From: christoffer.dall@linaro.org (Christoffer Dall)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH RESEND v2 8/8] KVM: arm-vgic: Support CPU interface reg access
Date: Tue, 22 Oct 2013 10:08:43 +0100 [thread overview]
Message-ID: <1382432923-61267-9-git-send-email-christoffer.dall@linaro.org> (raw)
In-Reply-To: <1382432923-61267-1-git-send-email-christoffer.dall@linaro.org>
Implement support for the CPU interface register access driven by MMIO
address offsets from the CPU interface base address. Useful for user
space to support save/restore of the VGIC state.
This commit adds support only for the same logic as the current VGIC
support, and no more. For example, the active priority registers are
handled as RAZ/WI, just like setting priorities on the emulated
distributor.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Alexander Graf <agraf@suse.de>
---
virt/kvm/arm/vgic.c | 81 ++++++++++++++++++++++++++++++++++++++++++++++-----
1 file changed, 73 insertions(+), 8 deletions(-)
diff --git a/virt/kvm/arm/vgic.c b/virt/kvm/arm/vgic.c
index 4e8c3ab..3cfdd4d 100644
--- a/virt/kvm/arm/vgic.c
+++ b/virt/kvm/arm/vgic.c
@@ -71,6 +71,10 @@
#define VGIC_ADDR_UNDEF (-1)
#define IS_VGIC_ADDR_UNDEF(_x) ((_x) == VGIC_ADDR_UNDEF)
+#define PRODUCT_ID_KVM 0x4b /* ASCII code K */
+#define IMPLEMENTER_ARM 0x43b
+#define GICC_ARCH_VERSION_V2 0x2
+
/* Physical address of vgic virtual cpu interface */
static phys_addr_t vgic_vcpu_base;
@@ -312,7 +316,7 @@ static bool handle_mmio_misc(struct kvm_vcpu *vcpu,
u32 word_offset = offset & 3;
switch (offset & ~3) {
- case 0: /* CTLR */
+ case 0: /* GICD_CTLR */
reg = vcpu->kvm->arch.vgic.enabled;
vgic_reg_access(mmio, ®, word_offset,
ACCESS_READ_VALUE | ACCESS_WRITE_VALUE);
@@ -323,15 +327,15 @@ static bool handle_mmio_misc(struct kvm_vcpu *vcpu,
}
break;
- case 4: /* TYPER */
+ case 4: /* GICD_TYPER */
reg = (atomic_read(&vcpu->kvm->online_vcpus) - 1) << 5;
reg |= (VGIC_NR_IRQS >> 5) - 1;
vgic_reg_access(mmio, ®, word_offset,
ACCESS_READ_VALUE | ACCESS_WRITE_IGNORED);
break;
- case 8: /* IIDR */
- reg = 0x4B00043B;
+ case 8: /* GICD_IIDR */
+ reg = (PRODUCT_ID_KVM << 24) | (IMPLEMENTER_ARM << 0);
vgic_reg_access(mmio, ®, word_offset,
ACCESS_READ_VALUE | ACCESS_WRITE_IGNORED);
break;
@@ -1682,9 +1686,70 @@ int kvm_vgic_addr(struct kvm *kvm, unsigned long type, u64 *addr, bool write)
static bool handle_cpu_mmio_misc(struct kvm_vcpu *vcpu,
struct kvm_exit_mmio *mmio, phys_addr_t offset)
{
- return true;
+ struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
+ u32 reg, mask = 0, shift = 0;
+ bool updated = false;
+
+ switch (offset & ~0x3) {
+ case GIC_CPU_CTRL:
+ mask = GICH_VMCR_CTRL_MASK;
+ shift = GICH_VMCR_CTRL_SHIFT;
+ break;
+ case GIC_CPU_PRIMASK:
+ mask = GICH_VMCR_PRIMASK_MASK;
+ shift = GICH_VMCR_PRIMASK_SHIFT;
+ break;
+ case GIC_CPU_BINPOINT:
+ mask = GICH_VMCR_BINPOINT_MASK;
+ shift = GICH_VMCR_BINPOINT_SHIFT;
+ break;
+ case GIC_CPU_ALIAS_BINPOINT:
+ mask = GICH_VMCR_ALIAS_BINPOINT_MASK;
+ shift = GICH_VMCR_ALIAS_BINPOINT_SHIFT;
