From mboxrd@z Thu Jan 1 00:00:00 1970 From: mpa@pengutronix.de (Markus Pargmann) Date: Tue, 29 Oct 2013 08:47:48 +0100 Subject: [PATCH v5 4/5] dma: mxs-dma: Update state after channel reset In-Reply-To: <1383032869-12863-1-git-send-email-mpa@pengutronix.de> References: <1383032869-12863-1-git-send-email-mpa@pengutronix.de> Message-ID: <1383032869-12863-5-git-send-email-mpa@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org After a channel reset, the channel stops running automatically. The state update was missing so that a channel perperation right after a channel reset failed. Signed-off-by: Markus Pargmann --- drivers/dma/mxs-dma.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c index 5302670..f48f87f 100644 --- a/drivers/dma/mxs-dma.c +++ b/drivers/dma/mxs-dma.c @@ -235,6 +235,8 @@ static void mxs_dma_reset_chan(struct mxs_dma_chan *mxs_chan) writel(1 << (chan_id + BP_APBHX_CHANNEL_CTRL_RESET_CHANNEL), mxs_dma->base + HW_APBHX_CHANNEL_CTRL + STMP_OFFSET_REG_SET); } + + mxs_chan->status = DMA_COMPLETE; } static void mxs_dma_enable_chan(struct mxs_dma_chan *mxs_chan) @@ -362,7 +364,7 @@ static irqreturn_t mxs_dma_int_handler(int irq, void *dev_id) chan); mxs_chan->status = DMA_ERROR; mxs_dma_reset_chan(mxs_chan); - } else { + } else if (mxs_chan->status != DMA_COMPLETE) { if (mxs_chan->flags & MXS_DMA_SG_LOOP) mxs_chan->status = DMA_IN_PROGRESS; else -- 1.8.4.rc3