From: jonathan.austin@arm.com (Jonathan Austin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm: add support for the Cortex-A12 processor
Date: Wed, 23 Oct 2013 13:46:16 +0100 [thread overview]
Message-ID: <1382532376-22758-1-git-send-email-jonathan.austin@arm.com> (raw)
The A12 behaves as the A7/A15 does with respect to setting the SMP bit, and
doesn't require TLB ops broadcasting to be explicitly enabled like the A9 does.
Note that as the ACTLR cannot (usually) be written from non-secure, it is the
responsibility of the bootloader/firmware to set this bit per core - it is
done here in Linux as last resort in case of bad firmware.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Jonathan Austin <jonathan.austin@arm.com>
---
arch/arm/mm/proc-v7.S | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 3a5922d..9745288 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -164,6 +164,7 @@ __v7_cr7mp_setup:
mov r10, #(1 << 0) @ Cache/TLB ops broadcasting
b 1f
__v7_ca7mp_setup:
+__v7_ca12mp_setup:
__v7_ca15mp_setup:
mov r10, #0
1:
@@ -440,6 +441,16 @@ __v7_ca7mp_proc_info:
.size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info
/*
+ * ARM Ltd. Cortex A12 processor.
+ */
+ .type __v7_ca12mp_proc_info, #object
+__v7_ca12mp_proc_info:
+ .long 0x410fc0d0
+ .long 0xff0ffff0
+ __v7_proc __v7_ca12mp_setup
+ .size __v7_ca12mp_proc_info, . - __v7_ca12mp_proc_info
+
+ /*
* ARM Ltd. Cortex A15 processor.
*/
.type __v7_ca15mp_proc_info, #object
--
1.7.9.5
next reply other threads:[~2013-10-23 12:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-23 12:46 Jonathan Austin [this message]
2013-11-06 17:27 ` [PATCH] arm: add support for the Cortex-A12 processor Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1382532376-22758-1-git-send-email-jonathan.austin@arm.com \
--to=jonathan.austin@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).