc3, usb2 and usb3 PHYs. The documentation of these can be found at Documentation/devicetree/bindings/phy/phy-bindings.txt and Documentation/devicetree/bindings/phy/ti-phy.txt. Signed-off-by: Kishon Vijay Abraham I --- arch/arm/boot/dts/omap5.dtsi | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index edc801f..998f198 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -661,7 +661,8 @@ compatible = "snps,dwc3"; reg = <0x4a030000 0x10000>; interrupts = ; - usb-phy = <&usb2_phy>, <&usb3_phy>; + phys = <&usb2_phy>, <&usb3_phy>; + phy-names = "usb2-phy", "usb3-phy"; tx-fifo-resize; }; }; @@ -677,6 +678,7 @@ compatible = "ti,omap-usb2"; reg = <0x4a084000 0x7c>; ctrl-module = <&omap_control_usb2phy>; + #phy-cells = <0>; }; usb3_phy: usb3phy at 4a084400 { @@ -686,6 +688,7 @@ <0x4a084c00 0x40>; reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ctrl-module = <&omap_control_usb3phy>; + #phy-cells = <0>; }; }; -- 1.7.10.4