+ break;
+ }
+
+ if (!mmio->is_write) {
+ reg = (vgic_cpu->vgic_vmcr & mask) >> shift;
+ mmio_data_write(mmio, ~0, reg);
+ } else {
+ reg = mmio_data_read(mmio, ~0);
+ reg = (reg << shift) & mask;
+ if (reg != (vgic_cpu->vgic_vmcr & mask))
+ updated = true;
+ vgic_cpu->vgic_vmcr &= ~mask;
+ vgic_cpu->vgic_vmcr |= reg;
+ }
+ return updated;
}
+static bool handle_mmio_abpr(struct kvm_vcpu *vcpu,
+ struct kvm_exit_mmio *mmio, phys_addr_t offset)
+{
+ return handle_cpu_mmio_misc(vcpu, mmio, GIC_CPU_ALIAS_BINPOINT);
+}
+
+static bool handle_cpu_mmio_ident(struct kvm_vcpu *vcpu,
+ struct kvm_exit_mmio *mmio,
+ phys_addr_t offset)
+{
+ u32 reg;
+
+ if (mmio->is_write)
+ return false;
+
+ /* GICC_IIDR */
+ reg = (PRODUCT_ID_KVM << 20) |
+ (GICC_ARCH_VERSION_V2 << 16) |
+ (IMPLEMENTER_ARM << 0);
+ mmio_data_write(mmio, ~0, reg);
+ return false;
+}
+
+/*
+ * CPU Interface Register accesses - these are not accessed by the VM, but by
+ * user space for saving and restoring VGIC state.
+ */
static const struct mmio_range vgic_cpu_ranges[] = {
{
.base = GIC_CPU_CTRL,
@@ -1694,17 +1759,17 @@ static const struct mmio_range vgic_cpu_ranges[] = {
{
.base = GIC_CPU_ALIAS_BINPOINT,
.len = 4,
- .handle_mmio = handle_cpu_mmio_misc,
+ .handle_mmio = handle_mmio_abpr,
},
{
.base = GIC_CPU_ACTIVEPRIO,
.len = 16,
- .handle_mmio = handle_cpu_mmio_misc,
+ .handle_mmio = handle_mmio_raz_wi,
},
{
.base = GIC_CPU_IDENT,
.len = 4,
- .handle_mmio = handle_cpu_mmio_misc,
+ .handle_mmio = handle_cpu_mmio_ident,
},
};
--
1.7.10.4
prev parent reply other threads:[~2013-10-22 9:08 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-22 9:08 [PATCH RESEND v2 0/8] Support VGIC save/restore using device control API Christoffer Dall
2013-10-22 9:08 ` [PATCH RESEND v2 1/8] ARM: KVM: Allow creating the VGIC after VCPUs Christoffer Dall
2013-10-22 9:08 ` [PATCH RESEND v2 2/8] KVM: arm-vgic: Support KVM_CREATE_DEVICE for VGIC Christoffer Dall
2013-10-23 14:55 ` Marc Zyngier
2013-10-27 17:18 ` Christoffer Dall
2013-10-22 9:08 ` [PATCH RESEND v2 3/8] KVM: arm-vgic: Set base addr through device API Christoffer Dall
2013-10-23 15:10 ` Marc Zyngier
2013-10-27 17:18 ` Christoffer Dall
2013-10-22 9:08 ` [PATCH RESEND v2 4/8] irqchip: arm-gic: Define additional MMIO offsets and masks Christoffer Dall
2013-10-22 9:08 ` [PATCH RESEND v2 5/8] KVM: arm-vgic: Make vgic mmio functions more generic Christoffer Dall
2013-10-22 9:08 ` [PATCH RESEND v2 6/8] KVM: arm-vgic: Add vgic reg access from dev attr Christoffer Dall
2013-10-23 15:46 ` Marc Zyngier
2013-10-27 17:19 ` Christoffer Dall
2013-10-22 9:08 ` [PATCH RESEND v2 7/8] KVM: arm-vgic: Add GICD_SPENDSGIR and GICD_CPENDSGIR handlers Christoffer Dall
2013-10-23 16:00 ` Marc Zyngier
2013-10-27 17:20 ` Christoffer Dall
2013-10-22 9:08 ` Christoffer Dall [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1382432923-61267-9-git-send-email-christoffer.dall@linaro.org \
--to=christoffer.dall@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).