From: Li.Xiubo@freescale.com (Xiubo Li)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv1 7/8] ARM: dts: Enable SGT15000 codec based audio driver node for VF610.
Date: Thu, 17 Oct 2013 17:01:16 +0800 [thread overview]
Message-ID: <1382000477-17304-8-git-send-email-Li.Xiubo@freescale.com> (raw)
In-Reply-To: <1382000477-17304-1-git-send-email-Li.Xiubo@freescale.com>
This patch add and enable SGT15000 codec support, and also specified
the corresponding SAI node.
Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Alison Wang <b18965@freescale.com
---
arch/arm/boot/dts/vf610-twr.dts | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts
index e4106dd..a2d9214 100644
--- a/arch/arm/boot/dts/vf610-twr.dts
+++ b/arch/arm/boot/dts/vf610-twr.dts
@@ -34,6 +34,19 @@
};
};
+ sound {
+ compatible = "fsl,vf610-sgtl5000";
+ model = "vf610-sgtl5000";
+ saif-controller = <&sai2>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT",
+ "Ext Spk", "LINE_OUT";
+ };
+
};
&fec0 {
@@ -55,6 +68,12 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0_1>;
status = "okay";
+
+ codec: sgtl5000 at 0a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks VF610_CLK_SAI2>;
+ };
};
&sai2 {
--
1.8.0
next prev parent reply other threads:[~2013-10-17 9:01 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-17 9:01 [PATCHv1 0/8] ALSA: Add SAI driver and enable SGT15000 codec Xiubo Li
2013-10-17 9:01 ` [PATCHv1 1/8] ALSA: Add SAI SoC Digital Audio Interface driver Xiubo Li
2013-10-17 9:42 ` Lothar Waßmann
2013-10-18 3:19 ` Xiubo Li-B47053
2013-10-17 12:15 ` Timur Tabi
2013-10-17 12:21 ` [alsa-devel] " Lars-Peter Clausen
2013-10-17 13:22 ` Timur Tabi
2013-10-17 13:33 ` Lars-Peter Clausen
2013-10-17 13:37 ` Timur Tabi
2013-10-17 13:51 ` Lars-Peter Clausen
2013-10-17 14:10 ` Mark Brown
2013-10-18 3:42 ` Xiubo Li-B47053
2013-10-17 17:43 ` Lars-Peter Clausen
2013-10-21 6:59 ` Xiubo Li-B47053
2013-10-22 2:20 ` Xiubo Li-B47053
2013-10-28 5:58 ` Xiubo Li-B47053
2013-11-12 5:02 ` Vinod Koul
2013-11-12 7:35 ` Li Xiubo
2013-11-12 7:59 ` Lars-Peter Clausen
2013-10-24 11:05 ` Mark Brown
2013-10-28 7:15 ` Xiubo Li-B47053
2013-10-29 4:00 ` Xiubo Li-B47053
2013-10-29 4:02 ` Nicolin Chen
2013-10-29 9:31 ` Xiubo Li-B47053
2013-10-17 9:01 ` [PATCHv1 2/8] ARM: dts: Add Freescale SAI ALSA SoC Digital Audio Interface node for VF610 Xiubo Li
2013-10-17 9:01 ` [PATCHv1 3/8] ARM: dts: Enables SAI ALSA SoC DAI device for Vybrid VF610 TOWER board Xiubo Li
2013-10-17 9:01 ` [PATCHv1 4/8] Documentation: Add device tree bindings for Freescale SAI Xiubo Li
2013-10-17 9:01 ` [PATCHv1 5/8] ASoC: sgtl5000: Revise the bugs about the sgt15000 codec Xiubo Li
2013-10-17 9:56 ` Nicolin Chen
2013-10-21 4:07 ` Xiubo Li-B47053
2013-10-17 10:17 ` Lothar Waßmann
2013-10-21 4:15 ` Xiubo Li-B47053
2013-10-21 8:11 ` Lothar Waßmann
2013-10-21 11:21 ` Timur Tabi
2013-10-18 17:28 ` Mark Brown
2013-10-28 6:07 ` Xiubo Li-B47053
2013-10-17 9:01 ` [PATCHv1 6/8] ASoC: fsl: add SGT15000 based audio machine driver Xiubo Li
2013-10-18 17:33 ` Mark Brown
2013-10-21 7:50 ` Xiubo Li-B47053
2013-10-17 9:01 ` Xiubo Li [this message]
2013-10-17 9:01 ` [PATCHv1 8/8] Documentation: Add device tree bindings for Freescale VF610 sound Xiubo Li
2013-10-17 9:46 ` Lucas Stach
2013-10-18 3:27 ` Xiubo Li-B47053
2013-10-18 17:31 ` Mark Brown
2013-10-21 7:24 ` Xiubo Li-B47053
2013-10-22 9:47 ` Mark Brown
2013-10-17 10:22 ` [PATCHv1 0/8] ALSA: Add SAI driver and enable SGT15000 codec Lothar Waßmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1382000477-17304-8-git-send-email-Li.Xiubo@freescale.com \
--to=li.xiubo@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).