From: dbaryshkov@gmail.com (Dmitry Eremin-Solenikov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/3] ALSA: ASoC: pxa: fix pxa2xx-ac97 DAI initialization order
Date: Thu, 17 Oct 2013 14:01:36 +0400 [thread overview]
Message-ID: <1382004097-6350-2-git-send-email-dbaryshkov@gmail.com> (raw)
In-Reply-To: <1382004097-6350-1-git-send-email-dbaryshkov@gmail.com>
After recent changes to codec/DAI initialization order changes, codec
driver (wm9712 in my case) tries to access codec prior to
pxa2xx_ac97_hw_probe() being called (because DAIs are probed after all
codecs are probed). Move hw-related probe/remove/suspend/resume
functions to pxa2xx-ac97 driver level, instead of DAI level.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
---
sound/soc/pxa/pxa2xx-ac97.c | 56 ++++++++++++++++++++-------------------------
1 file changed, 25 insertions(+), 31 deletions(-)
diff --git a/sound/soc/pxa/pxa2xx-ac97.c b/sound/soc/pxa/pxa2xx-ac97.c
index f1059d9..ae956e3 100644
--- a/sound/soc/pxa/pxa2xx-ac97.c
+++ b/sound/soc/pxa/pxa2xx-ac97.c
@@ -89,33 +89,6 @@ static struct snd_dmaengine_dai_dma_data pxa2xx_ac97_pcm_mic_mono_in = {
.filter_data = &pxa2xx_ac97_pcm_aux_mic_mono_req,
};
-#ifdef CONFIG_PM
-static int pxa2xx_ac97_suspend(struct snd_soc_dai *dai)
-{
- return pxa2xx_ac97_hw_suspend();
-}
-
-static int pxa2xx_ac97_resume(struct snd_soc_dai *dai)
-{
- return pxa2xx_ac97_hw_resume();
-}
-
-#else
-#define pxa2xx_ac97_suspend NULL
-#define pxa2xx_ac97_resume NULL
-#endif
-
-static int pxa2xx_ac97_probe(struct snd_soc_dai *dai)
-{
- return pxa2xx_ac97_hw_probe(to_platform_device(dai->dev));
-}
-
-static int pxa2xx_ac97_remove(struct snd_soc_dai *dai)
-{
- pxa2xx_ac97_hw_remove(to_platform_device(dai->dev));
- return 0;
-}
-
static int pxa2xx_ac97_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *cpu_dai)
@@ -185,10 +158,6 @@ static struct snd_soc_dai_driver pxa_ac97_dai_driver[] = {
{
.name = "pxa2xx-ac97",
.ac97_control = 1,
- .probe = pxa2xx_ac97_probe,
- .remove = pxa2xx_ac97_remove,
- .suspend = pxa2xx_ac97_suspend,
- .resume = pxa2xx_ac97_resume,
.playback = {
.stream_name = "AC97 Playback",
.channels_min = 2,
@@ -246,6 +215,12 @@ static int pxa2xx_ac97_dev_probe(struct platform_device *pdev)
return -ENXIO;
}
+ ret = pxa2xx_ac97_hw_probe(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "PXA2xx AC97 hw probe error (%d)\n", ret);
+ return ret;
+ }
+
ret = snd_soc_set_ac97_ops(&pxa2xx_ac97_ops);
if (ret != 0)
return ret;
@@ -262,15 +237,34 @@ static int pxa2xx_ac97_dev_remove(struct platform_device *pdev)
{
snd_soc_unregister_component(&pdev->dev);
snd_soc_set_ac97_ops(NULL);
+ pxa2xx_ac97_hw_remove(pdev);
return 0;
}
+#ifdef CONFIG_PM_SLEEP
+static int pxa2xx_ac97_dev_suspend(struct device *dev)
+{
+ return pxa2xx_ac97_hw_suspend();
+}
+
+static int pxa2xx_ac97_dev_resume(struct device *dev)
+{
+ return pxa2xx_ac97_hw_resume();
+}
+
+static SIMPLE_DEV_PM_OPS(pxa2xx_ac97_pm_ops,
+ pxa2xx_ac97_dev_suspend, pxa2xx_ac97_dev_resume);
+#endif
+
static struct platform_driver pxa2xx_ac97_driver = {
.probe = pxa2xx_ac97_dev_probe,
.remove = pxa2xx_ac97_dev_remove,
.driver = {
.name = "pxa2xx-ac97",
.owner = THIS_MODULE,
+#ifdef CONFIG_PM_SLEEP
+ .pm = &pxa2xx_ac97_pm_ops,
+#endif
},
};
--
1.8.4.rc3
next prev parent reply other threads:[~2013-10-17 10:01 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-17 10:01 [PATCH 1/3] ALSA: pxa: slightly refactor reset handling Dmitry Eremin-Solenikov
2013-10-17 10:01 ` Dmitry Eremin-Solenikov [this message]
2013-10-17 10:01 ` [PATCH 3/3] ALSA: ASoC: pxa: add asoc pm callbacks to pxa audio drivers Dmitry Eremin-Solenikov
2013-10-17 23:36 ` [PATCH 1/3] ALSA: pxa: slightly refactor reset handling Mark Brown
2013-10-17 23:53 ` Dmitry Eremin-Solenikov
2013-10-18 0:19 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1382004097-6350-2-git-send-email-dbaryshkov@gmail.com \
--to=dbaryshkov@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).