From: denis@eukrea.com (Denis Carikli)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv6][ 3/7] ARM: imx{25, 27} DT: Permit the selection of the imxfb framebuffer driver.
Date: Thu, 24 Oct 2013 10:01:01 +0200 [thread overview]
Message-ID: <1382601665-6830-3-git-send-email-denis@eukrea.com> (raw)
In-Reply-To: <1382601665-6830-1-git-send-email-denis@eukrea.com>
Without that patch, a user can't select the imxfb driver when the i.MX25 and/or
the i.MX27 device tree board are selected and that no boards that selects
IMX_HAVE_PLATFORM_IMX_FB are compiled in.
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: devicetree at vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: linux-arm-kernel at lists.infradead.org
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Eric B?nard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
---
ChangeLog v5->v6:
- Reworked the patch not to make DT boards depend on IMX_HAVE_PLATFORM_IMX_FB.
- Added better explanations of why that patch is needed in the commit message.
---
arch/arm/mach-imx/Kconfig | 5 +++++
arch/arm/mach-imx/devices/Kconfig | 1 +
drivers/video/Kconfig | 2 +-
3 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 9f67338..3ccb5d5 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -64,6 +64,9 @@ config ARCH_HAS_RNGA
config HAVE_IMX_ANATOP
bool
+config HAVE_IMX_FB
+ bool
+
config HAVE_IMX_GPC
bool
@@ -254,6 +257,7 @@ endchoice
config MACH_IMX25_DT
bool "Support i.MX25 platforms from device tree"
select SOC_IMX25
+ select HAVE_IMX_FB
help
Include support for Freescale i.MX25 based platforms
using the device tree for discovery
@@ -442,6 +446,7 @@ config MACH_IMX27IPCAM
config MACH_IMX27_DT
bool "Support i.MX27 platforms from device tree"
select SOC_IMX27
+ select HAVE_IMX_FB
help
Include support for Freescale i.MX27 based platforms
using the device tree for discovery
diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig
index 68c74fb..a7af9f4 100644
--- a/arch/arm/mach-imx/devices/Kconfig
+++ b/arch/arm/mach-imx/devices/Kconfig
@@ -26,6 +26,7 @@ config IMX_HAVE_PLATFORM_IMXDI_RTC
bool
config IMX_HAVE_PLATFORM_IMX_FB
+ select HAVE_IMX_FB
bool
config IMX_HAVE_PLATFORM_IMX_I2C
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 14317b7..a97529f 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -363,7 +363,7 @@ config FB_SA1100
config FB_IMX
tristate "Freescale i.MX1/21/25/27 LCD support"
- depends on FB && IMX_HAVE_PLATFORM_IMX_FB
+ depends on FB && HAVE_IMX_FB
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
--
1.7.9.5
next prev parent reply other threads:[~2013-10-24 8:01 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-24 8:00 [PATCHv6][ 1/7] video: imxfb: Introduce regulator support Denis Carikli
2013-10-24 8:01 ` [PATCHv6][ 2/7] video: imxfb: Also add pwmr for the device tree Denis Carikli
2013-10-24 8:01 ` Denis Carikli [this message]
2013-10-24 8:15 ` [PATCHv6][ 3/7] ARM: imx{25,27} DT: Permit the selection of the imxfb framebuffer driver Shawn Guo
2013-10-24 8:20 ` Eric Bénard
2013-10-24 8:31 ` Shawn Guo
2013-10-24 8:36 ` Eric Bénard
2013-10-24 8:01 ` [PATCHv6][ 4/7] pinctrl: pinctrl-imx: add imx25 pinctrl driver Denis Carikli
2013-10-24 8:01 ` [PATCHv6][ 5/7] ARM: dts: imx25.dtsi: Add some pinmux pins Denis Carikli
2013-10-24 8:01 ` [PATCHv6][ 6/7] ARM: dts: Add support for the cpuimx25 board from Eukrea and its baseboard Denis Carikli
2013-10-24 8:01 ` [PATCHv6][ 7/7] ARM: imx_v4_v5_defconfig: Enable gpio regulator and gpio button/keyboard Denis Carikli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1382601665-6830-3-git-send-email-denis@eukrea.com \
--to=denis@eukrea.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).