From: denis@eukrea.com (Denis Carikli)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 02/11] video: imxfb: Introduce regulator support.
Date: Fri, 18 Oct 2013 17:04:23 +0200 [thread overview]
Message-ID: <1382108672-23269-2-git-send-email-denis@eukrea.com> (raw)
In-Reply-To: <1382108672-23269-1-git-send-email-denis@eukrea.com>
This commit is based on the following commit by Fabio Estevam:
4344429 video: mxsfb: Introduce regulator support
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel at lists.infradead.org
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev at vger.kernel.org
Cc: Eric B?nard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
drivers/video/imxfb.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 44ee678..4dd7678 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -28,6 +28,7 @@
#include <linux/cpufreq.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
#include <linux/dma-mapping.h>
#include <linux/io.h>
#include <linux/math64.h>
@@ -145,6 +146,7 @@ struct imxfb_info {
struct clk *clk_ipg;
struct clk *clk_ahb;
struct clk *clk_per;
+ struct regulator *reg_lcd;
enum imxfb_type devtype;
bool enabled;
@@ -563,12 +565,23 @@ static void imxfb_exit_backlight(struct imxfb_info *fbi)
static void imxfb_enable_controller(struct imxfb_info *fbi)
{
+ int ret;
if (fbi->enabled)
return;
pr_debug("Enabling LCD controller\n");
+ if (fbi->reg_lcd) {
+ ret = regulator_enable(fbi->reg_lcd);
+ if (ret) {
+ dev_err(&fbi->pdev->dev,
+ "lcd regulator enable failed with error: %d\n",
+ ret);
+ return;
+ }
+ }
+
writel(fbi->screen_dma, fbi->regs + LCDC_SSA);
/* panning offset 0 (0 pixel offset) */
@@ -597,6 +610,8 @@ static void imxfb_enable_controller(struct imxfb_info *fbi)
static void imxfb_disable_controller(struct imxfb_info *fbi)
{
+ int ret;
+
if (!fbi->enabled)
return;
@@ -613,6 +628,14 @@ static void imxfb_disable_controller(struct imxfb_info *fbi)
fbi->enabled = false;
writel(0, fbi->regs + LCDC_RMCR);
+
+ if (fbi->reg_lcd) {
+ ret = regulator_disable(fbi->reg_lcd);
+ if (ret)
+ dev_err(&fbi->pdev->dev,
+ "lcd regulator disable failed with error: %d\n",
+ ret);
+ }
}
static int imxfb_blank(int blank, struct fb_info *info)
@@ -1020,6 +1043,10 @@ static int imxfb_probe(struct platform_device *pdev)
goto failed_register;
}
+ fbi->reg_lcd = devm_regulator_get(&pdev->dev, "lcd");
+ if (IS_ERR(fbi->reg_lcd))
+ fbi->reg_lcd = NULL;
+
imxfb_enable_controller(fbi);
fbi->pdev = pdev;
#ifdef PWMR_BACKLIGHT_AVAILABLE
--
1.7.9.5
next prev parent reply other threads:[~2013-10-18 15:04 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-18 15:04 [PATCH 01/11] of: add vendor prefix for Eukréa Electromatique Denis Carikli
2013-10-18 15:04 ` Denis Carikli [this message]
2013-10-19 10:45 ` [PATCH 02/11] video: imxfb: Introduce regulator support Jean-Christophe PLAGNIOL-VILLARD
2013-10-21 9:13 ` [PATCHv4] video: backlight: gpio-backlight: Add DT support Denis Carikli
2013-10-21 22:48 ` Laurent Pinchart
2013-10-22 5:11 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-22 4:58 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-22 7:23 ` Thierry Reding
2013-10-22 15:34 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-22 20:01 ` Thierry Reding
2013-10-23 13:42 ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-23 16:49 ` Stephen Warren
2013-10-23 20:08 ` Thierry Reding
2013-10-23 16:51 ` Stephen Warren
2013-10-23 20:20 ` Thierry Reding
2013-10-23 22:38 ` Laurent Pinchart
2013-10-24 11:05 ` Thierry Reding
2013-10-25 13:57 ` Laurent Pinchart
2013-10-31 23:44 ` Jingoo Han
2013-11-01 9:57 ` Thierry Reding
2013-11-04 0:20 ` Jingoo Han
2013-10-31 23:37 ` Jingoo Han
2013-11-01 10:13 ` Thierry Reding
2013-11-06 0:08 ` Laurent Pinchart
2013-10-25 20:10 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1382108672-23269-2-git-send-email-denis@eukrea.com \
--to=denis@eukrea.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).